LEIMA 17111712669

Contents

LEIMA Car Expansion Tank Cap Radiator Cover

Model: 17111712669

User Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of your LEIMA Car Expansion Tank Cap Radiator Cover. Please read this manual thoroughly before installation and operation. This product is designed to replace your vehicle's original radiator cap, ensuring proper sealing and pressure regulation within the cooling system.

LEIMA Car Expansion Tank Cap Radiator Cover with a BMW car in the background
Figure 1: LEIMA Car Expansion Tank Cap Radiator Cover

2. Safety Information

WARNING: DO NOT OPEN WHEN HOT.

The cooling system operates under pressure and at high temperatures. Opening the radiator cap when the engine is hot can result in serious burns from escaping steam and hot coolant. Always allow the engine to cool completely before attempting to remove the radiator cap.

Close-up of the radiator cap with 'DO NOT OPEN WHEN HOT' warning text
Figure 2: Radiator Cap with Safety Warning

WARNING: SUFFOCATION HAZARD

To avoid danger of suffocation, keep any plastic packaging away from babies and children. Do not use this packaging in cribs, beds, carriages, or playpens. This packaging is not a toy.

3. Specifications

The LEIMA Car Expansion Tank Cap Radiator Cover is manufactured from high-quality materials to ensure durability and reliability. It provides a fantastic sealing effect to prevent dirt from entering your water tank and maintains proper system pressure.

3.1. Product Details

  • Type: Radiator Cap
  • Condition: New, unused, unopened, undamaged
  • Material: High-quality plastic and rubber components
  • Origin: Mainland China

3.2. Dimensions

Diagram showing the dimensions of the radiator cap: overall width 6.3cm, cap diameter 4.6cm, thread base diameter 2.8cm, thread height 2.5cm
Figure 3: Radiator Cap Dimensions
  • Overall Width: Approximately 6.3 cm
  • Cap Diameter: Approximately 4.6 cm
  • Thread Base Diameter: Approximately 2.8 cm
  • Thread Height: Approximately 2.5 cm

3.3. OE/OEM Part Numbers

This radiator cap is an original standard replacement for the following OE/OEM part numbers:

  • 17110152374
  • 17111712492
  • 17111712669
  • 17111742231
  • 17117639022

4. Compatibility

This radiator cap is compatible with a wide range of BMW models. Please verify your vehicle's specific part number against the OE/OEM numbers listed above to ensure proper fitment. A partial list of compatible models includes:

