1. Introduction
Thank you for purchasing the TAONUANSHU T-A-001 Modern Gray Glass LED Suspension Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read it thoroughly before installation and keep it for future reference.
Image: The pendant light featuring multiple glass globes in a modern dining setting.
2. Safety Information
- Always turn off the power supply at the main circuit breaker before beginning any installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician or a competent person.
- Wear appropriate personal protective equipment, such as gloves, during installation and operation.
- Do not install in damp or undried environments.
- Ensure all electrical connections are secure and properly insulated to prevent electric shock.
- This fixture is designed for indoor use only.
- Use only LED bulbs with an E27 base as specified. Bulbs are not included.
3. Package Contents
Please check that all parts are present and undamaged before installation. If any parts are missing or damaged, contact your retailer.
- Lamp Body (Glass Shade and Metal Fixture)
- Mounting Bracket
- Ceiling Plate/Base
- Wire Connectors
- Screws and Nuts for Installation
- Instruction Manual
Note: E27 LED bulbs are NOT included and must be purchased separately.
4. Setup and Installation
Required Tools (Not Included):
- Gloves
- Screwdriver
- Voltage Tester
- Wrench
- Electric Hammer (if drilling into masonry)
- Electrical Tape
- Wire Nuts (additional, if needed)
- Expansion Bolts (if needed for ceiling type)
Image: Diagram illustrating installation tools and step-by-step instructions.
Installation Instructions:
- Position Mounting Bracket: During installation, first position the mounting bracket correctly on the ceiling before drilling holes.
- Secure Mounting Bracket: Ensure the mounting bracket is installed securely to the ceiling in the appropriate position.
- Wiring: When wiring, first connect the fixture's wires to the main power wires (Red = Live Wire, Blue = Neutral Wire) using wire connectors. Then, wrap securely with electrical tape to prevent electric shock.
- Install Ceiling Plate/Base: Install the ceiling plate/base, tightening the nuts and screws securely.
- Adjust Lamp Body and Test: Adjust the lamp body to the desired height and test the electricity. Ensure all bulbs are fully installed before conducting the electrical test.
- Install Remaining Parts: Install any remaining parts according to the lamp body diagram.
Important Warnings:
- Wear gloves during installation and operation.
- Prohibited to install in damp or undried environments.
- Do not perform installation with power on; turn off power when cleaning.
- Installation must strictly follow this factory installation manual.
5. Operating Instructions
Once properly installed and powered, your pendant light is ready for use.
- Turning On/Off: Operate the light using your wall switch.
- Switch Types: This fixture may be compatible with Knob switches, Remote Control, Touch On/Off Switches, or Sensor switches depending on your home's wiring and chosen setup.
- Dimmability: This fixture is NOT dimmable.
- Smart Device: This fixture is NOT a smart device.
6. Maintenance
- Cleaning: Always turn off the power supply before cleaning. Use a soft, dry cloth to wipe the glass shades and metal parts. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Ensure the power is off and the bulb has cooled before attempting to replace it. Unscrew the old E27 bulb and screw in a new one.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
7. Troubleshooting
- Light does not turn on:
- Check if the power supply is on at the main circuit breaker.
- Ensure the wall switch is in the 'ON' position.
- Verify that the bulb is correctly installed and not faulty.
- Check all wiring connections for looseness (ensure power is off before checking).
- Light flickers:
- Ensure the bulb is screwed in tightly.
- Check for loose wiring connections (ensure power is off before checking).
- Try a different bulb to rule out a faulty bulb.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | TAONUANSHU |
| Model Number | T-A-001 |
| Item Type | Pendant Lights |
| Style | ART DECO |
| Material | Glass Stone |
| Finish | Iron, Plated |
| Light Source | LED bulbs (E27 Base) |
| Bulbs Included | No |
| Number of Light Sources | 1 per pendant |
| Luminous Flux | 2000-82000 (depending on bulb) |
| Voltage | 90 - 260 V (AC) |
| Dimmable | No |
| Installation Type | Cord Pendant |
| Lighting Area | 5-10 square meters |
| Place of Use | Parlor, Study, Master Bedroom, other bedrooms, Hotel Hall, Hotel Room |
| Certifications | CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, UL, VDE, EAC |
| Package Length | 60 cm |
| Package Width | 60 cm |
| Package Height | 60 cm |
| Package Weight | 6.0 kg |
9. User Tips
- Color and Size Selection: When ordering, carefully review the available 'Body Color' options (Rose gold, Smoke gray, Cognac, Transparent) and 'Size' options (Dia15cm, Dia20cm, Dia25cm) to ensure you receive the desired configuration for your space.
- Bulb Choice: Since bulbs are not included, consider the desired light temperature (warm white, cool white, daylight) and brightness (lumens) when purchasing E27 LED bulbs to best suit your room's ambiance and functional needs.
10. Warranty and Support
This TAONUANSHU pendant light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For further assistance, troubleshooting, or warranty inquiries, please contact your retailer or the manufacturer's customer support.
An additional user manual in PDF format may be available for download from the seller's product page: View User Manual (PDF)