Nanlite FC-120B/FC-120C

Contents

Nanlite FC Series FC-120B/FC-120C LED COB Video Light User Manual

Models: FC-120B (Bi-color) / FC-120C (RGB Full Color)

1. Introduction

Thank you for purchasing a Nanlite product. The FC-120B/FC-120C is a newly designed LED bi-color/RGB full-color spotlight from Nanlite. It is engineered with high color rendering (CRI average 96, TLCI average 98 for FC-120B; CRI average 95, TLCI average 94 for FC-120C), a wide CCT range of 2700K-6500K (FC-120B) or 2700K-7500K (FC-120C), and 12 adjustable effects in a compact and stylish design.

It supports power via a power adapter, optional battery grip, or PD charger using its DC power socket and Type-C port. Control methods include on-board controls, remote controller, Nanlink App, and DMX/RDM, providing flexibility for various creative needs. Built with an FM mount and umbrella hole, it is compatible with a wide range of FM mount accessories, allowing for diverse lighting effects. The FC Series combines compactness with professional capabilities, enabling you to achieve optimal lighting anytime and anywhere.

2. Safety Notice

  • Please do not look directly at the emitter when the fixture is on.
  • Please keep the fixture on for 10 seconds after making settings before turning it off.
  • Please do not place any object on the fixture or allow liquid to flow inside the fixture.
  • Please do not place the fixture near any flammable or volatile substances like alcohol or gasoline.
  • Please do not use strong detergent for cleaning. Wipe off dirt using a cloth with neutral cleanser.
  • Please set up the fixture in a dry and well-ventilated place. Do not use it in any humid, dusty, or overheated environment. Ensure the fan and vents are unimpeded.
  • Please do not disassemble the fixture to repair at will. Qualified professionals should conduct maintenance strictly following operating procedures.
  • Please do not cover the vents when using, to avoid affecting heat dissipation and resulting in damage. Pay attention to anti-scald when using the fixture for a long time, as the surface temperature can be high.

3. Product Overview

3.1 Product Diagram

Nanlite FC-120C LED light with reflector on a stand, showing various components.
Figure 1: Nanlite FC-120C LED light with reflector on a stand.

The FC-120B/FC-120C features the following components:

  1. Handle
  2. Display Screen (1.9-inch LCD)
  3. Button (for menu navigation and selection)
  4. Left Knob (for adjusting parameters)
  5. DMX In/Out ports
  6. Type-C Port (for power and firmware updates)
  7. DC Power Socket
  8. Umbrella Mount Knob
  9. Bracket Fixing Knob
  10. Right Knob (for adjusting parameters)
  11. Lock Catch (for reflector detachment)
  12. Reflector
  13. Power Switch
  14. Umbrella Mount
  15. Adjustable Handle

3.2 What's in the Box (FC-120B Example)

  • FC-120B x 1
  • Power Adapter x 1
  • RF-FMM-45 Reflector x 1
  • AC Power Cable 4.5M x 1
  • AS-BA-FMM Bowens Adapter x 1
  • User Manual x 1
  • Carry Case x 1
Contents of the Nanlite FC-120B package, including the light, power adapter, cables, reflector, Bowens adapter, user manual, and carry case.
Figure 2: Included items for the FC-120B.

4. Setup

4.1 Installation and Detachment of Reflector

  1. To Install: Align the reflector to the fixture's FM mount. Rotate the reflector in the direction shown on the fixture until it clicks into place.
  2. To Detach: Push and hold the lock catch, then rotate the reflector until it is free to be detached from the fixture.
Diagram showing how to install and detach the reflector from the Nanlite FC series light.
Figure 3: Reflector installation and detachment.

4.2 Installation of Umbrella

  1. Loosen the umbrella mount knob.
  2. Insert the umbrella into the umbrella mount.
  3. Tighten the umbrella mount knob to lock the umbrella.
Diagram showing how to install an umbrella into the Nanlite FC series light's umbrella mount.
Figure 4: Umbrella installation.

5. Operating Instructions

5.1 Power On/Off

Ensure the power switch is off before connecting the power adapter. Connect the fixture with the power adapter via the cable and switch it on. The screen will light up and display "NANLITE".

5.2 Basic Controls

The control panel features two knobs, two buttons, and a 1.9-inch display screen for straightforward operation.

  • MODE Button: Press the MODE button to switch between CCT mode and EFFECT mode.
  • MENU Button: Press the MENU button to enter the interface. The FC-120B/FC-120C menu includes: OUTPUT MODE, ADDRESS/DMX, WIRELESS CONTROL, FAN CONTROL, ROTATE SCREEN, SCREEN BRIGHTNESS, LANGUAGE, FIRMWARE UPDATE, RESET ALL SETTINGS, and VERSION.
Close-up of the Nanlite FC-120C on-board control panel, showing the display screen, knobs, and buttons.
Figure 5: On-board Control Panel.

