RACBOX Hella 5 3R G5 Retrofit Projector Lens

Contents

RACBOX 3.0 Inch Bi-xenon Projector Lens User Manual

Model: Hella 5 3R G5 Retrofit Projector Lens

Brand: RACBOX

1. Introduction

This manual provides essential information for the safe and effective use of your 3.0 Inch Car Headlight HID Bi-xenon Projector Lens. This product is an auxiliary accessory designed for automotive lighting, intended for the normal replacement and upgrade of original car lights. It is not for illegal modification or use. The product meets relevant national automotive lighting industry standards and has undergone strict quality testing.

Front and side view of the 3.0 inch bi-xenon projector lens
Figure 1: Front and side view of the 3.0 inch bi-xenon projector lens.
Side profile of the projector lens showing its internal components
Figure 2: Side profile of the projector lens, highlighting internal components.

2. Safety & Warnings

Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Specifications

Attribute Detail
Product Type Projector Lens
Model Name 3.0 Inch Car Headlight HID Bi-xenon Projector Lens Bulb For Hella 5
Item Type Lens
Projector Lens Dimensions 3.0 Inch
Lens Material Glass
Projector Material Metal
Cover Material Plastic
Cut-off Beam Options LHD (Left-Hand-Drive), RHD (Right-Hand-Drive)
Compatibility Fits for D1S, D2S, D3S, D4S Headlight / Finger Bulbs
Origin Mainland China
Product dimensions diagram for the 3.0 inch bi-xenon projector lens
Figure 3: Product dimensions. The lens measures approximately 70mm (2.7in) in diameter and 74mm (2.9in) in height. The base is 80mm (3in) wide. The mounting plate is 102mm (4in) wide and 80mm (3in) high, with a central opening of 47mm (1.9in) and mounting holes 82mm (3.2in) apart.
Dimensions of the bulb adapter
Figure 4: Bulb adapter dimensions. The adapter is 65mm (2.5in) wide and 52mm (2in) in diameter, with a thickness of 15mm (0.6in).
Close-up of the projector lens showing lens material and motor
Figure 5: Lens material and motor detail. The lens is made of full metal material for durability. It uses a high-quality anti-seize motor for strong power and long lifespan, accurately controlling the projector.
Bi-xenon projector lens mechanism detail
Figure 6: Bi-xenon projector lens design, capable of changing between high and low beam.

4. Package Contents

The package includes:

  • 1 or 2 pieces of 3.0 inch Bi-xenon projector lens (depending on order)
  • Adapters for D1S, D2S, D3S, D4S bulbs
  • Installation fasteners
Multiple projector lenses and bulb adapters
Figure 7: Contents of the package, showing projector lenses and bulb adapters.
Close-up of a bulb adapter
Figure 8: A single bulb adapter, designed for secure bulb fitment.

5. Setup and Installation

Follow these steps for proper installation:

  1. Turn off the vehicle engine and disconnect the power supply to avoid short circuit.
  2. Locate the mounting position of the original projector lens or accessories.
  3. Remove the fixing screws or clips that hold the stock projector lens assembly or accessories.
  4. Unplug the power connector and take off the original projector lens or accessories.
  5. Install the new projector lens or accessories into the mounting position.
  6. Secure the light assembly with screws or clips to ensure stable installation.
  7. Connect the power plug correctly.
Diagram showing steps for replacing a headlight bulb with the projector lens
Figure 9: Installation steps for the projector lens and bulb. The projector can use D1/D2/D3/D4 bulbs, which are easy to replace. The image shows how to attach the bulb adapter and insert the bulb into the projector lens.
Projector lens with bulb adapter attached
Figure 10: Projector lens with the bulb adapter securely attached.
Projector lens with wiring for connection
Figure 11: Projector lens showing the power wires for connection to the vehicle's electrical system.

6. Operating Instructions

This bi-xenon projector lens offers both high beam and low beam functions, providing a clear cut-off line to prevent blinding oncoming drivers.

  • Test all light functions to ensure normal operation after installation.
  • The bi-xenon mechanism allows for switching between high and low beams as needed.
Comparison of low beam and high beam patterns
Figure 12: Beam patterns. The low beam is wide and clear, while the high beam is wide and focused.
Diagram illustrating high beam and low beam light paths within the projector
Figure 13: High beam and low beam light path diagram. The metal reflective cup uses an optimal optical design with superb surface finish for good light refraction. The lens is made of high clear glass for a bright and clear light beam.

7. Maintenance

  • Periodically recheck all screws and connections to ensure they are firm and reliable.
  • Keep the lens surface clean from dirt and debris to maintain optimal light output. Use a soft, lint-free cloth for cleaning.
  • Avoid using harsh chemicals or abrasive materials on the lens or housing.
  • If any part appears damaged, do not use the product and consider replacement.

8. Troubleshooting

  • Light does not work after connection: If the light does not work, reverse the power plug polarity and retest.
  • Unstable light output: Ensure all connections are secure and the light assembly is firmly installed.
  • Poor beam pattern: Verify that the projector lens is correctly seated and aligned. Check for any obstructions or damage to the lens.

9. User Tips

  • Compatibility Check: Before purchasing or installing, always verify the compatibility of the projector lens with your specific vehicle model and existing headlight system (e.g., 2012 VW Passat B7). Ensure it supports the required bulb types (D1S, D2S, D3S, D4S).
  • Professional Installation: While installation is designed to be straightforward, if you are unsure about any steps, it is recommended to seek professional assistance to ensure correct wiring and alignment.

10. Warranty and Support

For detailed product information, including a user manual in PDF format, please refer to the official documentation. A PDF user manual is available for download: User Manual (PDF).

Manufacturer Information:

  • Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No.1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com

EU Authorized Representative:

  • APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD,CORK,T23 AT2P, IRELAND, info@apex-ce.com

For further assistance, please contact your retailer or the manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.