1. Introduction
Thank you for choosing the Milfra Tuya Zigbee Smart Wall Light Switch. This smart switch allows you to control your lights remotely via a mobile app, voice commands through smart assistants like Amazon Alexa and Google Home, and set schedules or scene patterns for automated lighting. It is designed for convenience, energy saving, and enhanced home automation.
This manual provides detailed instructions for the installation, setup, and operation of your smart switch. Please read it carefully before installation and keep it for future reference.
2. Safety Information
- **WARNING: RISK OF ELECTRIC SHOCK.** Installation should only be performed by a qualified electrician or a person with basic electrical wiring knowledge.
- Always cut off the power at the circuit breaker before installation, maintenance, or removal of the switch.
- Ensure the switch is compatible with your electrical system (AC100-240V, 50/60Hz).
- This switch supports one-way/single-pole circuits only and is not compatible with 3-way switches.
- The switch is designed to control lamps (LED Lamp: Max 150W, INC Lamp: Max 600W) and is not recommended for other electrical breakers.
- The ON/OFF button can also be used as a reset button. Long-pressing it will reset the switch to factory defaults, erasing all settings. Only do this if you intend to clear all configurations.
3. Package Contents
The package typically includes:
- Milfra Tuya Zigbee Smart Wall Light Switch (1, 2, or 3 Gang version)
- Mounting Screws
- User Manual (this document)
Image: Milfra Tuya Zigbee Smart Wall Light Switch, showing compatibility with Tuya, Zigbee, Google Assistant, and Amazon Alexa. Also indicates support for both 'No neutral' and 'Have neutral' wiring options.
4. Specifications
| Attribute | Value |
|---|---|
| Type | Smart Wall Light Switch |
| Model | KS-811 |
| Power Supply Mode | Neutral Wire Optional |
| Rated Current | 10A (Max) |
| Rated Voltage | AC100-240V~, 50/60Hz |
| Load Power (LED Lamp) | Max 150W |
| Load Power (INC Lamp) | Max 600W |
| Wireless Frequency | 2.4GHz |
| Wireless Standard | IEEE802.11b/g/n (Zigbee) |
| Product Size | 116*75*35mm |
| Battery Included | No |
| Inbox Adaptor | No |
| State of Assembly | Almost Ready |
| Certification | CE |
Image: Detailed product dimensions (75mm width, 116mm height, 35mm depth) and a table of specifications.
5. Setup and Installation
5.1 Pre-installation Notes
- The smart switch operates on a 2.4GHz Zigbee network (IEEE802.15.4 Zigbee). It is not compatible with 5.0GHz networks.
- Ensure your home network is 2.4GHz and your phone is connected to it during setup.
- This switch supports both neutral wire and no-neutral wire configurations. Refer to the wiring diagrams for your specific setup.
5.2 Physical Installation
- Turn off Circuit Breaker: Locate the circuit breaker controlling your light and turn it off. Verify power is off by flipping the light switch a few times.
- Find and Label Wires: In the wall cassette, identify and label the neutral wire (if present), live wire, and load wires.
- Install Switch: Connect the smart switch wires to your home wires using wire-nuts, following the appropriate wiring diagram below. Ensure line and load wires are correctly matched.
- Mount the Switch: Screw the switch into the wall cassette and attach the faceplate.
- Turn on Circuit Breaker: Restore power at the circuit breaker.
- Check Indicator Light: The indicator light on the switch should blink rapidly (2 times per second). If not, long-press the ON/OFF button for 7-10 seconds to reset the switch until it blinks rapidly.
Wiring Diagrams
The Milfra smart switch supports both neutral wire and no-neutral wire installations. Please identify your home's wiring configuration and follow the corresponding diagram.
Image: Wiring diagrams for Zigbee switches. Top diagram shows Neutral + Live Wire connection (Ground, Neutral, Live Wire, Load 1, Load 2, Load 3). Bottom diagram shows Single Wire connection (Ground, Live Wire, Load 1, Load 2, Load 3). Tips for wire identification are included: N: Neutral, L: Line, L1/L2/L3: Load, Ground.
Image: Wiring diagrams illustrating connection with a neutral wire and without a neutral wire. An important note states: "If there is no neutral wire in your house, please ignore the N position for wiring; if there is a neutral wire, just use it normally." It also shows that a capacitor is not required for this switch.
