HORLAT T10PRO MAX

Contents

HORLAT Google TV Projector

Model: T10PRO MAX

User Manual

1. Important Safety Instructions

Thank you for purchasing the HORLAT projector. Please read this manual thoroughly before using and keep it for future reference. Failure to follow these instructions may void the warranty and could result in physical injury, data loss, or damage.

1.1. Set Up

  • Do not install the projector in places without proper ventilation.
  • Do not install the projector in hot, humid, dusty, or smokey places.
  • Do not block the ventilation holes (intake or exhaust).
  • Do not install the projector near temperature and smoke detectors, as it may cause sensor failure.
  • Avoid installing the projector in areas where warm and cool air will blow directly onto it, as this may cause failure due to moisture condensation or large temperature changes.

1.2. Power Supply

  • Power off the device before removing the power supply from the socket.
  • Use the power cord with caution to avoid unduly bending it. Damaged power cords may cause electric shock or fire.
  • Unplug this device during lightning storms or when unused for a long period.
  • Never touch the power cable or connection with wet hands.
  • Unplug the power cord from the outlet after using the projector.

1.3. Repairs

  • Never attempt to repair the projector yourself.
  • No components in the projector can be repaired by customers.
  • Please entrust qualified professional maintenance personnel for repair.

1.4. Caution

  • Do not look directly at the lens, as it may cause severe eye injury.
  • During and after use, the temperature near the air outlet will rise; avoid touching it to prevent burns.
  • Do not place the projector in rooms that are too warm or too cold, as extreme temperatures will shorten the device's lifespan. The optimal working temperature is 5°C-35°C.

2. Packing List

Ensure all items are present in the package:

  • Projector (T10PRO MAX)
  • 360-degree Bracket
  • Lens Cap
  • Remote Control (Batteries not included)
  • Power Cable
  • HDMI Cable
  • AV Cable
  • User Manual
  • Packing Box
Packing List for HORLAT T10PRO MAX Projector
Diagram showing the projector, remote, cables, and accessories included in the package.

3. Product Overview

Familiarize yourself with the projector's components and interfaces.

3.1. Projector Components

  1. Focus Lens
  2. Adjusting Knob (Lifting nut)
  3. IR receiver (Front)
  4. 3.5mm port for audio output
  5. AV port
  6. Speaker
  7. IR receiver (Rear)
  8. Removable dust cover
  9. Switch of Removable Dust Cover
  10. USB port
  11. HDMI 1 port
  12. HDMI 2 port
  13. Power Switch
  14. Focussing ring
Front view of HORLAT T10PRO MAX Projector
Front view of the projector, highlighting the focus lens and IR receiver.
Rear view of HORLAT T10PRO MAX Projector with ports
Rear view of the projector, showing HDMI, USB, and audio ports.
Bottom view of HORLAT T10PRO MAX Projector with adjusting knob
Bottom view of the projector, indicating the adjusting knob (lifting nut).

4. Remote Control

The remote control allows for easy navigation and adjustment of projector settings.

  1. Power Switch
  2. Voice remote control
  3. Menu Button
  4. Confirm Button
  5. Direction Buttons
  6. Back Button
  7. Home Button
  8. Volume+
  9. Volume-
  10. Mute
  11. Signal Source
  12. Setup
  13. Projection Settings
  14. Lens Forward
  15. Lens Backward
  16. Enter with one click (for quick app access)
Remote Control Layout
Diagram of the remote control with labeled buttons.

5. Setup

5.1. Power On

  1. Plug the power cord into an outlet.
  2. Remove the lens cover.
  3. Press the power button on the projector or remote control to turn on the projector.

5.2. Projector Placement

The projector can be installed in various configurations:

  • Front projection ceiling mount
  • Rear projection ceiling mount
  • Front projection table mount
  • Rear projection table mount

Note:

  • During installation, ensure the projector is powered off to avoid electric shock.
  • Maintain a gap of at least 30 cm from walls. Do not cover or block vents to ensure proper ventilation.
  • If mounting on a ceiling with a projector screen, the projector should not be higher than the screen's upper edge to avoid affecting image quality.

