1. Product Overview
The SONGGER H14W Stainless Steel Swing Check Valve is a threaded, horizontal non-return valve designed for water systems. It automatically prevents reverse flow in pipelines by means of a swing-type disc mechanism. The valve body is manufactured from SS304 stainless steel, providing corrosion resistance and long service life in residential, commercial, and industrial water applications.

Figure 1: H14W Stainless Steel Check Valve with available sizes and key specifications.
2. Specifications
| Parameter | Specification |
|---|---|
| Product Name | Stainless Steel Horizontal Swing Check Valve |
| Material | SS304 Stainless Steel |
| Structure | Swing-type check valve |
| Connection Type | Female Threaded connection (NPT) |
| Thread Sizes | DN8 (1/4"), DN10 (3/8"), DN15 (1/2"), DN20 (3/4"), DN25 (1"), DN32 (1-1/4"), DN40 (1-1/2"), DN50 (2") |
| Pressure Rating | 1.6 MPa (Normal pressure) |
| Maximum Working Temperature | 200°C (Room temperature) |
| Applicable Medium | Water |
| Installation Orientation | Horizontal pipeline only |
| Package Contents | Swing check valve ×1 |

Figure 2: Detailed product specifications and core features.
3. Setup and Installation
3.1 Preparation
- Ensure the selected valve size matches the pipeline thread specification.
- Confirm that the system pressure does not exceed 1.6 MPa and the medium temperature does not exceed 200°C.
- Inspect the valve for visible damage before installation.
- Clean the pipe threads and remove any debris or sealing residue.
3.2 Installation
- Install the valve on a horizontal pipeline only.
- Ensure that the flow direction arrow marked on the valve body aligns with the actual flow direction of the system.
- Apply appropriate thread sealant or PTFE tape to the male pipe threads.
- Tighten securely using suitable tools without applying excessive torque to avoid thread damage.

Figure 3: Precision threads and internal view of the valve.

Figure 4: Illustration of the swing-type and horizontal design for proper installation.
4. Operation
Once installed, gradually introduce fluid into the system. The internal swing disc will open automatically under forward flow and close when flow stops or reverses, preventing backflow. No manual operation is required.
Video 1: Overview of the manufacturing process and applications of SONGGER products.
5. Maintenance
5.1 Inspection
- Periodically check for leakage at threaded connections.
- Ensure the valve operates without abnormal noise or vibration during service.
5.2 Storage and Cleaning
- Store in a dry, well-ventilated environment away from corrosive substances.
- Avoid impact or mechanical damage during transport and storage.
- For long-term storage, keep protective caps on threaded ends.
- Periodically inspect the internal disc and sealing surfaces if the system is disassembled.
- Clean with a soft cloth and non-corrosive cleaning agents only.
6. Troubleshooting
- Leakage at connections: Ensure proper thread sealant (PTFE tape) was applied and connections are tightened securely without over-torquing. Inspect threads for damage.
- No flow or reduced flow: Check for obstructions within the pipeline or valve. Ensure the valve is installed with the correct flow direction.
- Backflow occurring: Verify the valve is installed horizontally and the swing disc mechanism is free to move. Check for debris preventing the disc from closing fully.
- Abnormal noise/vibration: This could indicate an issue with the swing disc or an obstruction. Inspect the valve and surrounding pipeline.
7. Safety Precautions
7.1 General Safety
- Use only within the specified pressure (1.6 MPa) and temperature (200°C) limits.
- This valve is designed for water applications; compatibility with other media must be verified.
- Install strictly in horizontal orientation to ensure proper disc movement.
- Do not use in systems containing solid particles that may obstruct the swing mechanism unless proper filtration is installed.
- Ensure correct thread matching to avoid leakage or mechanical failure.
7.2 Warning Information (EU Market Reference)
WARNING!
- This product is intended for use in pressurized piping systems. Improper installation may result in leakage, property damage, or personal injury.
- Do not exceed the maximum rated pressure of 1.6 MPa or temperature of 200°C.
- Depressurize the pipeline completely before installation, removal, or maintenance.
- Installation must be performed by qualified personnel in accordance with local plumbing and pressure equipment regulations.
- Keep out of reach of children.
- Proper disposal: Follow WEEE directives for electronic waste if applicable to packaging or associated components. Metal components should be recycled according to local regulations.
Note: The above warning information is for reference only. Final warning language must comply with the official language requirements of the destination EU country.
8. User Tips
- Always double-check the flow direction arrow on the valve body before installation to ensure correct orientation.
- For optimal performance and longevity, consider installing a filter upstream if the water source contains particulates.
- While the valve is robust, avoid excessive force during tightening to prevent thread damage.
9. Support
For technical consultations or bulk orders, please feel free to contact us:
- WhatsApp: +86 13311678550
- Email: miazhao008@gmail.com

Figure 5: Contact details for support and inquiries.
A PDF version of this user manual is available for download. Please refer to the product page for the link to the User Manual (PDF).