Introduction
This manual provides detailed instructions for the ULar Mini Camera Smart Scan, a versatile 2-in-1 device combining a 4K UHD surveillance camera with a wireless Bluetooth speaker. It features WiFi6 connectivity for remote viewing, motion detection alerts, and flexible storage options. Please read this manual thoroughly before operating the device to ensure proper use and optimal performance.
Safety Information
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
Important Safety Instructions:
- Ensure the USB power adapter is plugged into a freely accessible electrical outlet (not hidden behind furniture) for immediate unplugging if needed.
- Do not expose the device to extreme temperatures, humidity, or direct sunlight.
- Keep the device away from water or other liquids.
- Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
- In the U.S., video recording devices with audio recording capabilities are restricted by law. This product has eliminated audio recording to comply with these regulations.
Product Overview
The ULar Mini Camera Smart Scan is a multifunctional integrated device. Below are its key features and components.
Component Highlights
Setup Guide
Follow these steps to set up your ULar Mini Camera Smart Scan.
1. Preparation
- Ensure your router has a 2.4GHz frequency band.
- Your smartphone must be connected to the same WiFi network you intend to add the camera to.
- Keep your smartphone, camera, and router within 3 meters during installation. (You can move the camera further away after installation).
- Have your WiFi network password ready.
2. Powering On the Camera
- Connect the camera to power using the provided USB cable and a power source (e.g., wall charger, power bank, laptop).
- Locate the Power button on the camera's circular body and switch it to the ON position.
- Wait for 40 to 60 seconds. The LED indicator should flash in red and blue.
- If the LED does not flash as expected, please reset the camera (refer to the Troubleshooting section).
3. App Installation
- Search for 'ULar' in the Apple App Store (iOS) or 'CamULar' / 'UEyeLar' in Google Play (Android).
- Download and install the app.
- Open the app and either create a new account by clicking 'New User Registration' or log in with an existing account.
4. Camera Setup via App
- In the app, select the '+' icon to add a new camera.
- Choose 'Smart Scan' from the menu options.
- Follow the on-screen instructions in the app.
- Click the 'Network' button and select your home Wi-Fi from the list (ensure it's a 2.4G Wi-Fi network).
- Enter your correct Wi-Fi password and press 'Next'.
- Position the camera about 15cm (5.9 inches) away from your phone, with the camera lens facing the QR Code displayed on your phone screen.
- Observe the camera's status LED. Once the camera successfully scans the QR code, the LED will flash blue. Then, click 'NEXT' in the app.
- The app will detect and add the camera. You will be prompted to name the camera and set a password.
- Once completed, the camera is added to the app, and you can view the live video feed.
Operating Instructions
Remote Real-Time Viewing
Once the camera is set up and connected to your home WiFi, you can view the live video feed from anywhere using the ULar app on your smartphone or tablet.
Bluetooth Speaker Functionality
The device also functions as a wireless Bluetooth speaker. To use it as a speaker:
- Ensure the device is powered on.
- Activate Bluetooth on your smartphone or other audio device.
- Search for the speaker in your device's Bluetooth settings and pair with it.
- You can now stream music and take calls through the speaker while it simultaneously records video.
Local Recording (without WiFi)
The camera can record continuously to an SD card even without a WiFi connection.
- Insert a formatted SD card (up to 512GB, not included) into the microSD card slot.
- Power on the device. It will automatically begin continuous recording to the SD card.
- Ensure the SD card is formatted prior to local recording to prevent issues.
App Features and Control
The dedicated ULar app provides comprehensive control over your camera.
- Remote Real-Time Viewing: Access live video feed from multiple devices.
- Video Playback: Review recorded footage stored on the SD card or cloud.
- Light Control: Adjust camera settings, including indicator lights.
- WiFi Performance: Monitor and manage network connection.
- MP4 File Download: Download recorded videos directly to your phone.
- Adjustable Sensitivity & Key Zone: Customize motion detection areas and sensitivity.
- Cloud Storage & AI Humanoid Detection: Optional cloud service for enhanced detection and storage.
- RTSP/ONVIF Support: Integration with other surveillance systems.
Storage and Recording
SD Card Recording
The camera supports local recording to an SD card (up to 512GB, not included). It uses H.265 encoding, which efficiently compresses video files, allowing for approximately three times more storage capacity compared to standard encoding.
Intelligent Loop Recording: When the SD card is full, the camera automatically overwrites the oldest video files, ensuring continuous recording without manual cleanup.
