HZTZ Q15

Contents

HZTZ AI Voice Printer User Manual

Model: Q15

1. Introduction

The HZTZ AI Voice Printer is a portable, ink-less thermal printer designed for instant printing through voice commands and app control. It supports speech recognition in multiple languages, making it a versatile tool for office, study, and creative activities. This manual provides detailed instructions to help you get the most out of your device.

AI Voice Printer held in hand, showing its compact size and screen.

Figure 1: Portable AI Voice Printer in hand. Dimensions: 8.8cm (3.46") width, 9.5cm (3.74") height, 8cm (3.15") depth.

2. Product Overview

2.1 Package Contents

  • 1 x Packaging Box
  • 1 x AI Printer (Q15)
  • 1 x USB Cable (Type-C)
  • 1 x User Manual
  • 1 x Roll of Thermal Paper (57mm x 25mm)
Contents of the AI Mini Printer package including the printer, box, USB cable, user manual, and paper roll.

Figure 2: What's included in the box.

2.2 Device Components

  • AI Button: Long press to pick up sound/command.
  • MIC Pickup: For voice input.
  • HD Display: Screen for interface and content preview.
  • Power On/Off Push Button: To turn the device on or off.
  • TYPE-C Charging Port: For charging the device.
  • Printing Outlet: Where printed paper exits.
  • Loudspeaker: For audio feedback.

3. Setup Guide

3.1 Charging the Printer

Before first use, fully charge the printer using the provided Type-C USB cable and a 5V charger. Gently insert and unplug the charging cable to prevent damage to the port. Unplug the cable once charging is complete.

3.2 Loading Thermal Paper

The printer uses 57mm wide thermal paper. Open the paper compartment, insert the roll with the printable side facing the print head, and close the compartment, leaving a small amount of paper protruding from the printing outlet.

3.3 App Download and Installation

  1. Scan the QR code below with your smartphone, or search for "Fun Print" in your device's app store (Google Play Store for Android, Apple App Store for iOS).
  2. Download and install the "Fun Print" application on your phone.
Quick Start Guide showing app download QR code and setup steps.

Figure 3: Quick Start Guide with App QR Code.

3.4 Connecting to the Printer (Wi-Fi)

For initial setup, the device needs to be configured to your Wi-Fi network. Note: 5G Wi-Fi is not currently supported; please use a 2.4GHz Wi-Fi network.

  1. Turn on the AI Voice Printer. The display will show "connecting" and then jump to a QR code page.
  2. Using your mobile phone, scan the QR code displayed on the printer's screen. This will direct you to the network configuration page in the "Fun Print" app.
  3. On the app's configuration page, enter your 2.4GHz Wi-Fi network name (SSID) and password.
  4. Tap the option to "Generate and play sound wave" (or similar).
  5. Hold your mobile phone, which is playing the sound wave, close to the AI Voice Printer for configuration.
  6. Once successfully connected, the printer's display will show "Press to talk". You can now proceed to use voice commands or app controls.

4. Operating Instructions

4.1 Using Voice Commands

Once the printer is connected to Wi-Fi and the screen displays "Press to talk":

  1. Press and hold the AI button (located at the top of the device) for approximately two seconds.
  2. While holding the button, clearly speak your command or request (e.g., "Print a cute kitten head." or "Print an angry cat.").
  3. Release the AI button after speaking your command. The printer will process your request and print the corresponding content.
AI Voice Printer responding to a voice command to print a kitten head.

Figure 4: AI Voice Dialogue Printing in action.

4.2 Using App Control

The "Fun Print" app provides additional functionalities and control over your printer:

  • Photo Printing: Print photos directly from your phone (in black and white).
  • Text Printing: Input text and print it.
  • Font Customization: Select desired font styles.
  • PDF Printing: Print PDF documents.
  • Content Creation: Access various templates and creative tools within the app for learning applications, craft stories, instant art, and holiday gift cards.
AI Voice Printer next to a smartphone showing the Fun Print app interface.

Figure 5: Printer controlled via smartphone app.

4.3 Reset / Unbind Device

To reset the device or unbind it from your network:

  1. Press and hold the AI button.
  2. While holding the button, say: "Please reset the device."
  3. The device will reset its settings and disconnect from the network.

5. Maintenance and Care

5.1 Battery Care and Safety

  • Always use a 5V charger to prevent damage.
  • Do not disassemble, impact, extrude, or expose the battery to fire.
  • If the battery shows severe bulging, discontinue use immediately.
  • Avoid high-temperature environments and do not immerse the battery in water.
  • Replacing the battery with an incorrect type can cause an explosion. Always follow instructions for disposal of used batteries.

5.2 General Precautions

  • Gently insert and unplug the charging cable to avoid damaging the port.
  • Unplug the charging cable promptly after charging.
  • Do not use or charge the device in environments with high temperature, high humidity, excessive smoke, or dust (e.g., bathrooms, steam rooms, near open flames).
  • Improper charging can damage the print head.
  • Avoid touching the print head to prevent overheating and burns.
  • The tearing blade is sharp; handle with care to avoid injury.

6. Troubleshooting

6.1 Connection Issues

  • Printer not connecting to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported. Double-check your Wi-Fi name and password. Ensure your phone is close to the printer during the sound wave configuration process.
  • App not finding printer: Ensure the printer is powered on and in pairing mode (if applicable, after reset). Restart both the printer and the app.

6.2 Printing Issues

  • No print or blank page: Check if thermal paper is loaded correctly with the printable side facing the print head. Ensure the paper compartment is properly closed.
  • Poor print quality: Ensure the thermal paper is suitable and not old or damaged. Clean the print head gently with a soft, lint-free cloth if smudges appear.

6.3 Voice Command Issues

  • Printer not responding to voice: Ensure the printer is connected to Wi-Fi and the screen shows "Press to talk." Speak clearly and hold the AI button for the duration of your command. Ensure there is no excessive background noise.

7. Specifications

FeatureSpecification
Product NameAI Mini Printer (Portable Printer)
ModelQ15
Dimensions94 x 81 x 89 mm (3.74" x 3.15" x 3.46")
Weight280g
Battery Capacity1200mAh 3.7V Li-battery
Display3.5" HD screen (2.8" HD screen optional)
Charging InterfaceType-C
Print Resolution200dpi
Printing ModeThermal/Ink-less Printing
Paper SupportThermal paper, Sticky paper, Dual-colored paper
Max Paper Size58mm width
Printer Paper Included57mm x 25mm roll
Wireless ConnectivityWi-Fi (2.4GHz only)
MaterialsABS Plastic
VoltageBelow 50V AC / 75V DC
Battery IncludedYes

8. User Tips

  • Language Recognition: The AI Voice Printer has shown good recognition capabilities for various languages, including Korean.
  • App Features: Explore the "Fun Print" app for advanced features like printing photos (black and white), customizing fonts, and printing PDF documents directly from your smartphone.
  • Screen Type: Note that the device features a color monitor, but it is not a touchscreen. All interactions are done via physical buttons or the connected smartphone app.
  • Creative Uses: Utilize the printer for various creative and practical tasks, from creating learning materials and craft projects to instant art and personalized gift cards.

9. Warranty and Support

For any warranty claims, technical support, or inquiries not covered in this manual, please contact your seller or the point of purchase. Keep your proof of purchase for warranty services.

9.1 Regulatory Compliance (FCC/IC)

This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

© 2024 HZTZ. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.