1. Introduction
The ATOPCARE FIREFLY Q8L is a high-performance 4K waterproof shooting and recording camera designed for outdoor activities, including hunting. It features Electronic Image Stabilization (EIS 4.1), 5G WiFi, Bluetooth remote control capabilities, and a unique crosshair/red dot function for enhanced targeting in videos. This manual provides detailed instructions for setting up, operating, and maintaining your FIREFLY Q8L camera.

2. Safety Information
- Do not expose the camera to extreme temperatures outside its operating range (-20°C to 40°C).
- Ensure the waterproof rubber plug is securely closed before exposing the camera to water to maintain its IP67 rating.
- Use only recommended charging adapters (above 2A) to prevent damage and ensure efficient charging.
- Keep the camera and its accessories out of reach of children.
3. Package Contents
Please check the package for the following items:

- FIREFLY Q8L Camera
- Package Cover
- 64GB TF Card
- USB-C Cable
- Screw
- Electronic User Manual
- .410 Gauge Gasket
- 28 Gauge Gasket
- 20 Gauge Gasket
- 12 Gauge Bracket
4. Product Overview
4.1. Camera Components

- Power button
- Mode button
- Status LED
- Microphone pickup hole
- Camera stand (Compatible with barrel diameters of 12-26mm)
- Waterproof rubber plug (including TF card slot/USB-C socket and reset hole)
- Camera forward marking slot
- Camera lens position
4.2. Button Description
| Name | Function | Description |
|---|---|---|
| Power button | Power on/off video recording | Short press to turn on, long press 2S to turn off; Short press to record/stop recording. |
| Mode button | Mode selection | Short press to switch between recording/slow motion/photo modes. Press and hold for 3S to turn on/off WIFI. |
| Reset key | System reset | When the camera malfunctions, it can be powered off to repair the problem. |
4.3. LED Description
| Name | Function | Description |
|---|---|---|
| Red LED | Indicating charging | The red LED is on while charging, turns off when fully charged. |
| Green LED | Recording mode | The green LED flashes when recording, and flashes briefly when taking photos. |
| Blue LED | Photo mode | The photo mode is constantly on. When turning on WIFI, it flashes. |
| G/B LED | Slow motion mode | G/B LED flash simultaneously during slow motion recording. |
| G/B LED | Power Saving Mode | Green and blue lights alternate and flash slowly. |
| Special G LED | Low battery warning | When the battery is lower than the startup voltage, the camera can't be turned on and the G LED flashes for 3s as a prompt. |
4.4. Vibration Description
| Name | Function | Description |
|---|---|---|
| Vibration after startup | Indicate battery level | When battery level is above 75%-100%, vibrates 4 times. 50%-75%, vibrates 3 times. 25%-50%, vibrates 2 times. 1%-25%, vibrates once. |
| Shutdown | Normal shutdown | Shutdown after 2s of vibration. |
| Low Battery | Low power automatic shutdown | Vibration lasts for 5 seconds when low power is detected, then automatically shuts down after 30 seconds. |
| Key operation | Feedback | Vibration once during key operation for feedback. |
5. Specifications
| Feature | Detail |
|---|---|
| Brand Name | ATOPCARE |
| Model Number | Q8L |
| Photo Resolution | 8M |
| Video Resolution | 4K@30FPS / 2.5K@60FPS / 1080P@120FPS |
| TF Card Requirements | U3 |
| Max Support for TF Cards | 512GB |
| Size | 100 × 32 × 32 MM |
| Weight | 108g |
| Battery Capacity | Built-in 2200mAh |
| Working Hours | 3h+ @4K (laboratory data) |
| Charging Time | 3h |
| Compressed Format | H.264/H.265 |
| Video/Photo File Format | *.MP4 / *.JPG |
| Protection Level | IP67 (Waterproof) |
| Operation Tips | Vibration / LED |
| Lens | 12.5mm telephoto 4K lens |
| Aperture | F/2.35, 6G |
| Angle of View | H=28.5°, V=35.7° |
| Working Voltage | 5V |
| Working Current | 400mA@4K30FPS |
| Charging Current | 1000mA |
| Leakage Current | 45uA |
| Connectivity | Bluetooth 5.0, WIFI 5G/2.4G Hz (10m distance) |
| Chipset | Sony Novatek |
| EIS | Gyro V4.1 algorithm, anti-shake image |
| Temperature Resistance | -20°C to 40°C |


6. Setup
6.1. Mounting the Camera
The FIREFLY Q8L comes with a mounting bracket compatible with various shotgun sizes. Ensure the bracket is securely attached to your equipment.



