MOES ME201W/ME201WZ

Contents

MOES Tuya WiFi ZigBee Ultrasonic Liquid Level Sensor Smart Water Tank Monitor User Manual

Model: ME201W / ME201WZ

Brand: MOES

1. Product Overview

The Smart Liquid Level Meter is an integrated sensing device that accurately monitors the height or volume of liquid within tanks, vessels, or other containers in real time. It utilizes a built-in microprocessor to intelligently process, analyze, compensate for, and diagnose raw data. Key information, such as real-time liquid level and alarm status, is displayed directly on the MOES App. This significantly enhances storage and transportation safety while preventing risks of tank overflow or dry-run operation.

This product is available in both WiFi and ZigBee versions. The ZigBee version requires a ZigBee gateway to function. Please confirm your preferred model before purchasing.

MOES Smart Ultrasonic Liquid Level Sensor, showing WiFi and Zigbee compatibility.

MOES Smart Ultrasonic Liquid Level Sensor, showing WiFi and Zigbee compatibility.

Video demonstrating the MOES Smart Ultrasonic Liquid Level Sensor in action, showing real-time level detection and app alerts.

2. Package Contents

  • Liquid level sensor x1
  • Screws x4
  • Gasket x1
  • EU adapter x1
  • Sensor cable x1
  • User Manual x1

3. Important Warnings

Do not disassemble, reassemble, modify, or attempt to repair this product by yourself. This work should be performed by authorized professionals.

4. Technical Specifications

ParameterValue
ModelME201W / ME201WZ
AdaptorAC 110-240V
Sensor Power Supply≤100mA @ 5V DC
Level Range0.1m ~ 5m
Accuracy± 0.02m
Operation Temperature-20°C ~ 70°C
ProtectionIP65
Wireless ProtocolWiFi / ZIGBEE
Frequency Band2.412-2.484GHz
Maximum Radio Transmit Power<+16 dBm
Diagram showing the dimensions of the ME201WZ sensor: 40mm/1.57in height and 80mm/3.15in width.

Dimensions of the sensor: 40mm (1.57in) height and 80mm (3.15in) width.

Image showing the sensor on top of a water tank in the rain, highlighting its IP65 waterproof performance.

The sensor features IP65 waterproof performance, ensuring reliable operation in various weather conditions.

5. Installation

5.1 Pre-Installation Precautions

  • Hold the sensor perpendicular to the liquid surface.
  • Install the sensor away from the water inlet to avoid pseudo-echoes.
  • The sensor installation cannot be close to the bulkhead, as this may cause a strong pseudo-echo.
Diagrams illustrating precautions for sensor installation: perpendicular to liquid, away from water inlet, and not close to bulkhead.

Visual guide for pre-installation precautions.

5.2 Installation Steps

  1. Remove the release paper from the gasket, and attach the gasket to the center of the tank where the hole will be drilled.
  2. Drill a circular hole in the middle of the tank with a diameter of 55mm-80mm.
  3. Place the sensor over the gasket, ensuring it is aligned with the screw holes and unobstructed.
  4. Fasten the sensor with self-tapping screws.
Four-step diagram showing the installation process of the liquid level sensor on a tank.

Step-by-step installation guide.

5.3 Mounting Considerations

There should not be any obstacles in the reflective area of the sensor. If the mounting surface is curved, it is sufficient to fix the sensor with screws to prevent it from being stressed. If data is abnormal, loosen the screws.

Diagram illustrating proper mounting considerations for the sensor, including beam angle, tank types, and avoiding obstructions.

Diagram illustrating proper mounting considerations for the sensor, including beam angle, tank types, and avoiding obstructions.

5.4 Zigbee Version Specifics

For the Zigbee version (ME201WZ), a Zigbee gateway (hub) is required for the sensor to communicate with your WiFi router and the app. This gateway must be purchased separately.

Diagram showing the connection setup for the Zigbee version, requiring a Zigbee gateway, WiFi 2.4GHz router, and smartphone app control.

Connection diagram for the Zigbee version, highlighting the need for a gateway.

5.5 Extended Cable Setup

The sensor comes with an extended 4-meter cable, allowing for flexible long-distance setup, ideal for wide or elevated installations.

Image showing the liquid level sensor connected to a power adapter via an extended 4-meter cable, suitable for long-distance setup.

Extended 4-meter cable for flexible long-distance setup.

6. Operation

6.1 How Your Liquid Level Meter Works

The sensor communicates with your router (max 50m without obstacles) via WiFi or Zigbee. A touch key on the sensor is used for WiFi connection setup. The LED light indicates the WiFi status:

  • WiFi Config: LED light flashes rapidly.
  • WiFi Connected: LED light is on.
  • WiFi Not Connected: LED light flashes slowly.

6.2 App Download and Setup

Download the MOES App from the App Store or Google Play. While Tuya Smart/Smart Life App still works, the MOES App is highly recommended for its enhanced compatibility and customized services.

  1. Download the "MOES" Application.
  2. Register or Log in: Enter the Register/Login interface, tap "Register" to create an account by entering your phone number to get a verification code and setting a password. Choose "Log in" if you already have a MOES account.

Note:

  • If you are connected to a 5G WiFi network, please disconnect it first and connect to a 2.4G WiFi network for device setup.
  • To reset/re-pair the device, press the Touch Key for 5 seconds for WiFi connection.

6.3 Connecting the App to the Device

For Zigbee Edition:

  1. Ensure your MOES App has successfully connected to a Zigbee gateway.
  2. Add the device successfully. You can then edit the device name and enter the device page by clicking "Done".
  3. Click "Done" to enter the device page and enjoy smart life with home automation.