  • 318i Convertible M42 (1991-1995)
  • 318i Convertible M44 (1996-1998)
  • 318i Sedan M42 (1990-1995)
  • 318i Sedan M44 (1996-1998)
  • 318is Coupe M42 (1990-1995)
  • 318is Coupe M44 (1996-1997)
  • 318Ti Compact M42 (1995)
  • 318Ti Compact M44 (1996-1999)
  • 320i Sedan M50 (1993-1995)
  • 320i Sedan M54 (2000-2005)
  • 323Ci Convertible M52 (1999-2000)
  • 323Ci Coupe M52 (1999-2000)
  • 323i Coupe M52 (1997-1999)
  • 323i Convertible M52 (1998-1999)
  • 323i Sedan M52 (1999-2000)
  • 323i Touring M52 (2000)
  • 325Ci Convertible M54 (2001-2006)
  • 325Ci Coupe M54 (2001-2006)
  • 325e Sedan M20 (1985-1988)
  • 325i Convertible M20 (1987-1993)
  • 325i Convertible M50 (1993-1995)
  • 325i Sedan M20 (1987-1991)
  • 325i Sedan M50 (1991-1995)
  • 325i Sedan M54 (2001-2005)
  • 325i Touring M54 (2001-2005)
  • 325is Coupe M50 (1991-1995)
  • 325ix Coupe M20 (1988-1991)
  • 325ix Sedan M20 (1987-1991)
  • 325xi Touring M54 (2001-2005)
  • 328Ci Coupe M52 (1999-2000)
  • 328i Convertible M52 (1996-1999)
  • 328i Sedan M52 (1996-1998)
  • 328i Sedan M52 (1999-2000)
  • 328is Coupe M52 (1996-1999)
  • 330Ci Convertible M54 (2001-2006)
  • 330Ci Coupe M54 (2001-2006)
  • 330i Sedan M54 (2000-2005)
  • 330xi Sedan M54 (2000-2005)
  • 525i Sedan M50 (1991-1995)
  • 525i Sedan M54 (2001-2003)
  • 525i Touring M50 (1992-1995)
  • 525i Touring M54 (2001-2003)
  • 528i Sedan M52 (1996-2000)
  • 528i Touring M52 (1999-2000)
  • 530i Sedan M54 (2001-2003)
  • 530i Sedan M60 (1993-1995)
  • 530i Touring M60 (1993-1995)
  • 535i Sedan M30 (1989-1993)
  • 540i Sedan M60 (1993-1995)
  • 540i Sedan M62 (1996-2003)
  • 540i Touring M62 (1999-2003)
  • 735i M30 (1987-1992)
  • 735IL M30 (1988-1992)
  • 740i M60 (1993-1995)
  • 740i M62 (1996-2001)
  • 740IL M60 (1993-1995)
  • 740IL M62 (1996-2001)
  • 745i N62 (2002-2005)
  • 745Li N62 (2002-2005)
  • 750i N62N (2006-2007)
  • 750iL M70 (1988-1994)
  • 750IL M73 (1995-1998)
  • 750iL M73N (1999-2001)
  • 750Li N62N (2006-2007)
  • 760i N73 (2004-2006)
  • 760Li N73 (2003-2007)
  • 840Ci M62 (1996-1997)
  • 840i M60 (1994-1995)
  • 850Ci M70 (1991-1994)
  • 850Ci M73 (1995-1997)
  • 850CSi S70 (1994-1995)
  • M3 3.2 Convertible S52 (1998-1999)
  • M3 3.2 Sedan S52 (1996-1998)
  • M3 Convertible S54 (2001-2006)
  • M3 Coupe S14 (1987-1991)
  • M3 Coupe S50 (1994-1995)
  • M3 Coupe S52 (1996-1999)
  • M3 Coupe S54 (2001-2006)
  • M5 3.6 Sedan S38 (1990-1993)
  • M5 Sedan S62 (2000-2003)
  • X3 2.5i M54 (2004-2006)
  • X3 3.0i M54 (2004-2006)
  • X3 3.0i N52N (2007)
  • X3 3.0si N52N (2007)
  • X5 3.0i M54 (2000-2006)
  • X5 4.4i M62 (2000-2003)
  • X5 4.6is M62 (2002-2003)
  • X5 4.8is N62 (2004-2006)
  • Z3 1.9 Roadster M44 (1996-1998)
  • Z3 2.5 Roadster M52 (1998-2000)
  • Z3 2.5i Roadster M54 (2001-2002)
  • Z3 2.8 Coupe M52 (1999-2000)
  • Z3 2.8 Roadster M52 (1997-2000)
  • Z3 3.0 Coupe M54 (2000-2002)
  • Z3 3.0i Roadster M54 (2000-2002)
  • Z3 M Coupe S52 (1998-2000)
  • Z3 M Coupe S54 (2001-2002)
  • Z3 M Roadster S52 (1998-2000)
  • Z3 M Roadster S54 (2001-2002)
  • Z4 2.5i Roadster M54 (2002-2006)
  • Z4 3.0i Roadster M54 (2002-2005)
  • Z4 3.0i Roadster N52 (2006-2007)
  • Z4 3.0si Coupe N52 (2006-2007)
  • Z4 3.0si Roadster N52 (2006-2007)
  • Z4 M3.2 Coupe S54 (2006-2007)
  • Z4 M3.2 Roadster S54 (2005-2007)
  • Z8 ALPINA V8 Roadster S62 (2003)
  • Z8 Roadster S62 (1999-2003)

5. Package Contents

The package includes:

  • 1 x Radiator Expansion Tank Cap

6. Setup and Installation

Replacing a radiator cap is generally a straightforward process. However, if you are unsure, it is recommended to consult a professional mechanic or refer to your vehicle's specific service manual.

