1. Introduction
This Smart Switch Module is designed to upgrade traditional household appliances, integrating four control methods: 433MHz RF, WiFi, voice control, and mobile APP. It allows you to transform old lighting, fans, or other home appliances into smart devices that support remote control and voice interaction, enhancing convenience and efficiency in your home.
2. Safety Information and Cautions
- High Voltage Warning: Installation involves high voltage operations. Always cut off the power before installation. It is strongly recommended to have the device installed by a professional electrician to ensure safety.
- Do not operate with power. Turn off the power to operate, and power on after the test is confirmed to be correct.
- When the remote control battery voltage is low, replace the battery in time. Low battery voltage will generally shorten the remote control distance.
- When using wireless electronic products, be careful to avoid metal masks, large electronic devices, electromagnetic fields, and other strong sources of interference to prevent short distances between the remote control and the receiver or failure to work normally.
- Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.
3. Package Contents
Please check the package for the following items:
- Tuya WiFi Smart Switch Module (Model: WHD05-W)
- User Manual (this document)
- Double-sided adhesive tape or screw package (for installation, may vary by package)
4. Specifications
4.1. Controller Module
| Wireless Communication | WiFi (IEEE 802.11 b/g/n 2.4GHz) |
| RF Frequency | 433.92MHz |
| Input Voltage | AC85-240V 50/60Hz |
| Max Load Current | 10A |
| Max Load Power | 1100W |
| Standby Power Consumption | <0.3W |
| Receiving Sensitivity | -108dBM |
| Coding Way | Learning Code |
| Modulation | ASK |
| Working Temperature | -10°C ~ +70°C |
| Dimensions (Body size) | 47.4mm * 41.2mm * 25.7mm |
| Overall Dimensions | 67mm * 41.2mm * 25.7mm |
| State of Assembly | Ready-to-Go |
| Origin | Mainland China |
4.2. Remote Control (if included)
| Working Voltage | DC3.0V |
| Working Frequency | 433MHZ |
| Standby Power Consumption | <1uA |
| Transmitter Power | <10mW |
| Coding Way | EV1527 Learning Code |
| Modulation | ASK |
| Working Temperature | -10°C ~ +70°C |
| Dimensions | 86mm * 86mm * 15mm |
5. Setup Instructions
5.1. Wiring the Controller Module
WARNING: Ensure power is OFF at the circuit breaker before proceeding with any wiring. Improper wiring can cause electric shock or damage to the device. If you are unsure, consult a qualified electrician.
- Connect the controller in series with the circuit of the lamp or appliance you wish to control.
- Connect the live wire (L) to the 'INPUT L' terminal and the neutral wire (N) to the 'INPUT N' terminal.
- Connect the load's live wire to the 'OUTPUT L' terminal and the load's neutral wire to the 'OUTPUT N' terminal.
After connecting the controller, it can be fixed in an appropriate position using the supplied double-sided tape or screw package. The module is designed to be placed behind a switch or inside an appliance.
5.2. Remote Control Battery Installation (if applicable)
- Open the cover of the remote control switch.
- Install a CR2032 button battery into the battery compartment, ensuring correct polarity (positive direction towards the backplane, negative towards the panel).
- Close the cover.
To install the battery for a touch switch, use a flat-blade screwdriver to gently pry open the battery compartment, insert the CR2032 battery with correct polarity, then re-insert the compartment into the switch.
5.3. App Installation and Device Pairing
5.3.1. Download the App
Scan the QR code below or search for "Smart Life" or "Tuya Smart" in your mobile app store (iOS/Android) to download the application.
5.3.2. Add Device via App
Ensure the controller module is powered on after installation.
- Open the Smart Life or Tuya Smart App.
- Tap the "+" icon in the upper right corner to enter the network connection page.
- Select the device type (e.g., "Switch" or "Lighting").
- Choose a network connection method: Normal Mode (default) or AP Mode. For Normal Mode, ensure the device's indicator light is rapidly flashing (2 times per second). If not, press the receiver's button for 5 seconds or power the device on/off three times to enter pairing mode.
- Follow the on-screen instructions to connect to your Wi-Fi network (only 2.4GHz networks are supported).
- Once connected, name your device to complete the setup.
5.4. Pairing Remote Controls (RF)
5.4.1. Code Pairing (Manual)
- Press the controller's pairing key 2 times. The LED indicator will flash, indicating it's in pairing mode.
- Within a short time, press the desired button on the remote control switch 2 times.
- The light/appliance connected to the controller should respond, confirming successful pairing.
5.4.2. Clear Code (Manual)
To clear all paired remote controls from the controller:
- Press the controller's code key 8 times. The LED indicator will flash, indicating that all codes have been cleared successfully.
