1. Introduction
This manual provides detailed instructions for the MCHOSE G98 V2pro Tri-Mode Mechanical Keyboard. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience. The G98 V2pro is a customizable mechanical keyboard designed for both esports and office use, featuring tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth), a one-key calculator, a volume function knob, and a long-lasting battery.
2. Safety Information
Please read and follow these safety guidelines to prevent damage to the device and ensure safe operation:
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Battery and Charging Precautions:
- It is recommended to charge the keyboard only using a computer's USB interface.
- Do not use fast-charging mobile phone chargers to charge the keyboard.
- Do not use non-standard power adapters to charge the keyboard.
- Use a power adapter with over-voltage and over-current protection for charging.
- Do not use the device while charging.
- Turn off the power switch when not in use for a long time.
- These charging instructions also apply to other devices with charging functions (keyboard, mouse, headphones, etc.).
3. Package Contents
Please check the box for the following items:
- 1 x MCHOSE G98 V2pro Mechanical Keyboard
- 1 x User Manual & Certificate
- 1 x Keycap/Switch Puller
- 2 x Spare Switches
- 1 x Dust Cover
- 1 x Data Cable (USB Type-C)
4. Setup and Connection
The MCHOSE G98 V2pro supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. Use the mode switch located on the keyboard to select your preferred connection type.
4.1. Wired Connection
- Set the mode switch to the OFF position.
- Connect the Type-C data cable to the keyboard's port and the other end to your computer's USB port.
- The keyboard will be ready for use.
4.2. 2.4G Wireless Connection
- Set the mode switch to the 2.4G position.
- Take out the 2.4G receiver from its magnetic storage slot on the keyboard.
- Insert the receiver into an available USB port on your computer.
- The keyboard will automatically pair. If pairing manually (e.g., after factory reset), press FN + 5. The indicator light will flash rapidly during pairing and remain on for 2-5 seconds upon successful connection.
4.3. Bluetooth Connection
- Set the mode switch to the BT position.
- Press FN + 1, FN + 2, or FN + 3 to select a Bluetooth channel. The indicator light will flash rapidly, indicating pairing mode.
- On your device (computer, tablet, smartphone), search for "MCHOSE G98 V2pro" in the Bluetooth settings and connect.
- Once connected, the indicator light will remain on for 2-5 seconds.
- You can switch between paired Bluetooth devices by pressing FN + 1, FN + 2, or FN + 3.
5. Operating Instructions
5.1. FN Combination Keys
The keyboard features various FN key combinations for enhanced functionality:
| Key Combination | Function |
|---|---|
| FN + ESC (long press 3-5s) | Restore default settings |
| FN + \ | | Switch lighting mode |
| FN + TAB | Switch lighting color |
| FN + ↑ | Increase light brightness |
| FN + ↓ | Decrease light brightness |
| FN + ← | Decrease light speed |
| FN + → | Increase light speed |
| FN + Right Shift | Switch ambient light strip mode |
| FN + ? | Switch ambient light strip color |
| FN + B | Switch ambient light strip to battery mode |
| FN + Right Alt | Cycle ambient light strip brightness |
| FN + Right Ctrl | Cycle ambient light strip speed |
| FN + Win | Toggle Win/Mac/Android system compatibility |
| FN + F1-F12 | Multimedia functions (e.g., Play/Pause, Volume Up/Down, Mute) |
5.2. Smart One-Key Calculator
The keyboard features a dedicated key to quickly access the calculator function, enhancing productivity for office tasks.
5.3. Volume Function Knob
The integrated volume knob provides convenient control over audio output:
- Swipe up: Increase volume.
- Swipe down: Decrease volume.
- Press down: Mute/unmute audio.
5.4. Battery Status Check
In 2.4G/Bluetooth mode, you can check the battery level:
- Press FN + B to switch the ambient light strip to battery mode.
- A red indicator light signifies low battery.
- A green indicator light signifies high battery.
5.5. Sleep Function
In wireless (2.4G/Bluetooth) mode, the keyboard will enter power-saving sleep mode after one minute of inactivity. Press any key to wake it up.
6. Maintenance
6.1. Cleaning
- Use the provided dust cover when the keyboard is not in use to prevent dust accumulation.
- Gently wipe the keycaps and keyboard surface with a soft, dry cloth.
- For deeper cleaning, use the keycap puller to remove keycaps and clean underneath with compressed air or a soft brush.
6.2. Battery Care
- Follow the charging precautions outlined in the Safety Information section.
- Avoid fully discharging the battery frequently.
- If storing the keyboard for an extended period, ensure it has a partial charge (around 50%) and turn off the power switch.
7. Troubleshooting
7.1. Keyboard Not Responding
- Wired Mode: Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4G Wireless Mode:
- Check if the mode switch is set to "2.4G".
- Ensure the 2.4G receiver is properly inserted into a USB port.
- Try re-pairing by pressing FN + 5.
- Check battery level; charge if low.
- Bluetooth Mode:
- Check if the mode switch is set to "BT".
- Ensure Bluetooth is enabled on your device.
- Try re-pairing by selecting the desired channel (FN + 1/2/3) and connecting from your device's Bluetooth settings.
- Check battery level; charge if low.
