Planck 48 QMK Support VIAL Wired Keyboard User Manual

1. Product Information

Product Name: Planck 48 Full 1u Orthogonal Inline Keyboard
Model: Planck 48

The Planck 48 is a compact, orthogonal, hot-swappable mechanical keyboard designed for customization via QMK and VIAL software. It features a 68-key layout and PBT dye-sublimation keycaps.

2. Safety & Warnings

• ATTENTION: Not suitable for children under three years. This product contains small parts that may pose a choking hazard.
• Keep the keyboard away from liquids, crumbs, and metal objects to prevent short circuits or key jams.
• Avoid pressing keys with excessive force to prevent damaging the hot-swappable sockets.
• Do not use the keyboard or cables if they appear damaged.

3. Setup Guide

3.1. Package Contents

Ensure all components are present:

• Planck 48 Keyboard PCB
• USB-C Cable
• 3.5mm Audio Cable (for split keyboard halves, if applicable)
• Switches (if included in kit)
• Keycaps (if included in kit)

3.2. Before First Use (Kit Assembly)

If you have a kit version, follow these steps to assemble your keyboard:

1. Install Switches: Carefully align each mechanical switch with the hot-swappable sockets on the PCB and press firmly until it clicks into place. Ensure the pins are straight to avoid bending.
2. Install Keycaps: Once all switches are installed, place the corresponding keycaps onto each switch stem.
3. Connect Halves (if split): If your keyboard consists of two separate halves, connect them using the provided 3.5mm audio cable.
4. Connect to Computer: Plug the USB-C cable into the keyboard and the other end into an available USB port on your computer.

3.3. Software Installation

1. Read Configuration Guide: Refer to the QMK/VIAL configuration guide to understand key customization methods.
2. Install Drivers & Software: Download and install any required drivers and the VIAL/QMK configuration software on your computer.

4. Operating Instructions

4.1. Basic Operation

1. Position Keyboard: If using a split keyboard, position the left and right halves comfortably to match your hand posture.
2. Power On: The keyboard will power on automatically when connected via USB.
3. Typing: Begin typing as you would with any standard keyboard.

4.2. Customization with VIAL Software

1. Launch VIAL: Open the VIAL software on your computer.
2. Remap Keys: Use the software interface to remap keys to your desired functions.
3. Set Layers: Configure different key layers for various modes or applications.
4. Program Macros: Create and assign macros for complex command sequences.

5. Maintenance

5.1. Cleaning

• Wipe dust and debris from the keycaps and keyboard surface with a soft, dry cloth.
• For deeper cleaning, keycaps can be carefully removed and cleaned with mild soap and water, then thoroughly dried before reattaching.

5.2. Storage

• Store the keyboard in a cool, dry place when not in use.
• Avoid bending or pulling the 3.5mm audio cable or USB-C cable excessively.
• Cover the keyboard with a dust cover if not in use for an extended period to prevent dust accumulation.

5.3. Inspection

• Regularly check the hot-swappable sockets and cable connections for stable performance.
• Ensure all keycaps are securely seated.

6. Troubleshooting

• Keyboard Unresponsive: If the keyboard is not responding, first recheck all cable connections (USB-C and 3.5mm audio cable if split). Then, try restarting the VIAL software and/or your computer.
• Keys Not Registering: Ensure switches are fully seated in their hot-swap sockets. If a specific key is not working, try swapping its switch with a known working switch to diagnose if the issue is with the switch or the socket.
• Customization Issues: Ensure you have the correct version of VIAL/QMK software and that your keyboard's firmware is compatible. Consult the QMK/VIAL documentation for advanced troubleshooting.

7. Specifications

8. User Tips

• Experiment with different key layouts in VIAL to find what works best for your workflow.
• Utilize key layers to access more functions without needing a larger keyboard.
• Keep your firmware updated to benefit from the latest features and bug fixes from the QMK/VIAL community.

9. Manufacturer & Support Information

Manufacturer

Company Name: Chongqing mian yun gu kua Jing Dian Shang co., ltd
Full Address: BW161 Cross-border Yuncang, Floor 2, Lianda jingmi Building B, No.46 Jincheng Road, Fenggang Town, Dongguan City, Guangdong Province
Email/Website/Telephone: 173560016@qq.com / 86-19112297030

EU Authorized Representative

Company Name: MJCM SARL
Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR
Email: mjcm190928@gmail.com

For technical support or warranty inquiries, please contact the manufacturer directly using the provided contact information.