LAUNCH LTR-03

Contents

LAUNCH LTR-03 TPMS Sensor User Manual

315MHz/433MHz Dual Frequency Programmable Tire Pressure Monitor System Sensor

1. Product Overview

The LAUNCH LTR-03 TPMS Sensor is a dual-frequency (315MHz/433MHz) programmable sensor designed to replace original tire pressure sensors in a wide range of vehicles. It features unlimited data reading and writing, an adjustable angle for optimal fit, and robust construction for reliable performance.

LAUNCH LTR-03 TPMS Sensor with packaging

Figure 1: LAUNCH LTR-03 TPMS Sensor and packaging.

LTR-03 RF Sensor features: high precision, cold resistant, high temperature resistant, long battery life

Figure 2: Key features of the LTR-03 RF Sensor.

Comprehensive vehicle coverage for American, European, and Asian cars

Figure 3: LTR-03 sensor offers comprehensive vehicle coverage.

2. Setup and Installation

2.1 Product Requirements

To effectively use and program the LAUNCH LTR-03 TPMS Sensor, you will need:

  • LAUNCH LTR-03 TPMS Sensor(s)
  • A compatible key programmer (e.g., LAUNCH key programmer)
  • USB to TYPEC adapter (if required for your programmer)

2.2 Sensor Features for Installation

  • Unlimited Reading & Writing Data: The LTR-03 supports unlimited data read and write, allowing you to remove a used sensor and switch it to another tire or vehicle.
  • Adjustable Angle: The angle of the LTR-03 sensor part is adjustable, enabling you to set the appropriate angle according to the specific situation inside the wheel hub for a perfect fit.
Diagram showing unlimited reading/writing data and adjustable angle for the LTR-03 sensor

Figure 4: LTR-03 sensor features unlimited data handling and adjustable angle.

2.3 Physical Installation Steps

Caution: The bead loosener must be facing the valve during installation.

  1. Loose the tire: Remove the valve cap and core, and deflate the tire.
  2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
  3. Dismount the sensor: With a screwdriver, remove the fastening screw and sensor from the valve stem, then loosen the nut and remove the valve.
  4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
  5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Diagram illustrating the 5-step installation process for the TPMS sensor

Figure 5: Step-by-step guide for TPMS sensor installation.

3. Operating Instructions (Programming)

The LAUNCH LTR-03 TPMS sensors are not pre-programmed and require a compatible TPMS programming tool to function correctly. Ensure your programming tool is updated to the latest software version.

3.1 Programming Super Chips

  1. Enter the menu: On your key programmer, navigate to the [Set type of super chip] menu.
  2. Select chip type: Choose the corresponding key chip type from the list (e.g., ID7937, ID7938 (ID47), ID7939 (ID49), ID7946, ID48, ID4A, ID4C, MQB, ID4D).
  3. Insert super chip: Insert the super chip into the anti-theft induction coil of the programmer.
  4. Generate: Follow the on-screen prompts to generate the chip. A successful setup will be indicated.
Key programmer screen showing 'Set type of super chip' menu

Figure 6: 'Set type of super chip' menu on the key programmer.

Key programmer with chip inserted, showing blue light for successful connection

Figure 7: Key programmer with a chip inserted, indicating successful connection.

3.2 Programming LE Ford Super Remotes

  1. Enter Vehicle Remote menu: On your key programmer, navigate to the [Vehicle Remote] menu.
  2. Select remote: Choose the corresponding LE Ford super remote model from the list (e.g., Skoda 1J0-959-753DJ 167, Skoda(202AD) 12-15, 1J0 959 753 DA 02-10).
  3. Place sensor: Place the super remote key in the key programmer.
  4. Generate: Follow the on-screen instructions to generate the remote.
  5. Matching method & Note:
    • Use tools to enter [09-Central control unit].
    • Enter [10-Adjustment].
    • Input channel number [01], click [Read], click [Save].
    • Press any button of wanted programming remote, turn indicator light flashes twice, program successfully.
    • Click [Save].
    • If you want to program other remotes, please repeat steps 3, 4, 5.
Key programmer screen showing 'Vehicle Remote' menu for LE Ford super remotes

Figure 8: 'Vehicle Remote' menu for LE Ford super remotes.

3.3 Programming LS Nissan Super Remotes

  1. Enter Vehicle Remote menu: Navigate to the [Vehicle Remote] menu on your programmer.
  2. Select smart key model: Choose the corresponding smart key model to generate (e.g., BYD Keyless Go ID46(Gray)).
  3. Place sensor: Place the smart remote key in the key programmer.
  4. Generate: Follow the on-screen instructions to generate the remote.
  5. Matching method & Note:
    • If smartness is difficult to use, generate the BYD black card.
    • Stable version, many vehicles can learn successfully, functions are normal.
    • Remove the battery to match.
    • Failed reasons: Check if card is writing correctly. Take the PCB out of the remote, remove the battery, match with the programmer.
Key programmer screen showing 'Vehicle Remote' menu for LS Nissan super remotes

Figure 9: 'Vehicle Remote' menu for LS Nissan super remotes.

