1. Introduction
The FENVI WiFi 6 AX1500 Wireless WiFi Repeater is designed to extend your existing wireless network coverage, eliminating WiFi dead zones and providing a stronger, more reliable signal throughout your home or office. This device supports the latest WiFi 6 (802.11ax) standard, offering high-speed dual-band connectivity (2.4GHz and 5GHz) for a seamless internet experience. It can operate as a WiFi Repeater or an Access Point (AP).
2. Specifications
| Feature | Detail |
|---|---|
| Model Name | AX1500 |
| Chipset | RTL8197FH+RTL8832B |
| Interface | 1* 10/100Mbps LAN Port |
| Wireless Speed (2.4G) | 300Mbps |
| Wireless Speed (5.8G) | 1200Mbps |
| Frequency Band Class | Dual-Band (2.4G & 5G) |
| Wireless Communication Standard | 802.11ax |
| Wireless Transmit Power | 20dBm (MAX EIRP) |
| Antenna | 4* 2dBi External Antennas (Fixed) |
| Work Mode | Repeater / AP |
| Supports WPS | No |
| Application | Home |
| Package Dimensions (L x W x H) | 10cm x 10cm x 7cm |
| Package Weight | 0.125 kg |
3. Package Contents
Please check the package for the following items:
- FENVI WiFi 6 AX1500 Wireless WiFi Repeater
- User Manual (PDF version available online)
4. Setup Instructions (Repeater Mode)
Follow these steps to set up your WiFi Repeater:
- Power On: Plug the WiFi extender into a power outlet. Wait approximately 30 seconds for it to boot up.
- For AX1800/AC1200 models: The LED light will change from Green to Blue.
- For AX3000/AX1500 models: The LED light will change to Red.
- Connect to Extender SSID: On your phone or computer, search for available WiFi networks. Connect to the extender's SSID, which will typically appear as "Fenvi-XXXX" (where XXXX is a unique identifier).
- Important: Turn off your mobile network data to ensure you connect to the extender's WiFi. If your device prompts that the network cannot be connected, click to continue.
- If you click 'connect' on your phone and no interface appears, manually enter
192.168.188.1in your browser. - Select Main Router: Once connected, a setup page should appear. Select the WiFi SSID of your main router that you wish to extend. If the SSID doesn't appear, refresh the page.
- Enter Main Router Password: Enter the WiFi password of your main router into the provided box. Click "Next".
- Set New Wireless Names (Optional): You can set new wireless names and passwords for the extended network (e.g., original SSID-PRO-2.4G or original SSID-PRO-5G). If you don't want to modify, proceed to the next step.
- Confirm Settings: Confirm the new wireless names and passwords. Click "Start Connect" and wait 30-60 seconds for the extender to connect to the router.
- Wait for Connection: Wait approximately 60 seconds. After the setting is completed, observe the signal indicator. If it lights up, the relay is successful.
- Success Indication: The indicator lights on the device will confirm the WiFi Extender has been set up. A green light indicates a strong signal.
- Reconnect to Extender WiFi: Reselect and reconnect to your extender WiFi hotspot. The new WiFi name defaults to the original WiFi name plus a suffix like PRO-2.4G or PRO-5G.
5. Operating Modes
The FENVI AX1500 supports two main operating modes:
5.1. Repeater Mode (Extend WiFi Coverage)
In Repeater Mode, the device wirelessly connects to your existing router and extends its signal to areas with weak or no coverage. This is the default and most common mode for expanding your WiFi network.
5.2. AP Mode (Access Point)
In AP Mode, the device connects to your router via an Ethernet cable (plugged into the LAN port) and then broadcasts a new wireless network. This mode is ideal for turning a wired network connection into a wireless one, providing WiFi access in areas where only wired connections are available.
- Reset Device: If you need AP mode, first perform a factory reset (see Maintenance section).
- Access AP Settings: Follow steps 1-2 of the Repeater Mode setup. On the setup page, click on "AP Settings" or similar option.
- Set Wireless Password: Configure the wireless name and password for the new AP network. Click "Apply".
- Connect Ethernet Cable: Plug an Ethernet cable from your main router into the LAN port of the extender. You can then access the internet wirelessly via the new AP network.
6. Troubleshooting
- My Wi-Fi says connected but I have no internet connection.
- Check if your main router's Wi-Fi is actively working.
- If the Extender indicator light keeps flashing off, the connection failed. This could be due to an incorrect password or other reasons. Try restoring factory settings by pressing the RST button for about 10 seconds and set up the Extender again.
- What is the username and password for setting up the Extender?
- No username or password is required to enter the setting webpage initially. After setup, you cannot enter the setting page unless you restore factory settings by pressing the RESET/WPS button for 10 seconds.
- Why are some devices (Printer, CCTV, camera, TV, Phone) unable to connect to the Extender?
- This means the device does not recognize the Extender. The device should be on the same network as your main router.
- Why am I unable to enter the webpage?
- You cannot enter the setup webpage with URL
192.168.188.1after extender setting. Press the RESET/WPS button for about 10 seconds to restore factory settings and then try again. - Check if you have connected to the Extender's WIFI during setup.
- Disable your mobile's data during setup.
- Use another mobile or PC to try.
- You cannot enter the setup webpage with URL
7. Maintenance
7.1. Factory Reset
If you encounter persistent issues or wish to reconfigure the device, you can perform a factory reset:
- Locate the "RST" button on the side of the product.
- Press and hold the "RST" button for 8-10 seconds.
- The green and red lights of the product will flash alternately for ten seconds, and finally return to the initial red light, indicating a successful reset.
7.2. General Care
- Keep the device in a cool, dry place, away from direct sunlight and heat sources.
- Do not expose the device to water or moisture.
- Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
8. User Tips
- Speed Considerations: While the device is rated for high speeds, actual throughput may vary. Some users have noted that the effective speed in both 2.4GHz and 5GHz bands might be limited by the backhaul connection to the main router, potentially resulting in speeds around 30-40Mbps. If you require high stability and low latency for demanding tasks, consider the placement of the repeater and the quality of the signal it receives from your main router.
- Optimal Placement: For best performance, place the repeater halfway between your router and the area where you need improved WiFi coverage. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
- Signal Indicator: Pay attention to the LED signal indicator during setup and operation. A green light typically indicates a good signal, while other colors or flashing patterns may suggest a weaker connection or an issue.
9. Warranty and Support
For warranty information and technical support, please refer to the official product page or contact the seller directly. A detailed user manual in PDF format is also available for download from the product's online listing.
10. Safety Information
- Do not open the device casing.
- Use only the power adapter provided or specified by the manufacturer.
- Keep the device away from children.
- Ensure proper ventilation around the device to prevent overheating.