6. Operating Instructions
6.1. Control Functions
The Smart Switch Module offers versatile control options:
- 433MHz RF Remote Control: Use the dedicated RF remote for local control without a network connection. This is ideal for quick access and situations where Wi-Fi might be unavailable.
- WiFi Remote Control (APP): Control your devices anytime, anywhere using the Smart Life or Tuya Smart app on your smartphone or tablet, provided you have an internet connection. The app displays the real-time status of your devices.
- Voice Control: Integrate with Amazon Alexa or Google Assistant for hands-free operation. Simply use voice commands to turn devices on or off.
- Local Button/APP Control: The module retains the functionality of the original wall switch and also supports direct control via a physical button on the module or within the app interface.
6.2. Timing, Countdown, and Schedule Management
The app allows you to set up various automated schedules for your devices:
- One-time Timer: Set a device to turn on or off at a specific time once.
- Repeating Countdown: Schedule a device to turn off after a set duration, repeating as needed.
- Custom Schedule: Arrange daily or weekly schedules for your devices, such as turning on lights at 7:00 AM on weekdays and closing curtains at 8:00 PM.
- Cycle Timing: Set devices to cycle on/off at regular intervals.
These features help automate your daily routines and enhance home security by simulating presence.
6.3. Power-off Memory Modes
In case of a power outage, the device offers three configurable restart states:
- Last State: The device will resume its state (on or off) prior to the power failure.
- Default Off: The device will remain off after power restoration, preventing accidental activation.
- Default On: The device will turn on automatically after power restoration, suitable for devices that need to be constantly active.
6.4. Family Sharing
The main account has exclusive permissions and can easily share device control with family members. This allows multiple users to control smart devices without needing to set up each device individually. Simply share access through the app, and family members can enjoy the smart home experience together.
6.5. Group Control and Smart Scenes
- Group Control: Organize multiple devices into groups to control them simultaneously within the app.
- Smart Scenes: Create automated scenarios where devices trigger or respond to specific conditions (e.g., turn on lights when a motion sensor detects movement).
7. Maintenance
The Smart Switch Module requires minimal maintenance. Keep the device clean and free from dust. Avoid exposing it to extreme temperatures or humidity. If the device is installed in a location prone to dust, periodically clean the exterior with a soft, dry cloth. No user-serviceable parts are inside.
8. Troubleshooting
8.1. Device Shows "Offline" in App
Problem: The device was successfully added, but the app displays an "offline" status.
Solution:
- The newly added device needs a moment to connect to your router and the internet. If it remains offline for a long time, check the following:
- Indicator Light Status: If the LED flashes once and repeats quickly, it means the device cannot connect to the router. This could be due to an incorrect Wi-Fi password, or the device being too far from the router, resulting in a weak Wi-Fi signal.
- Wi-Fi Band: Ensure your router is a 2.4GHz Wi-Fi router. The device only supports 2.4GHz Wi-Fi, not 5GHz.
- MAC Filtering: Make sure your router's MAC filtering is open to allow new devices to join.
- If the device is "Online" on the app but still shows "Offline" after a minute, close and re-open the app.
8.2. App Cannot Find Device During Pairing
Problem: The app cannot find the device when it's in pairing state.
Solution:
- Turn off and then reconnect your mobile phone's WLAN.
- If possible, power off the device, then power it on again to re-enter the network configuration state, and try reconnecting.
8.3. Device LED is Off or Unresponsive
Problem: When the device is powered on, the LED remains off, or pressing the button does not elicit a response.
Solution:
- Confirm that the wiring is correct. The device will not work if the input and output are connected reversely. If the wiring is correct, the circuit may be damaged. Contact customer support if the issue persists.
8.4. How to Set Indicator Light Flash Speed
To make the indicator light flash quickly:
- Connect the device to the power supply.
- Turn off the power after 10 seconds, then turn it on again.
- Long press the reset button for 5 seconds.
- Confirm that the indicator light flashes quickly.
To make the indicator light flash slowly:
- Follow steps 1-3 above to make it flash quickly.
- Long press the reset button again for 5 seconds until the indicator light flashes slowly.
9. User Tips
No specific user tips were available from reviews or Q&A for this product. However, general tips for smart home devices include:
- Stable Wi-Fi: Ensure your 2.4GHz Wi-Fi network is stable and has good coverage where the switch is installed for optimal performance.
- Router Proximity: For initial setup, it can be helpful to perform the pairing process closer to your Wi-Fi router.
- Regular App Updates: Keep your Smart Life/Tuya Smart app updated to the latest version to benefit from new features and bug fixes.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the IntelliHome Hub Store directly. Keep your purchase receipt as proof of purchase.
A PDF version of the user manual is available for download: Download User Manual (PDF)