Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of the JGINYUE X99M GAMING D4/ARGB motherboard. Designed for Intel LGA 2011-3 processors, this motherboard supports Xeon E5 V3/V4 CPUs and DDR4 RAM, offering robust performance for various computing needs including gaming, audio/video production, and server applications.
For a downloadable PDF version of this manual, please refer to the User manual (PDF).
Specifications
The JGINYUE X99M GAMING D4/ARGB motherboard features a Micro-ATX form factor and is built around the Intel X99 chipset. Key specifications are detailed below:

| Feature | Specification |
|---|---|
| Brand Name | JGINYUE |
| Socket Type | LGA 2011-3 |
| Chipset | Intel X99 |
| Processor Compatibility | Intel Xeon E Series (E5 V3/V4) |
| Form Factor | Micro-ATX |
| Number Of Memory Slots | 4 |
| Support Memory Type | DDR4 |
| Memory Channel | Four |
| Maximum RAM Capacity | 128 GB |
| Storage Interface Type | SATA 3, M.2 (NVMe) |
| Number of SATA Ports | 4 |
| Number of PCIe x 16 | 1 |
| Number of PCIe x 1 | 2 |
| PCI - E standards | PCI-E 3.0 |
| Back I/O Ports | 1x RJ45, PS/2 Combo, USB 3.0, USB 2.0, Audio Jacks |
| Onboard LAN | 1x RJ45 |
| Usage Scenario | Enthusiast & Overclocking, Gaming, Audio & Video, Household, Office, Video Production, Server, Mini PC |
| Battery Included | Yes (CMOS battery) |
| Certification | RoHS, CSA, CE |
Setup
Before beginning installation, ensure your workspace is clean, well-lit, and static-free. It is recommended to wear an anti-static wrist strap.

1. Component Installation
- CPU Installation:
Carefully open the LGA 2011-3 CPU socket lever. Align the triangular mark on your Intel Xeon E5 V3/V4 CPU with the corresponding mark on the socket. Gently place the CPU into the socket without forcing it. Close the lever to secure the CPU.

A close-up top-down view of the JGINYUE X99M GAMING D4/ARGB motherboard, highlighting the LGA 2011-3 CPU socket. - CPU Cooler Installation:
Apply thermal paste to the CPU (if not pre-applied on the cooler). Mount your compatible CPU cooler, ensuring it is securely fastened and the protective film (if any) has been removed from the cooler's base. Connect the CPU fan cable to the designated header on the motherboard.
- RAM Installation:
Open the clips on the DDR4 memory slots. Align the notch on your DDR4 RAM module with the key in the slot. Press firmly on both ends of the RAM module until the clips snap into place. For quad-channel operation, refer to your CPU cooler's manual for recommended slot population, typically populating slots 1, 2, 3, and 4 or specific color-coded slots.

An angled view of the JGINYUE X99M GAMING D4/ARGB motherboard, showing the four DDR4 RAM slots. - Storage Device Installation (M.2 NVMe / SATA):
For M.2 NVMe SSDs, insert the SSD into the M.2 slot at an angle and secure it with the provided screw. For SATA drives, connect the SATA data cable to one of the 4 SATA 3 ports on the motherboard and the SATA power cable from your power supply to the drive.
- Graphics Card Installation:
Open the retention clip on the PCIe x16 slot. Insert your graphics card firmly into the slot until it clicks into place. Secure the card to your case with a screw. Connect the necessary PCIe power cables from your power supply to the graphics card.
2. Power Connections
- Connect the 24-pin ATX power connector from your power supply to the main power socket on the motherboard.
- Connect the 8-pin (or 4+4 pin) EPS 12V CPU power connector from your power supply to the CPU power socket near the CPU.
- Ensure all power cables are firmly connected.
3. Front Panel and Peripheral Connections
- Connect your case's front panel connectors (Power SW, Reset SW, HDD LED, Power LED) to the corresponding pins on the motherboard. Refer to the motherboard diagram for correct pin assignments.
- Connect USB 2.0 and USB 3.0 headers from your case to the motherboard.
- Connect audio cables from your case to the front panel audio header.
- Connect peripherals (keyboard, mouse, monitor) to the rear I/O ports. Ensure your monitor is connected to the discrete graphics card if one is installed, not the motherboard's video output (as Xeon E5 CPUs typically lack integrated graphics).

