1. Product Overview
The POLVCDG H50 Bone Conduction Earphones are designed for active lifestyles, featuring IPX8 deep waterproofing, 32GB built-in memory for offline music, and a night light for enhanced safety during evening activities. These earphones provide an open-ear listening experience, making them suitable for various sports including swimming, running, and cycling.

Image: POLVCDG H50 earphones with glowing lights, indicating enhanced safety for night exercise.

Image: POLVCDG H50 earphones shown in use during swimming, running, and cycling activities.
2. Package Contents
Ensure all items are present in your package:
- Outer envelope
- Inner box
- POLVCDG-H50 Earphones
- Accessory box
- User Manual
- Magnetic Charging Wire
- POLVCDG elastic strip

Image: Illustration of the POLVCDG H50 product packaging and its contents, including the earphones, charging cable, and manual.
3. Setup Instructions
3.1 Charging the Earphones
Before first use, fully charge the earphones. When the voice prompt indicates low battery, charge the earphones promptly.
- Connect the magnetic charging cable to the magnetic charging port on the earphones.
- During charging, the red indicator light will be solid.
- Once fully charged (approximately 2 hours), the blue indicator light will be solid.
- The device will automatically shut down during the charging process.
- Note: Magnetic charging requires correct positive and negative pole alignment. Ensure the cable attracts to the port for proper charging. If it repels, charging will not occur and may cause a short circuit.
- Recommended Charger: DC5V +/- 0.25V output voltage, 100mA-500mA output current. Using a charger above 5V1A may cause overheating and damage to the battery or motherboard.

Image: Illustration of the magnetic fast charging mechanism, highlighting the 2-hour charging time.
3.2 Power On/Off
- Power On: Long press the Power button for 3 seconds. The blue and red indicator lights will flash alternately.
- Power Off: Long press the Power button for 5 seconds. The red indicator light will flash and then turn off.
3.3 Bluetooth Pairing
- When powered on, the earphones automatically enter pairing mode, indicated by alternating blue and red lights.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for