Ceiling Installation

  1. Purchase a universal projector ceiling mount.
  2. Remove the four rubber pads on the bottom of the projector to reveal screw holes. Use M4*10mm screws for installation.
Ceiling installation diagram for projector
Diagram illustrating ceiling installation with screw holes.

5.3. Projector Distance & Size

The recommended projection screen size is around 80 inches with a projection distance of approximately 8.92 ft. Ambient darkness will improve the clarity of the projected images.

Aspect Ratio (16:9)
Distance Screen Size (inches)
5.11ft (1.56m)50
8.20ft (2.50m)80
10.26ft (3.13m)100
12.33ft (3.76m)120
15.41ft (4.70m)150
20.5ft (6.27m)200
Projection distance and screen size guide
Visual guide for projection distance and corresponding screen sizes.

6. Operation

6.1. Adjusting the Projected Image (Autofocus)

After adjusting the size and distance, if the image is unclear, press the remote control's F+/F- buttons to adjust until a clear image is obtained.

Laser TOF Autofocus and Keystone Correction demonstration
Demonstration of Laser TOF Non-Sensitive Auto Focus and 1 Second Keystone Correction.

6.2. Auto Obstacle Avoidance (Autofocus)

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. Select 'Automatic Obstacle' in the 'Advanced Settings' column. The projector will refocus and automatically avoid obstacles (the display screen will shrink).
Google TV interface showing settings for auto obstacle avoidance
Google TV interface with settings for auto obstacle avoidance.

6.3. Auto Access Screen (Autofocus)

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. Select 'Automatic screen entry' in the 'Advanced Settings' column. The projector will refocus and adjust the screen size to fit.

Note:

The curtain needs to be selected with a black border for successful automatic entry. When entering automatically, ensure the corners of the curtain are within the projection screen.

6.4. Manual Four-Point Keystone Correction

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. Select 'Image Correction' in the 'Advanced Settings' column. Press the confirmation key to enter manual key correction. Use the remote control direction keys to zoom the screen size, and press the confirmation key to switch to the next corner.

Note:

The projection screen can only be reduced, not enlarged. If the screen cannot be covered, move the projector back. After adjusting, turn off autofocus and auto trapezoid in advanced settings.

6.5. Input Source

A. HDMI Mode

  1. Connect the projector and equipment with an HDMI cable.
  2. Press and hold the 'Source' button on the projector or remote control to enter the input source interface and select HDMI.
  3. Select the HDMI cable connected to the corresponding HDMI1 or HDMI2 port. Press OK to enter, then 'Back' to exit and return to the main interface.

B. AV Mode

  1. Connect the projector and equipment with an AV cable.
  2. Press and hold the 'Source' button on the projector or remote control to enter the input source interface.
  3. Select AV, press OK to enter, then 'Return' to exit and return to the main interface.

C. USB Mode

  1. Connect a USB disk to the projector. The USB disk will be highlighted on the main projection screen interface.
  2. Select the corresponding file type (Movie, Music, Picture, Office Suite) and press OK to enter the file.
Diagram of projector interfaces for USB, Audio, HDMI connections
Diagram showing USB, Audio, and HDMI input/output interfaces.

6.6. Screen Mirroring

  1. Connect both your phone and the projector to the same Wi-Fi network.
  2. For Apple phones: Swipe up to enter the options interface, click the screen mirror icon, select the projector name (e.g., 'TV Stick'), and then click 'Connect'.

  3. For Google phones: Swipe down to enter the options interface, select 'Screen Cast', select the projector name (e.g., 'TV Stick'), and then click 'Connect'.

Dual Wireless Mirroring for Windows, Android, iOS
Demonstration of 5G+2.4G Dual Wireless Mirroring for various devices.

6.7. Bluetooth Connection

To connect the projector to external speakers:

  1. Use the remote control or projector button to enter the projector's settings interface.
  2. Find 'Bluetooth settings' in the settings interface, press OK to enter. Select 'Add accessory'. A list of Bluetooth devices will be displayed.
  3. Select the desired Bluetooth speaker from the device list to connect, then press OK to pair.
  4. After successful connection, the Bluetooth device will show as 'Connected'.