For WiFi Edition:

  1. Ensure your phone is connected to Wi-Fi and Bluetooth.
  2. Open the MOES App, click the "+" in the upper right corner, enter "Add Device". The device will appear in "discovering devices". Click "Add".
  3. Enter your Wi-Fi Password and click "Next", waiting for the connection to complete. Once the device is added successfully, you can edit its name and enter the device page by clicking "Done". Enjoy your smart life with home automation.

6.4 Real-time Monitoring and Alerts

The app provides real-time monitoring of liquid levels. You will receive instant alerts for various liquid level statuses, such as normal, full alarm, and low alarm.

Smartphone app displaying real-time liquid level monitoring, showing 66% liquid level depth of 1.43m.

Smartphone app displaying real-time liquid level monitoring.

Smartphone app showing instant alerts for normal, full, and low liquid levels.

Instant alerts for different liquid level statuses.

6.5 Customizable Water Level Thresholds

You can set upper and lower water level thresholds within the app for smarter overflow and dry-run prevention. The app will provide alerts based on these custom settings.

  • Installation height (A): Set the distance from the sensor to the tank bottom.
  • Liquid maximum depth (B): Maximum height of liquid in the tank.
  • Set Max: Set the maximum threshold for a high-level alarm (based on actual liquid level value C).
  • Set Min: Set the minimum threshold for a low-level alarm.

Example: Installation height, A=4m; Liquid maximum depth, B=3m; Actual liquid level value, C=2m; Set Max=60%, Set Min=20%. Level Status: Full alarm (C/B*100% = 2/3*100% = 67%).

Smartphone app interface for setting customizable water level thresholds (Max, Min, Installation height, Liquid maximum depth) with a tank diagram.

App interface for customizing water level thresholds.

6.6 Smart Linkage

The sensor supports smart linkage with other smart home devices. For example, you can configure an automatic action to turn on a water pump when a low liquid level is detected.

Diagram showing smart linkage with a water pump, automatically turning on when liquid level is low.

Smart linkage example: automatic water pump activation.

6.7 Water Curve & History Records

The app allows you to gain full insight into your tank’s water usage with intuitive curves and detailed history logs, providing a comprehensive overview of liquid level changes over time.

Smartphone app interface showing history records of liquid level changes and a water level curve graph.

App interface showing history records and water level curve.

7. Maintenance

The MOES Smart Ultrasonic Liquid Level Sensor is designed for durability and minimal maintenance. To ensure optimal performance and longevity:

  • Cleaning: Periodically wipe the exterior of the sensor with a soft, damp cloth to remove dust or debris. Avoid using harsh chemicals or abrasive cleaners.
  • Inspection: Regularly check the sensor cable for any signs of wear, damage, or loose connections.
  • Environmental Protection: While the device is IP65 rated for water resistance, avoid submerging it or exposing it to extreme conditions beyond its specified operating temperature range.
  • No User Serviceable Parts: As stated in the warnings, do not attempt to open, disassemble, or repair the device yourself. Unauthorized modifications will void the warranty and may cause damage or malfunction.

8. Troubleshooting

If you encounter problems installing or operating your device, please review the product data sheet for detailed guidance. The full text of the EU declaration of conformity is also available online.

For further assistance, refer to the contact information in the Support & Contact section.

9. User Tips

  • For best accuracy, ensure the sensor is mounted perfectly perpendicular to the liquid surface and away from any inlets or bulkheads that could cause false readings.
  • Regularly check the app for history records to understand your water usage patterns and anticipate potential issues.
  • Utilize the smart linkage feature to automate actions, such as controlling a pump, to maintain desired liquid levels efficiently.
  • If using the Zigbee version, ensure your gateway is always powered on and within range for continuous monitoring.

10. Warranty Information

The products are covered by a 24-month warranty, effective from the date of purchase by a retail customer. To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase), unless the purchase date is specified on the warranty card.

If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and go to the place or store where you purchased it to apply for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee will be charged.

We recommend properly protecting the goods when delivering them for warranty service, preferably using the original packaging with padding to ensure safe transportation. If replacement packaging is used, ensure the product is adequately protected from damage during shipping. We recommend placing a sticker on your packaging indicating the product's susceptibility to impact, such as "Warning Glass."

Reported defects covered by the warranty will be considered immediately and no later than 14 days from the date of delivery of the goods to the Guarantor. After checking and determining the legality of the warranty claim, the Guarantor's services will repair the product within a reasonable time, not exceeding 30 days from the date of delivery of the goods to the Guarantor. However, if hard-to-find spare parts are required, this deadline may be extended.

The warranty does not cover:

  • Mechanical damage caused by the user's fault and product defects caused by such damage.
  • Damage caused by improper use of the product.
  • Maintenance and similar operations specified in the user manual (users are obliged to perform these themselves).
  • Defects due to natural wear and tear during use.

The rights under the guarantee will expire if:

  • The warranty seal is removed from the product.
  • The serial number is removed from the product.
  • Actions are taken to eliminate physical defects in the product outside of authorized service.
  • Non-original parts and consumables are used.

11. Recycling Information

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

WEEE recycling symbolRecycling symbol

12. Support & Contact

For further assistance or inquiries, please use the following contact information:

UK Representative: EVATOST CONSULTING LTD

Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatost.com

EC Representative: AMZLAB GmbH

Address: Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066

Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD

Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After Service Email: service@moeshouse.com

Made In China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.