5.3 Advanced Features

  • Wide CCT Range: The FC-120B/FC-120C offers a CCT range of 2700K-6500K (FC-120B) or 2700K-7500K (FC-120C) to meet diverse shooting needs. It features two output modes: Maximum Output Mode (max brightness for chosen CCT) and Constant Output Mode (consistent brightness across the entire CCT range).
  • High Color Accuracy: The FC-120B/FC-120C performs exceptionally well in photometric tests, exceeding requirements for color accuracy in most shooting scenarios.
  • Quiet Operation: Equipped with an adjustable cooling system with four fan modes (SMART, FULL SPEED, LOW SPEED, and OFF). In SMART mode, the average noise level is only 20dBA, making it suitable for live recording.
  • 12 Special Effects: The FC-120B/FC-120C has 12 built-in special effects, with parameters fully tunable through on-board control and further customization via the Nanlink App. Effects include CCT Loop, Flash, Pulse, Storm, TV, Paparazzi, Candlefire, Bad Bulb, Firework, Explosion, and Welding.
  • Multiple Power Solutions: The lights offer various power options including power adapter, NP-F batteries (FC-60B only), V-mount batteries, and USB-PD protocol power banks/chargers. The Type-C port allows connection to USB power banks or chargers that support the PD protocol, offering flexibility and freedom from power socket distance.
  • FM Mount Ecosystem: The FC-120B/FC-120C adopts the classic FM mount design, featuring a comprehensive accessory ecosystem including Fresnel lens, projection attachment, softbox, and lantern. An included Bowens adapter ensures compatibility with a wide variety of Bowens mount accessories.
Video 1: Nanlite FC Series product demonstration, highlighting features like color, effects, and power options.

6. Specifications

6.1 Technical Data

ParameterFC-120B (Bi-color)FC-120C (RGB Full Color)
Rated Power145W120W
InputDC24V/6.25A Max, AC100-240V 50/60Hz, PD3.1 (15-28V) 30W Min
CCT Range2700K-6500K2700K-7500K
CRIAverage 96Average 95
TLCIAverage 98Average 94
Beam Angle60°
Control MethodsOn-board, Remote Controller, NANLINK App, DMX/RDM
Special EffectsCCT Loop, Flash, Pulse, Storm, TV, Paparazzi, Candlefire, Bad Bulb, Firework, Explosion, Welding
Product SizeLight Fixture: 227 x 123 x 102mm (8.9 x 4.8 x 4.0 inches)
Product Weight980g (2.16 lbs)1000g (2.2 lbs)
CertificationsCE, FCC, RoHS, KC, PSE

6.2 Package Dimensions and Weight

  • Length: 30 cm
  • Width: 20 cm
  • Height: 15 cm
  • Weight: 3.5 kg

7. Maintenance

  • Clean the fixture regularly with a soft cloth and a neutral cleanser. Avoid strong detergents.
  • Store and operate the fixture in a dry, well-ventilated, and dust-free environment.
  • Ensure all ventilation openings are clear and unobstructed to prevent overheating.
  • Allow the fixture to cool down after prolonged use, as the surface can become hot.

8. Troubleshooting

  • Light not turning on: Check power connections, ensure the power adapter is correctly plugged in, and verify the power switch is in the 'on' position.
  • Abnormal operation: Try resetting all settings via the MENU. If issues persist, check for firmware updates.
  • Overheating: Ensure the fan and vents are not blocked. Operate in a well-ventilated area.
  • Control issues: Verify connections for DMX/RDM. For app control, ensure Bluetooth is enabled and the Nanlink App is properly connected.

9. User Tips

  • For optimal color accuracy, especially in critical shooting scenarios, utilize the Constant Output Mode.
  • Experiment with the various special effects to add dynamic elements to your video productions.
  • Take advantage of the Nanlink App for remote control and advanced customization of settings, which can streamline your workflow on set.
  • When using portable power solutions like V-mount batteries or PD power banks, ensure they meet the required power output for full functionality.

10. Warranty and Support

For warranty information and technical support, please refer to the official Nanlite website or contact their customer service. The latest version of this manual and additional resources can be found at www.nanlite.com.

Contact Information:

  • Phone: +86-754-85751187
  • Email: info@nanlite.com
  • Address: Dongil Section, Highway 324, Chenghai, Shantou City, Guangdong Province, China

© 2024 Nanlite. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.