1. Compatibility
This product is designed for Ford vehicles equipped with the Sync2 system and an original 8-inch LCD screen. It adds full CarPlay and Android Auto functionality while retaining all original Sync2 features.
1.1 Compatible Models
The decoder box is compatible with the following Ford models with SYNC 2 system and original 8-inch LCD screen:
| Model | Year | System | Screen |
|---|---|---|---|
| F-150 | 2013-2014 | SYNC 2 | 8 inch LCD screen |
| Explorer | 2011-2016 | SYNC 2 | 8 inch LCD screen |
| Focus | 2012-2015 | SYNC 2 | 8 inch LCD screen |
| Escape | 2013-2015 | SYNC 2 | 8 inch LCD screen |
| Fiesta | 2015-2016 | SYNC 2 | 8 inch LCD screen |
| C-max | 2013-2015 | SYNC 2 | 8 inch LCD screen |
| Edge | 2011-2015 | SYNC 2 | 8 inch LCD screen |
| Mustang | 2015-2016 | SYNC 2 | 8 inch LCD screen |
| Fusion | 2012-2015 | SYNC 2 | 8 inch LCD screen |
| Expedition | 2015-2016 | SYNC 2 | 8 inch LCD screen |
| Super Duty | 2012-2016 | SYNC 2 | 8 inch LCD screen |
| Taurus | 2013-2015 | SYNC 2 | 8 inch LCD screen |
| Flex | 2013-2015 | SYNC 2 | 8 inch LCD screen |
Important Note: This CarPlay module is NOT compatible with Ford cars equipped with SYNC 1 or SYNC 3 systems.

Figure 1: Compatible Ford models and system versions.

Figure 2: Visual comparison of compatible (Sync 2) and incompatible (Sync 1, Sync 3) systems.
2. Setup and Installation
2.1 Accessories List
The product package includes the following components:

Figure 3: Decoder box and included cables (Power, CAN, USB, AUX, External Mic) and PCB board.
2.2 Dial Setup (DIP Switches)
The DIP switches on the decoder box need to be configured according to your vehicle's specifications. Refer to the diagram below for proper settings.

Figure 4: Location of DIP switches and TF card slot on the decoder box.
Important Note: If your car has an original camera, DIP switch NO.1 must be set to "ON". For manual transmission cars with an original reversing camera, connect the brown reversing signal detection line of the device to the power supply line of the reversing lights. Manual gear dialling code on 1/5/7/8.
2.3 Cables Connection Chart
Follow the diagram below to connect the cables correctly. Ensure all connections are secure.

Figure 5: General cable connection diagram for the CarPlay decoder box.
2.4 PCB Board Installation
The PCB board needs to be mounted onto the original FPC circuit board of the car. Ensure the ribbon cable and slot are neat and snapped correctly.

Figure 6: Correct orientation for PCB board installation. The letters on the FPC cable should face upwards.
Caution: Incorrect installation of the FPC touch cable (e.g., reverse installation) will cause the car screen touch to not work.
2.5 CarPlay Box & Wi-Fi Antenna Installation
The CarPlay box can be installed inside the storage box in front of the passenger seat or other suitable locations. The newly upgraded yellow module antenna is integrated into the module, so no external antenna is required.

Figure 7: Example of CarPlay box installation in the passenger footwell area.
Important: The Wi-Fi antenna should not be placed close to metal objects, as this can significantly degrade the signal quality.
2.6 Mic Installation
The external microphone should be installed in a suitable location for clear audio capture. The images below provide an example of mic installation and cable routing.

Figure 8: Example microphone placement near the rearview mirror.
2.7 Installation Video Guide
For a visual guide on dashboard removal and product installation, please watch the official video:
Video 1: Product installation and dashboard removal guidance.
You can also scan the QR code below for installation videos specific to Ford F-Series, Kuga, and Mondeo models:



Figure 9: QR codes for model-specific installation videos.
3. Operation
3.1 System Switching
The method to switch between the original car system and the CarPlay/Android Auto system varies by car model:
- Long-press the "previous" or "next" button for 2 seconds to switch between original system and CarPlay system.
- Alternatively, long-press the "OK" or "Sound" button for 2 seconds to switch the system, if your car has these buttons.

Figure 10: Steering wheel buttons used for system switching.
3.2 Sound Setup (AUX)
For sound transmission, ensure the "Aux out" is connected. Before using the CarPlay system, you must complete the "AV IN" setting to enable sound.
- Enter the "Entertainment" interface on your car's display.
- Click "Entertainment" then select "A/V In".

Figure 11: Steps to configure AV In for sound output.
Note: If the system automatically returns to the original page, unplug the AUX cable and plug it into the AUX socket on the car's handlebar box.
3.3 Wireless CarPlay / Android Auto Connection
To connect wirelessly:
- Disconnect or remove any existing Bluetooth connection between your phone and the car.
- Turn on your mobile phone's "Wi-Fi" switch.
- Turn on your phone's "Bluetooth" as well.
- Search for the product's Bluetooth. The Bluetooth name will be "Car Audio_XXXX".
- Pair your phone with the "Car Audio_XXXX" Bluetooth.
- Allow the sync.
- Start using CarPlay / Android Auto function.