3.4 Programming LN Peugeot DS Super Remotes

  1. Enter Vehicle Remote menu: Navigate to the [Vehicle Remote] menu on your programmer.
  2. Select electronic key model: Choose the corresponding electronic key model to generate (e.g., A05TAA 08-13 251).
  3. Place sensor: Place the electronic remote key in the key programmer.
  4. Generate: Follow the on-screen instructions to generate the remote.
  5. Matching method & Note:
    • Use wireless remote with NXP transponder.
    • Suitable for Honda Accord 2014, CRV, Fit, Odyssey (FSK, 433MHz).
    • Use OBD tools to learn remote. After programming chip successfully, the remote will generate automatically.
Key programmer screen showing 'Vehicle Remote' menu for LN Peugeot DS super remotes

Figure 10: 'Vehicle Remote' menu for LN Peugeot DS super remotes.

3.5 Programming for Car Models Without Electronic Keys

  1. Enter Set type of wireless remote: Navigate to the [Set type of wireless remote] menu.
  2. Generate key: Follow the on-screen instructions to generate the corresponding key.
Key programmer screen showing 'Set type of wireless remote' menu

Figure 11: 'Set type of wireless remote' menu.

3.6 Programming LK VW Super Remotes

  1. Enter Vehicle Remote menu: Navigate to the [Vehicle Remote] menu on your programmer.
  2. Select key model: Choose the corresponding key model to generate (e.g., Corolla 08-11 ASK 433, Corolla 08-12 ASK 433, Corolla 09-15 ASK 433, COROLLA (2012-2017)).
  3. Connect remote key: Connect the remote key to the programmer burning line.
  4. Generate: Follow the on-screen instructions to generate the remote.
Key programmer screen showing 'Vehicle Remote' menu for LK VW super remotes

Figure 12: 'Vehicle Remote' menu for LK VW super remotes.

3.7 Video Guide: Unboxing and Assembly

Video 1: Unboxing and assembly of the LAUNCH LTR-03 TPMS Sensor.

4. Maintenance

  • Battery Life: The LTR-03 sensor has an estimated battery life of 5 to 8 years. No user maintenance is required for the internal battery.
  • Cleaning: Keep the sensor free from excessive dirt and debris. Clean with a soft, dry cloth if necessary.
  • Storage: Store unused sensors in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

  • Sensor Not Detected/Incorrect Readings:
    • Ensure the sensor has been correctly programmed with a compatible TPMS tool.
    • Verify that the sensor is properly installed in the wheel.
    • Check for any interference from other electronic devices.
    • If using a key programmer, ensure the chip is correctly inserted and the connection is stable (indicated by a blue light).
    • If programming fails, try removing the PCB from the remote, removing the battery, and then attempting to match it with the programmer again.
  • Compatibility Issues: Refer to the FAQ section or contact customer support for specific vehicle compatibility.

6. Specifications

FeatureSpecification
ModelLTR-03 Metal Valve (Adjustable Angle)
Operating Frequency315MHz/433MHz
Battery Voltage3.0V
Working Temperature-40°C ~ 125°C
Storage Temperature-40°C ~ 125°C
RF Transmitter Power5 ~ 8dBm
Dimension50.8 x 24.0 x 17.8mm
Weight42g
IP RatingIP67
Battery Life5 ~ 8 Years
Pressure Reading Accuracy0.1Bar
Working Humidity<90%

7. Warranty and Support

For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer directly. A detailed user manual in PDF format is available for download: User Manual (PDF).

8. User Tips

  • Always use a compatible TPMS programming tool to program the LTR-03 sensors, as they are not pre-programmed.
  • The sensors are generally well-made and offer good quality for the price.
  • They are known to program well, even for older car models like Range Rover L322.
  • The LTR-03 sensors are compatible with many different car brands.

9. Frequently Asked Questions (FAQ)

Q: Do these sensors need to be configured or programmed?
A: Yes, the LTR-03 sensors are not pre-programmed. You must program them with a compatible TPMS programming tool before installation.
Q: Is a black color option available for the sensor?
A: No, a black color option is not available.
Q: Is the LTR-03 compatible with Ford Escape or Kuga 2021?
A: Yes, it is compatible.
Q: Is it compatible with Mercedes GLC 220?
A: Yes, it is compatible.
Q: Will it work with a Lexus LS460L 2010?
A: Yes, it is compatible.
Q: Is it compatible with Malibu 2014?
A: Yes, it is compatible.
Q: Does it work on a Golf GTI MK7 2015?
A: Yes, it works.
Q: Is it compatible with a 2011 Ford Mustang?
A: Yes, it works.
Q: Are these sensors suitable for BMW and Audi vehicles?
A: Yes, they are compatible.
Q: Is it comparable for BMW X5 f15 - 2015?
A: Yes, it is compatible.
Q: Does it work for Ford Explorer 2012 315mhz?
A: Yes, it supports it.
Q: Is it compatible with a 2021 Tesla Model 3?
A: Compatibility with Tesla vehicles cannot be determined by the manufacturer.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.