7.2. Input Lag or Disconnections
- For wireless modes, ensure the keyboard is within range of the receiver/device.
- Minimize interference from other wireless devices (e.g., Wi-Fi routers, other 2.4G devices).
- Ensure the keyboard battery is sufficiently charged.
- Consider using wired mode for critical tasks or gaming if wireless performance is inconsistent.
7.3. Lighting Issues
- Use FN + \ | to cycle through lighting modes.
- Use FN + TAB to change lighting colors.
- Adjust brightness with FN + ↑ / ↓.
- If lighting is completely off, check if it's disabled via software or if the battery is critically low.
7.4. Keys Not Working / Hot-Swapping
- If a specific key is not working, it might be a faulty switch. The keyboard supports hot-swappable switches.
- Use the provided keycap/switch puller to carefully remove the keycap and then the switch.
- Replace the faulty switch with one of the spare switches provided or a compatible mechanical switch.
- Ensure the new switch is aligned correctly and pressed firmly into the socket.
8. Specifications
Below are the detailed specifications for the MCHOSE G98 V2pro Mechanical Keyboard:
| Feature | Specification (G98 V2pro) |
|---|---|
| Version | G98 V2 |
| Layout | 98 Layout, 100 Keys |
| Available Colors | Mist Peach Gradient, Blackberry Pink, Semi Extreme Black, Star Sea Blue (with Flame Orange Axis or Ice Blue Axis options), Glass Purple (Pro version) |
| Switch Types | Inferno Orange Switch (Linear, TTC), Ice Blue Switch (Linear, Huan Nuo), Cabbage Tofu Axis V2 (Linear, KTT Kangtengte) |
| Key Functions | Hidden 2.4G Magnetic Storage, Volume Knob, Smart One-Tap Calculator, All self-developed M HUB, Built-in Music Rhythm 2.0 |
| Battery Capacity | 10000mAh (G98 V2), 8000mAh (G98 base model) |
| Lighting Mode | MCHOSESOFTLIGHT Soft Lighting Technology (~16M RGB Colors) |
| Driver | Fully self-developed MHUB driver (client/web version) |
| Wireless Technology | MCHOSE®TOPSPEED Wireless Transmission Technology |
| Latency | 1ms Ultra-Low Latency (G98 V2), 3ms (G98) |
| Keycap Material | PBT Two-Color Injection, PBT Side-Engraved |
| Structure | GASKET structure |
| PCB Board | 1.2mm Single Key Slotted PCB (Lower Light Position) |
| Positioning Plate | Slotted PC positioning plate |
| Internal Fill | Sandwich cotton + IXPE under-axe pad + PET spacer + Base cotton + Molded silicone bottom pad |
| Connection Method | Wired, 2.4G Wireless, Bluetooth |
| Satellite Axis | McWill Customized Satellite Axis |
| Light Bar | RGB Tri-color Lighting |
| Ergonomics | Supports ergonomics, "Golden Angle" design, dual-stage adjustable kickstand |
| Compatible Platforms | Windows, Android, macOS |
Switch Specifications:
- Inferno Orange Switch (Linear Shaft - TTC):
- Trigger force: 45±5gf
- Trigger stroke: 1.8±0.3mm
- Total stroke: 3.6±0.3mm
- Ice Blue Switch (Linear Rail - Huan Nuo):
- Actuation force: 35±8gf
- Trigger stroke: 2.0±0.4mm
- Total travel: 3.6±0.4mm
- Cabbage Tofu Axis V2 (Linear Shaft - KTT Kangtengte):
- Trigger force: 45±5gf
- Actuation travel: 1.9±0.3mm
- Total travel: 4.0±0.5mm
9. User Tips
- For optimal wireless performance, keep the 2.4G receiver or Bluetooth-connected device close to the keyboard.
- Experiment with different RGB lighting modes and colors using the FN key combinations to personalize your setup.
- Utilize the M HUB driver (client or web version) for advanced customization of key assignments, macros, and lighting effects. Links: M HUB Client Driver, M HUB Web Driver.
- Take advantage of the hot-swappable switches to try different switch types or replace worn-out switches easily.
- The one-key calculator is a great time-saver for quick calculations during work or study.
10. Frequently Asked Questions (FAQ)
Q: How do I switch between wired, 2.4G, and Bluetooth modes?
A: Use the physical mode switch located on the keyboard to select between OFF (wired), 2.4G, and BT modes.
Q: Can I customize the key functions and lighting?
A: Yes, the MCHOSE G98 V2pro is fully customizable. You can use the M HUB driver (client or web version) to remap keys, create macros, and adjust RGB lighting effects. Basic lighting adjustments can also be done via FN key combinations.
Q: What is the battery life like?
A: The G98 V2pro model features a 10000mAh battery for long-lasting use. Actual battery life may vary depending on usage, lighting settings, and connection mode.
Q: Is the keyboard compatible with Mac?
A: Yes, the keyboard is compatible with Windows, Android, and macOS. Use the FN + Win key combination to switch between operating system layouts if needed.
11. Warranty and Support
For detailed warranty information and technical support, please refer to the official MCHOSE website or contact your retailer. The included User Manual & Certificate may contain specific warranty terms.
For further assistance, you may also refer to the comprehensive PDF user manual available at: MCHOSE G98 V2 User Manual (PDF).