  1. Ensure Engine is Cold: As per the safety warning, ensure your vehicle's engine is completely cool before proceeding. This can take several hours after driving.
  2. Locate the Radiator Cap: Identify the radiator cap on your vehicle's radiator or expansion tank.
  3. Remove Old Cap: Press down on the old cap and twist it counter-clockwise to remove it. Be cautious of any residual pressure or coolant.
  4. Inspect Sealing Surface: Check the sealing surface of the radiator neck or expansion tank for any debris, corrosion, or damage. Clean if necessary.
  5. Install New Cap: Place the new LEIMA radiator cap onto the radiator neck or expansion tank. Press down and twist clockwise until it clicks or is securely tightened. Ensure the cap is seated properly and forms a tight seal.
  6. Check for Leaks: After installation, monitor the cooling system for any signs of leaks, especially after the engine reaches operating temperature.

For a general overview of the product, you may watch the following video:

Video 1: General company promotional video (not specific installation guide).

7. Operating Instructions

The radiator cap is a passive component of your vehicle's cooling system. Its primary function is to maintain the correct pressure within the system, which raises the boiling point of the coolant and prevents cavitation. Once installed correctly, no further operational input is required from the user during normal driving conditions.

Remember the critical safety instruction: DO NOT OPEN WHEN HOT.

8. Maintenance

Regular inspection of your radiator cap is crucial for maintaining the health of your vehicle's cooling system.

  • Visual Inspection: Periodically check the cap for any signs of cracks, damage, or wear on the rubber seals.
  • Spring Functionality: Ensure the spring mechanism on the underside of the cap moves freely and returns to its original position.
  • Cleanliness: Keep the cap and the radiator neck clean from dirt, debris, or coolant residue that could interfere with a proper seal.
  • Replacement: Radiator caps can lose their pressure-holding ability over time. It is generally recommended to replace the radiator cap every few years or as part of routine cooling system maintenance, even if it appears to be in good condition.

9. Troubleshooting

If you experience issues with your cooling system after replacing the radiator cap, consider the following:

9.1. Engine Overheating

  • Incorrect Cap Pressure: Ensure the new cap has the correct pressure rating for your vehicle. An incorrect rating can lead to overheating or hose damage.
  • Faulty Cap: Even new parts can sometimes be defective. If overheating persists, the cap might not be holding pressure correctly.
  • Other Cooling System Issues: Overheating can be caused by many factors beyond the cap, such as low coolant level, a faulty thermostat, a clogged radiator, or a failing water pump. Diagnose the entire system.

9.2. Coolant Leaks

  • Improper Installation: Ensure the cap is fully seated and tightened.
  • Damaged Radiator Neck: Inspect the sealing surface of the radiator or expansion tank for cracks or deformities that prevent a good seal.
  • Damaged Cap Seal: Check the rubber seals on the cap for tears or hardening.

9.3. Low Coolant Level

  • Cap Not Sealing: A cap that doesn't seal properly can allow coolant to escape as steam, leading to a low coolant level.
  • External Leaks: Check hoses, radiator, and engine for any visible coolant leaks.

10. User Tips

  • Always double-check the OE/OEM part number against your vehicle's original cap or manufacturer specifications to ensure perfect compatibility.
  • When replacing, compare the new cap's appearance and dimensions with the old one to confirm it's the correct replacement.
  • Consider replacing the radiator cap as a preventative measure during major cooling system maintenance, as it's a relatively inexpensive part that plays a critical role.

11. Warranty and Support

For information regarding warranty coverage, returns, or technical support, please contact the seller directly through the platform where the purchase was made. Ensure you have your order details and product information readily available.

For additional product information, you may refer to the official user manual PDF available at: Product User Manual (PDF).

© 2024 LEIMA Car Accessories Store. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.