The mount bracket is compatible with shotgun sizes .410, 28, 20, and 12 gauge (10-26mm). The basic plastic guide rail bracket adapts to universal tracks and is high temperature resistant (200°C).

6.2. TF Card Installation
Locate the waterproof rubber plug (6) on the camera. Open it to reveal the TF card slot. Insert a U3 speed class TF card (up to 512GB) into the slot. It is recommended to format a new TF card on the camera itself after installation.
6.3. Charging the Camera
Use the provided USB-C cable to connect the camera to a phone charger or computer. For faster charging, use a charger with an output above 2A. The red LED will be on during charging and will turn off once fully charged. It is recommended to charge the camera after turning it off.
7. Operating Instructions
7.1. Power On/Off
- Power On: Short press the Power button.
- Power Off: Long press the Power button for 2 seconds.
7.2. Recording and Photo Modes
- Start/Stop Recording: Short press the Power button while the camera is on.
- Switch Modes: Short press the Mode button to cycle between recording, slow motion, and photo modes.
7.3. Shooting-Triggered Recording Function
When the camera is turned on and detects shooting vibrations, it will automatically trigger and save videos. The camera records 5 seconds before and 10 seconds after the shooting event. Note: Pre-shooting videos cannot be saved when connected to the app.
7.4. Power Saving Mode
If no shooting vibration is detected within 20 seconds of being turned on, the camera will automatically enter power-saving mode. The green and blue LEDs will alternate and flash slowly. When the gun barrel is lifted, the camera will exit power-saving mode and enter pre-recording mode, awaiting a shooting trigger.
7.5. External Remote Pressure Switch Trigger Recording
Two contacts are reserved on the USB port for connecting an external remote pressure switch to control video recording. If pairing fails, restart the camera and try pairing again. (Requires an additional Firefly remote pressure switch, sold separately).
7.6. Bluetooth Remote Control Triggering
After powering on the camera, it will search for the Bluetooth (BT) remote. Press the button on the BT remote control to pair. Once successfully paired, you can use the BT remote to record videos and take photos. (Requires an additional Firefly Bluetooth remote control, sold separately).
7.7. USB Connection Instructions
- U Disk Mode: When the camera is off and connected to a computer via USB, it will automatically turn on and enter U disk mode. You can then copy videos/photos from the camera to your computer.
- PC CAM Mode: When the camera is on and connected to a computer via USB, it will enter PC CAM mode, allowing it to be used as a 4K webcam for your computer.
7.8. APP Usage Instructions
The FIREFLY Q8L supports remote control and live view via a mobile application.