5.3 App Installation and Device Pairing
- Download the 'Smart Life' App: Search for 'Smart Life' in the Apple App Store or Google Play Store, or scan the QR code provided in the original user manual to download and install the app.
- Register/Login: If you are a new user, register an account using your email address or phone number. If you already have an account, simply log in.
- Add Device: In the Smart Life app, tap the '+' button in the top right corner to add a new device. Select 'Switch (Zigbee)' from the device list.
- Connect to Network: Ensure your phone is connected to a 2.4GHz Wi-Fi network. The app will guide you through the pairing process. The switch's indicator light should be blinking rapidly.
- Name the Switch: Once successfully added, you can give your switch a descriptive name. This name will be used for voice control with Amazon Alexa or Google Home.
Image: Screenshot showing the Smart Life app interface during the device pairing process, including options to add a device and confirm the indicator light status.
6. Operating Instructions
The Milfra Smart Switch offers multiple ways to control your lighting.
6.1 Physical Button Control
The switch features large physical buttons for direct ON/OFF control. Each button has an indicator light for status. The switch is available in 1-gang, 2-gang, and 3-gang configurations.
Video: A short demonstration of the Milfra Smart Switch, highlighting its physical buttons, internal wiring, and showing the 1-gang, 2-gang, and 3-gang variants.
6.2 Voice Control
Integrate your smart switch with Amazon Alexa or Google Home for convenient voice control. Once linked, you can use commands like:
- "Alexa, turn on the living room light."
- "Okay Google, turn off the kitchen light."
Image: A user interacting with Amazon Alexa to control the smart light switch via voice commands.
6.3 App Remote Control
Control your lights from anywhere using the Smart Life app on your mobile device. You can turn lights ON/OFF individually or control multiple switches simultaneously.
Image: A mobile phone displaying the Smart Life app interface, showing remote control functionality for the light switch.
6.4 Set Schedules and Timers
Automate your lighting by setting custom schedules and timers within the Smart Life app. For example, you can set lights to turn on at 6:00 AM and turn off at 19:00 PM.
Image: Screenshot of the Smart Life app showing the scheduling interface, allowing users to set specific times for lights to turn on or off.
6.5 One-Key Scene Patterns
Create and activate custom scene patterns with a single tap in the app. This allows you to control multiple lights or devices simultaneously to match different moods or activities, such as 'Away from home mode', 'Home mode', 'Sleep patterns', or 'Theater mode'.
Image: Visual representation of different scene patterns (Away from home, Home, Sleep, Theater) that can be activated with one key in the Smart Life app.
6.6 Device Sharing
Easily share control of your smart switch with family members through the Smart Life app, allowing everyone to enjoy the benefits of smart home automation.
Image: Illustration of the device sharing feature in the Smart Life app, showing how multiple family members can control the smart switch.
7. Maintenance
To ensure optimal performance and longevity of your smart switch:
- Clean the switch surface regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the switch to excessive moisture or extreme temperatures.
- Periodically check the wiring connections to ensure they are secure.
8. Troubleshooting
- Switch not responding: Check if the circuit breaker is ON. Ensure the switch is properly wired. Try resetting the switch by long-pressing the ON/OFF button for 7-10 seconds until the indicator light blinks rapidly.
- App cannot find the device: Make sure your phone is connected to a 2.4GHz Wi-Fi network. Ensure the switch's indicator light is blinking rapidly (if not, reset it). Check if your Zigbee gateway/hub is properly connected and functioning.
- Voice control not working: Verify that your smart switch is correctly linked to Amazon Alexa or Google Home in the Smart Life app. Check your internet connection and the status of your smart assistant device.
- Lights flicker or don't turn off completely: Ensure the load power of your lamps does not exceed the switch's maximum (LED Lamp: Max 150W, INC Lamp: Max 600W).
9. User Tips
- For optimal performance, ensure your Zigbee gateway/hub is centrally located and within range of all smart switches.
- When setting up, if the indicator light isn't blinking rapidly, a quick reset (long press the ON/OFF button) usually resolves the issue.
- Utilize the scheduling feature to automate daily routines and save energy.
- Experiment with scene patterns to quickly adjust the ambiance of your rooms.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact Milfra customer service. You can also find helpful resources and FAQs within the 'Help Center' section of the Smart Life app.
A user manual in PDF format is available for download: View User Manual (PDF)