Bose BO-C1

Contents

Replacement Remote Control User Manual

For Bose Solo 10 & Solo 15 TV Sound Systems

1. Product Overview

This compact remote control (Model BO-C1) is a dedicated replacement for the Bose Solo 10 and Solo 15 Soundbars. It is designed to deliver convenient wireless control over your audio system without the need for programming or pairing. Simply insert the correct batteries, and it is ready to use, fully matching the original remote's functions.

Video 1: Product showcase of the replacement remote control.

2. Setup and Battery Installation

Before using your new remote control, you will need to install batteries.

Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover open.
  3. Insert one CR2032 or CR2025 battery (not included) into the compartment. Ensure the positive (+) and negative (-) poles are aligned correctly with the markings inside the compartment.
  4. Close the battery cover securely until it clicks into place.

The remote control is now operational.

Back of the remote control showing the battery compartment

Image 1: Rear view of the remote control, illustrating the battery compartment location.

3. Operating Instructions

This remote control provides essential functions for your Bose Solo 10 or Solo 15 Soundbar.

Button Functions

  • Power (Power icon): Press to turn the Bose Solo Soundbar on or switch it to standby mode.
  • Volume + (+): Increases the soundbar's audio output volume in incremental steps. Hold the button for continuous volume increase.
  • Volume - (-): Decreases the soundbar's audio output volume in incremental steps. Hold the button for continuous volume decrease.
  • Mute (Mute icon): Toggles the soundbar's audio output between mute and unmute instantly.
Front view of the remote control with power, volume, and mute buttons

Image 2: Front view of the remote control, displaying all functional buttons.

Angled view of the remote control highlighting button layout

Image 3: Angled view of the remote control, showing the ergonomic design and button placement.

4. Maintenance

Cleaning

  • Clean the remote control's surface with a soft, dry cloth only.
  • Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the remote's finish or internal components.

Storage

  • Keep the remote control in a dry, cool environment when not in use.
  • Avoid exposure to moisture, extreme temperatures, direct sunlight, or physical impacts, which can shorten the lifespan of the device.

Battery Replacement

  • Replace the batteries if the remote control's response becomes delayed, intermittent, or stops working entirely.
  • Always use fresh, high-quality CR2032 or CR2025 batteries for optimal performance.

5. Troubleshooting

  • No response from the remote:
    • Verify that the batteries are installed correctly with proper polarity.
    • Replace depleted batteries with new ones.
    • Ensure no obstacles block the infrared (IR) signal path between the remote control and the soundbar.
  • Intermittent operation:
    • Move closer to the soundbar (within the effective operating range of 8-10 meters).
    • Reduce interference from other IR devices or bright light sources in the room.
  • Incompatibility issues:
    • Confirm that the remote control is being used exclusively with the Bose Solo 10 or Solo 15 Soundbar models. It is not compatible with other Bose soundbar or speaker models.

6. Specifications

Model NumberBO-C1
CompatibilityBose Solo 10, Bose Solo 15 TV Sound Systems
Wireless CommunicationInfrared (IR)
UseAudio / Video Players
ColorBlack
MaterialABS
Battery Type1 x CR2032 or CR2025 (not included)
Effective Operating RangeApproximately 8-10 meters (26-33 feet) in a clear line of sight
OriginMainland China

7. User Tips

  • Direct Line of Sight: For optimal performance, always point the remote directly at the infrared (IR) sensor on your Bose Solo Soundbar. Any obstructions can block the signal.
  • Battery Quality: Using reputable brand batteries can prevent intermittent operation and ensure a longer lifespan for your remote.
  • Match Your Old Remote: Before purchase, ensure your old remote control visually matches the images of this replacement remote to confirm compatibility.

8. Warranty and Support

For any issues, questions, or support needs regarding your replacement remote control, please contact the seller directly through your purchase platform. They will be able to provide assistance and information regarding any applicable warranty or return policies.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.