4. Initial Boot and Driver Installation
- After assembling all components, connect your power supply to a wall outlet and turn on the power supply switch.
- Press the power button on your case. The system should power on.
- During startup, repeatedly press the Del key (or as indicated on screen) to enter the BIOS setup utility.
- Install your operating system.
- Driver Installation:
- WiFi/Bluetooth Drivers: For models like B650M Night Devil WiFi (and similar JGINYUE AM4/AM5 motherboards which use the same WiFi network card model), visit www.jginyue.com and search for "B650M Night Devil WiFi" to find MediaTek MT7902 WiFi and Bluetooth drivers.
- Graphics Card Drivers: Before installing new graphics card drivers, it is recommended to uninstall any old drivers from a previous system to prevent conflicts.
Operating
BIOS/UEFI Settings
The BIOS (Basic Input/Output System) or UEFI (Unified Extensible Firmware Interface) is the first software your computer runs when it starts. It manages hardware initialization and provides basic system functions.
- Accessing BIOS: During system startup, repeatedly press the Del key (common for JGINYUE) to enter the BIOS setup.
- Boot Order: Configure the boot order to prioritize your operating system drive.
- SATA Mode: Ensure the SATA mode is set correctly (e.g., AHCI for most modern SSDs/HDDs).
- Memory Configuration (XMP/EXPO): If using high-speed DDR4 RAM, enable XMP (Extreme Memory Profile) in the BIOS to run your memory at its advertised speeds.
- Overclocking: The motherboard supports overclocking for compatible CPUs and RAM. Exercise caution and research proper overclocking procedures to avoid system instability or damage.
Maintenance
- CMOS Battery: If BIOS settings reset after every restart, the CMOS battery (3V CR2032) may need replacement.
- Driver Updates: Regularly check the JGINYUE website for the latest BIOS and driver updates to ensure optimal performance and compatibility.
- Physical Inspection: Periodically inspect the motherboard for dust accumulation, loose connections, or any signs of damage (e.g., bulging capacitors). Clean dust with compressed air.
- CPU Cooler: Ensure the CPU cooler remains securely installed and free of dust to maintain effective cooling.
Troubleshooting
This section addresses common issues you might encounter with your JGINYUE X99M GAMING D4/ARGB motherboard.
1. System Won't Power On/No Boot
Problem Description: The system shows no response after pressing the power button.
Troubleshooting Steps:
- Check if the CPU and graphics card power cables are correctly connected.
- Ensure the monitor signal cable is plugged into the correct port (e.g., plugged into the discrete graphics card, not the motherboard video port, as Xeon E5 CPUs typically lack integrated graphics).
- Verify that the RAM modules are fully seated and are compatible (e.g., avoid using server RAM or mixing different brands of RAM).
- Check for BIOS settings issues (e.g., EXPO/XMP overclocking failure).
- Verify all necessary components are installed (Motherboard, CPU, compatible RAM, SSD, a discrete GPU if the CPU does not have integrated graphics, PSU, CPU cooler, case).
- Confirm that the main motherboard power connector is firmly connected. Make sure the power supply and power strip switches are turned on.
- For B850M Snow Dream WIFI/B650M Snow Dream/B650M Night Devil/B650E Snow Dream models only: Pay special attention to removing any excess screw standoffs from the bottom of the case. This prevents excess standoffs from coming into contact with the motherboard PCB and causing a short circuit.
2. BIOS Issues
Problem Description: BIOS settings reset after every restart.
Troubleshooting Steps:
- Install or replace the CMOS battery (Model: 3V CR2032).
- Reconfigure the BIOS settings and save them.
- Check the motherboard's power capacitors for any signs of bulging.
3. Memory Issues
Problem Description: The system does not recognize the installed memory.
Troubleshooting Steps:
- Verify if the RAM modules are compatible with the motherboard (For DDR4 RAM, it is recommended to use Hynix, Micron, Samsung, Kingston, G.SKILL, ADATA, Team Group, Kingbank, or Keymos RAM chips).
- Reinstall the RAM modules, ensuring the golden fingers make good contact.
- Test with a single RAM module to isolate a faulty one.
- Check the memory XMP/EXPO configuration in the BIOS.
4. Graphics Card Not Recognized
Problem Description: No display output after installing a discrete graphics card.
Troubleshooting Steps:
- Ensure the graphics card is properly seated in the PCIe slot.
- Check if the power cables are connected to the graphics card.
- Try using the CPU's integrated graphics for troubleshooting (if your CPU has it, though Xeon E5 V3/V4 typically do not).
- Update the motherboard BIOS to the latest version.
5. System Instability/Frequent Crashes
Problem Description: The system frequently crashes or restarts during operation.
Troubleshooting Steps:
- Check if the CPU cooler is installed correctly and if the protective film on the cooler has been removed.
- Verify if the memory is overclocked; try restoring it to default frequencies in BIOS.
- Update the motherboard BIOS to the latest version.
- Check if the power supply unit (PSU) provides enough power for the system load.
- Check if the SSD has driver conflicts caused by drivers from an old computer.
6. Cannot Enter BIOS
Problem Description: Unable to enter the BIOS setup interface after powering on.
Troubleshooting Steps:
- Confirm that the correct key (usually Del) is pressed during startup.
- Try clearing the CMOS (via jumper or by removing the battery for a few minutes) and then reconfigure settings.
- Check if the keyboard connection is functioning properly.
7. Cannot Boot from Hard Drive
Problem Description: The system fails to boot from the installed hard drive.
Troubleshooting Steps:
- Enter the BIOS and check the boot order.
- Confirm that the hard drive is properly installed and connected.
- Check the SATA mode setting in the BIOS.
User Tips
- Overclocking Potential: This motherboard is noted by users for its overclocking capabilities, especially when paired with Xeon E5 V4 CPUs. Ensure adequate cooling and stable power delivery if attempting overclocking.
- True Quad Channel: The board supports true quad-channel memory, which can significantly boost performance. Ensure you populate all four DIMM slots with compatible DDR4 modules for optimal results.
- TPM 2.0 Support: The motherboard supports TPM 2.0 via a separate module (not included). If you require TPM functionality, you will need to purchase and install a compatible MSI-brand TPM module.
- Size Consideration: While Micro-ATX, some users note it's on the larger side for the form factor. Verify case compatibility before installation.
Frequently Asked Questions (FAQ)
- Q: Does the motherboard come with a TPM module?
- A: No, the motherboard does not include a TPM module. You will need to purchase a separate TPM module, such as one from the MSI brand, if you require this functionality.
Warranty and Support
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. For technical support and the latest drivers and BIOS updates, please visit the official JGINYUE website at www.jginyue.com.
A comprehensive user manual in PDF format is available for download: User manual (PDF).