Figure 12: Phone settings for wireless CarPlay/Android Auto connection.
3.4 Wired CarPlay / Android Auto
Connect the product to your phone using a USB cable to use wired CarPlay / Android Auto functionality.
3.5 Wireless AirPlay (iOS) / Android Mirroring
To use screen mirroring:
- If CarPlay is active, disconnect its connection (turn off your phone's Wi-Fi switch).
- On the main interface of the car screen, click the "Mirroring" icon.
- For iOS AirPlay:
- Select "iPhone" on the mirroring interface.
- Search and connect to the Wi-Fi network named "CarPlay_XXXX" (password: 88888888).
- Open your iPhone's shortcut menu, select "Screen Mirroring", and turn it on.
- For Android Mirroring:
- Download and install the "M-link" app on your Android phone. (Link: M-link App)
- Turn on your Android phone's Bluetooth and search for "Car Audio_XXXX" to pair.
- Go to your phone's "Mobile network" settings, select "Tethering & personal hotspot", and press "Portable WLAN hotspot".
- Configure the WLAN hotspot name and password to match the "Mirroring" interface on the car screen.
- Tick "Show advanced options" and select "5.0 GHz Band" for the hotspot AP frequency.
- Turn on the "Personal Hotspot" switch, return to the main interface of the phone, and open "m-Link" to use mirroring.

Figure 13: AirPlay and Android Auto Mirror Link in action.
3.6 Voice Control (Siri & Google Assistant)
With Siri on CarPlay and Google Assistant on Android Auto, you can keep your eyes on the road and hands on the wheel. Use your voice to find routes, play music, get news, or check the weather.

Figure 14: Voice control functionality with Siri and Google Assistant.
3.7 USB Playback
Insert a USB flash drive into the USB connector to play various formats of music or video directly on your car's screen.

Figure 15: USB media playback feature.
3.8 Original Car Control Integration
The system is compatible with your original car's controls, including knob control and steering wheel controls for functions like volume adjustment and track skipping.

Figure 16: Integration with original car controls.
4. Rear Camera and 360 Camera
4.1 Original Camera Setting
If your car has an original camera, ensure DIP switch NO.1 is set to "ON" for proper functionality.
4.2 Aftermarket Rear Camera
For aftermarket rear cameras, connect the cables as shown in the diagram below. The system supports front view camera, DVR (with CVBS), and rear view camera (CVBS/AHD 720P).

Figure 17: Aftermarket rear camera wiring connections.

Figure 18: Rear camera AHD HD Reversing display.
4.3 Aftermarket 360 Camera
For aftermarket 360 cameras, connect cables NO. 3 and NO. 9 (REVERSE CAMERA IN and 360CAMERA CONTROL) as per the wiring diagram.
5. Troubleshooting
5.1 No Sound After Installation?
- Check if the AUX cable is installed correctly.
- Ensure the car's audio is set to AUX mode.
- Delete any previous car Bluetooth connections from your mobile phone.
5.2 No Touch on the Screen After Installation?
- Check the small FPC cable. The letters on the cable should be on the front side (facing upwards) for correct installation. Reverse installation will cause touch screen issues.
5.3 Reverse Camera Does Not Show After Installation?
- Check the DIP switch settings.
- If the original car comes with a reversing camera, ensure DIP switch NO.1 is ON.
- For automatic gear cars, DIP switches 1/4/7/8 should be ON.
- For manual gear cars, DIP switches 1/5/7/8 should be ON.
5.4 How to Connect Wireless CarPlay and Android Auto?
- Your mobile phone only needs to connect to the decoder box's Bluetooth.
- Ensure your mobile phone's Bluetooth is in an idle state (not connected to other devices like watch recorders).
- Connecting to Bluetooth will automatically initiate Wi-Fi transmission. You do not need to manually enter the Wi-Fi password.
6. Specifications
The CARABC Wireless Carplay Android Auto Decoder Box offers a range of features and specifications:
- Functions: Wireless Apple CarPlay, iOS AirPlay mirror link, Android Auto, Android phone mirror link, support for aftermarket rear view & DVR, USB play (music, video), EQ adjustable audio, original car wire plug and play (non-destructive installation).
- Dimensions:
- Length: 143mm
- Width: 98mm
- Height: 23mm
- Weight: 0.933 kg
- System Integration: Supports original car button and steering wheel control. Integrates with console or glove box USB.
- Antenna: Newly upgraded yellow module antenna is integrated into the module; no external antenna is required.

Figure 19: Overview of Wireless CarPlay and Android Auto features.

Figure 20: Key features of the CarPlay decoder box.
7. User Tips
- Ensure all cables are securely connected and not installed upside down or tilted to prevent functionality issues.
- Properly configure the DIP switches according to your car's specific setup, especially regarding the original camera and transmission type.
- Always disconnect existing phone-to-car Bluetooth connections before attempting to connect to the decoder box's Bluetooth for wireless CarPlay/Android Auto.
- For optimal Wi-Fi signal, avoid placing the decoder box's antenna near metal objects.
8. Support and Contact
For further assistance, technical support, or any questions regarding your CarPlay Decoder Box, please contact us:
- WhatsApp: +8618923410098
- E-mail: 5660103@qq.com
You can also refer to the full user manual in PDF format for more detailed information: View User Manual (PDF)