Cloud Storage (Optional)
Optional cloud storage is available, offering enhanced features like AI Humanoid Detection to reduce false alerts and secure off-site storage for your recordings.
Motion Detection Alerts
The camera is equipped with motion detection capabilities to alert you to activity in its field of view.
- Alerts & Clips: When motion is detected, the camera sends instant alerts and short video clips to your phone via the app.
- Adjustable Sensitivity: You can customize the sensitivity of the motion detection to minimize false alarms.
- Key Zone Detection: Define specific areas within the camera's view for motion detection, ignoring activity outside these zones.
Specifications
| Feature | Detail |
|---|---|
| High Definition Support | 4K UHD (20fps) |
| Camera Stabilization | None |
| Type | Mini Camera / 2-in-1 Wireless Speaker |
| Lens Angle | 100° Wide Angle |
| Connectivity | WiFi6 (Router & AP Hotspot modes) |
| Local Storage | Up to 512GB SD card (H.265 encoding) |
| Cloud Storage | Optional, with AI Humanoid Detection |
| Recording Features | Continuous recording, Loop recording |
| Audio | Built-in high-sensitivity mic (audio recording disabled for US compliance) |
| Power Supply | USB powered |
| Origin | Mainland China |
| Package Length | 35 cm |
| Package Width | 11 cm |
| Package Height | 8 cm |
| Package Weight | 0.491 kg |
Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place when not in use.
- Software Updates: Regularly check the ULar app for firmware updates to ensure optimal performance and security.
- SD Card Management: Periodically check the health of your SD card. If using loop recording, ensure the card is reliable.
Troubleshooting
This section addresses common issues and their solutions.
LED Indicator Diagnostics
| LED Display | Status | Solution |
|---|---|---|
| No display / Both lights off | Power off | Ensure the camera is connected to power and the Power button is ON. |
| Steady blue and red | Switched on / Camera is reset | This indicates the camera is on and may have just been reset. |
| Flashing blue and red | Camera is emitting its own WiFi (AP mode) | Press the RESET button for 3 seconds to enter this mode. |
| Flashing Blue | Camera is reset to Reserved Mode | Press the RESET button for 3 seconds again to go back to reset mode. |
| Steady Blue | Camera is connected to the router via WiFi | This LED can be switched off in the app. |
| Flashing red | Wrong WiFi password | Reset the camera and try setup again. |
| Steady red | WiFi signal strength weak or WiFi SSID not found | Bring the camera closer to the router. |
| Steady blue light with flashing red | IP address assignment failed | Activate DHCP in router settings and deactivate MAC filtering. |
Resetting the Camera
- Connect the camera to power and ensure the Power button is ON.
- Press and hold the reset button for 3-4 seconds. The LED will start to flash blue quickly.
- Release the reset button and wait a few seconds.
- Wait approximately 40 seconds. The LED should flash blue and red, indicating the camera is reset.
- If the camera was in a reserved status and the LED flashed blue after reset, you may need to perform the reset process again from the beginning.
Note: The exact location of the reset button and SD card slot may vary slightly between models. Refer to your product's physical interface for precise identification.
Router Settings Check (If Setup Fails)
- Power Cycle Router: Disconnect your router from power for about 30 seconds, then reconnect and wait for the online light to stabilize.
- WiFi Encryption: Ensure you are using WPA2-TKIP or WPA2-PSK/AES encryption type.
- Guest Access: If using guest access, deactivate the 'Surf and Mail only' option and ensure 'Devices connected to the guest access are allowed to communicate with each other'.
- WiFi Channels: Check if WiFi channels are occupied. Reconfigure to 'automatic' if necessary.
User Tips
- For optimal video quality, ensure the camera lens is clean and free from obstructions.
- Place the camera in a central location to maximize the 100° wide-angle coverage.
- Regularly check the app for notifications and alerts, especially for motion detection events.
- If experiencing connectivity issues, try restarting both the camera and your router.
- Consider using a high-quality, high-speed SD card for reliable local recording, especially with 4K UHD video.
Warranty and Support
For any issues or questions regarding your ULar Mini Camera Smart Scan, please refer to the following:
- User Manual (PDF): A detailed user manual in PDF format is available. You can access it at: ULar Mini Camera Smart Scan User Manual (PDF).
- Customer Service: Contact the seller's customer service for technical support or warranty claims.
- Data Security: Your data security is prioritized with encrypted audio/video transmission, compliant with EU and US privacy laws.