7. Specifications

Feature Specification
Display TechnologyLCD
Light SourceLED
Aspect Ratio16:9/4:3/Auto
FocusTOF Auto Focus/Keystone
Keystone CorrectionManual Correction, Electronic Correction, Auto Correction (±30°)
Projection ModeThrowing, Ceiling, Back Projection, Mirror Image
Speaker5W*2 (Built-in)
Power SupplyAC 110-240V, 50/60Hz
Unit Dimension256.9*219.6*101.5 mm
Unit Net Weight3.2KG
Photo Format SupportedJPG/JPEG/PNG/BMP
Audio Format SupportedMP3/APE/AAC/FLAC/OGG/WAV/WMA/MID/DTS/M4A
Video Format Supported3GP/AVI/FLV/MP4/MPG/VOB/TS/M2TS/RMVB/MKV
Input/Output Ports3.5mm Earphone Out, HDMI (x2), USB (x1), POWER
Ansi Lumens3000
SystemAndroid (Google TV Android 11)
Projected Dimension50-300 inches
Zoomx 1.4 (50% to 100% zoom function)
PortableNo
UseHome Theater Projector
Projection Distance1.5-9m
Contrast Ratio20,001:1-50,000:1
Brightness45000 Lumens
Display Size≤13.5
FunctionVideo Playback, Others
Inbox AdaptorYes
StructureWith a flat panel screen
Light Source Life>100,000 hours
Processor TypeHI3751/GPU Mali-450MP2 (CPU: A53*4)
RAM + ROM2 GB RAM + 8 GB ROM
WiFiDual-band 2.4/5GHz WiFi 6
BluetoothBT 5.4
SupportHDR10, Red and Blue 3D, 4K, 8K decoding, Auto Keystone, Automatic obstacle avoidance, Automatic entry
CertificationCE, FCC, RoHS, UL, WEEE

8. Troubleshooting

Q1. Blurry Image

  • Ensure the projection distance is greater than the minimum projection distance of 1.5 m.
  • Adjust the focus ring.

Q2. The projector image shows no signal

  • Ensure all cables are connected to the projector properly and stably.
  • Check whether the projector input source mode has been selected as the corresponding format (e.g., if connected via HDMI, select the correct HDMI input channel).

Q3. Remote Unresponsive

  • Ensure the remote points directly at the IR receiver.
  • Do not cover the IR receiver.
  • Try a new pair of AAA batteries.

Q4. The projector stops automatically after a period of time

  • Check if the projector's air inlet and outlet are blocked by other objects.
  • Ensure the local mains voltage is not too low, too high, or fluctuating excessively.

9. User Tips

  • Easy Setup: Users report quick and simple setup, often taking less than a minute, with effortless mobile synchronization and wireless connections.
  • Smooth Performance: The Google TV/Android 14 system is noted for its smooth operation, fast boot-up speed, and lack of glitches.
  • Excellent Visuals: Enjoy crisp 4K details, vibrant and accurate colors, and good brightness that allows for viewing even in dim lighting or with curtains open during the day.
  • Smart Features: Take advantage of reliable autofocus, auto keystone correction, auto obstacle avoidance, and voice control for a seamless viewing experience.
  • Flexible Placement: The 360° support and automatic correction features allow for versatile placement options, including tabletop, ceiling, or tripod, adapting to various spaces.
  • Quiet Operation: The projector operates with low noise, ensuring an undisturbed viewing experience.
  • Built-in Speakers: The integrated speakers provide good sound quality, often sufficient without the need for external speakers.
  • Google Ecosystem & Updates: Benefit from the integrated Google TV experience with access to official apps and regular OTA (Over-The-Air) updates for the latest features and security.
  • Dustproof Design: The projector features a dustproof design, contributing to its durability and consistent performance.

10. Warranty and Support

The HORLAT Google TV Projector comes with a 1-year warranty. The advanced LED light source lamp has a lifespan of up to 100,000 hours. The diffuse reflection imaging design is also intended to protect your eyes.

For any issues or support, please refer to the SAV (Service Après-Vente) email provided in the user manual for a quick and effective solution.

An electronic version of the user manual is available for download. You can find the PDF at User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.