7.8.1. APP Download
- Google Play Store: Search for "Viipulse"
- APP Store (iOS): Search for "Viipulse"
7.8.2. APP Connection
- Turn on the camera.
- Long press the Mode button for 2 seconds to turn on the camera's WiFi.
- On your phone/tablet, search for the WiFi hotspot named "Firefly_Q8_5G_xxxxxxxxxxxx" (where 'x' is a random number or letter unique to your camera).
- Connect to this WiFi network. The default password is 12345678.
- Once connected, open the Viipulse APP.
7.8.3. APP Interface Overview
Upon opening the APP, you will see the home page. Click "Enter Camera" to access the APP preview interface, where you can view the camera's image in real-time to adjust the shooting angle.
On the home page, a "Disconnect" button is available. Tapping it will exit the APP and turn off the camera's WiFi, saving power. In the preview interface, you can navigate:
- Upper left corner icon: Return to the main page.
- Upper right corner icon: Enter menu settings.
- Lower left corner icon: Enter the playback screen to view recorded videos or photos.
There are three camera modes at the bottom of the screen; swipe to select your desired mode.
7.8.4. APP Menu Options (Android Order)
- Recording sound: Toggle recording sound on/off.
- Video resolution: Select from 4k30fps, 2.5k60fps, 2.5k30fps, 1080p60fps, 1080p30fps, 1080p120fps.
- Loop Recording Duration: Set segmented video length (1 min / 3 min / 5 min / 10 min).
- Light Source Frequency: Adjust to avoid light flickering indoors.
- Video Encoding Format: Choose H.264 or H.265.
- WDR (Wide Dynamic Range): Improves video tolerance. Recommended for cloudy days; may cause overexposure on sunny days.
- LOGO Watermark: Optional close/Red dot/cross/LOGO. Useful for shooting games.
- LOGO coordinates X/Y: Adjust position of red dots or crosshairs (adjustable range is 90% of camera image).
- Mirroring: Flips the image 180 degrees.
- Auto Power Off: Default Off. Camera shuts down after 5 minutes of inactivity to save power.
- Preliminary Record: Camera starts recording and saves to memory after booting up. (Invalid in app connection or slow motion mode).
- FOV (Field of View): 8 different sizes. (Effective only in video mode with anti-shake off).
- Recording volume: Select 0% to 100%.
- ISO: Auto/100/200/400/800/1600/3200.
- White Balance: Auto/sunny/cloudy/incandescent/fluorescent/underwater mode.
- Video quality: High/medium/low. Higher bitrates preserve detail but use more storage. Max bitrate is 40Mbps.
- Time Stamp: Displays time and date in video when enabled.
- Exposure compensation: Adjustment range ±2.0. Low values avoid overexposure but darken image; high values brighten but may lose detail.
- Anti-Shaking: Default on. Optimized algorithm for dark environments. Turn off for fixed shooting scenes to improve picture quality.
- Metering Method: Average, center-weighted, spot metering. Adjust based on shooting requirements.
- Status lights: Default on. LEDs turn off when disabled.
- Shock: Default on. Vibration motor turns off when disabled.
- 5G WI-FI: Default off. When enabled, WiFi runs on 5G frequency for faster download speeds. (Compatible with older devices).
- Gyro Data: When enabled, generates gyro data for algorithm stabilization with Gyroflow.
- Trigger sensitivity: 5 options, can be turned off. Higher sensitivity triggers easier but is prone to false triggers.
- Wake up sensitivity: 5 options. Higher sensitivity wakes up easier but consumes more power.
- Sleep mode: Light sleep/deep sleep/off. Light sleep (0.4s wake-up) is energy-saving; deep sleep (2s wake-up) is most energy-efficient. Camera won't sleep if off.
- WIFI name: Manually change WiFi name.
- WIFI password: Manually change WiFi password.
- Firmware version: Displays current firmware version.
- Format SD card: Formats the TF card. Suggestion: Format new TF cards on the machine.
- Factory Reset: Restores camera parameters to factory settings. Suggestion: If problems occur, try factory reset then restart.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera body. For the lens, use a specialized lens cleaning cloth and solution.
- Waterproof Seal: Regularly inspect the waterproof rubber plug for any signs of wear or damage. Ensure it is always properly sealed when using the camera in wet conditions to maintain its IP67 rating.
- Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
9. Troubleshooting
- Video quality is not good: Restore default settings in the APP menu.
- Video is not smooth:
- Set the frame rate to 2.5K60FPS.
- Ensure Anti-shake is enabled.
- Screen is too exposed:
- Turn off WDR.
- Manually turn down the EV (Exposure Value).
- Charging time is too long: When charging, long press the power button to shut down the camera and then charge.
- Image and audio are not synchronized during playback:
- Copy the video file to your computer and play it there.
- Try using a different media player.
- Cannot record:
- Ensure the TF card speed class is U3 or higher.
- Format the TF card on the camera's menu.
10. User Tips
- For optimal video quality, especially in dynamic scenes, ensure Anti-Shaking is enabled.
- If experiencing overexposure in bright conditions, consider disabling WDR or adjusting exposure compensation.
- Regularly format your TF card through the camera's menu to maintain optimal recording performance and prevent data corruption.
- When using the camera as a PC CAM, ensure the camera is powered on before connecting to the computer via USB.
11. Warranty and Support
For more information, technical support, or warranty inquiries, please visit the official website or contact customer service:
- Website: www.hawkeyefpv.com.cn
- E-mail: vikin@hawkeyefpv.com.cn