MOES Tuya Zigbee Smart Ceiling LED Light Instruction Manual

1. Product Introduction

The MOES Tuya Zigbee Smart Ceiling LED Light (Model ZL5235TD) is a compact, ultra-thin luminaire designed primarily for indoor applications. Its low-profile housing makes it ideal for installations with limited ceiling space. This smart light supports adjustable brightness and color temperature, offering flexible illumination to meet diverse lighting requirements in homes, offices, retail stores, and various other environments.

2. Safety Warnings

• It is recommended that the fittings are installed by a qualified electrician. Ensure the installation complies with current IEE wiring regulations and local building control standards.
• Always switch off the mains supply before installation, maintenance, or any service.

3. Product Specifications

Figure 1: Product Dimensions

4. Setup Instructions

4.1. Important Pre-requisite

Note: A Zigbee gateway (hub) is required for the smart ceiling light to function. Please ensure you have a Zigbee gateway purchased in addition.

Figure 2: Zigbee Gateway Connection Diagram

4.2. Download and Register the MOES App

1. Download MOES App: Search for "MOES" in your device's App Store (iOS) or Google Play Store (Android), or scan the QR code provided in the product packaging. While Tuya Smart/Smart Life App still works, MOES App is highly recommended for enhanced compatibility and features.
2. Registration or Login:
   • Open the "MOES" application.
   • Enter the Register/Login interface.
   • Tap "Register" to create a new account by entering your phone number to receive a verification code and then setting your password.
   • If you already have a MOES account, select "Log in" and enter your credentials.

4.3. Connecting the Smart Ceiling Light to the App

1. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network and that your Zigbee hub is already connected and configured within the MOES App.
2. Prepare the Light for Pairing: The ceiling light needs to be set to a flashing state to enter pairing mode. Follow these steps:
   • Step 1/2: Turn the light switch ON-OFF-ON-OFF-ON-OFF-ON. Ensure the time interval between each operation is not too short. After the final "ON", turn it off.
   • Step 2/2: Confirm that the light is now flashing (approximately 2 times per second). This indicates it's ready for pairing.
3. Add the Zigbee Light to the Hub:
   • In the MOES App, navigate to your Zigbee hub and select the option to add a new device.
   • The app will search for nearby Zigbee devices. The configuration process may take between 10-120 seconds, depending on network conditions.
   • Once the device is successfully added, you can edit its name for easy identification. Click "Done" to enter the device control page.
   • You can now control your smart ceiling light from anywhere using the MOES App.

5. Operating Instructions

5.1. Brightness Adjustment

Adjust the light intensity from 1% to 100% to suit your needs, from a soft glow to full brightness.

Figure 3: Brightness Adjustment

5.2. 16 Million Colors and Tunable White

Choose from a vast spectrum of 16 million colors or adjust the white light temperature from warm (1800K) to cool (6500K) to create the perfect ambiance.

Figure 4: Color and White Temperature Control

5.3. APP Remote Control

Control your ceiling light from anywhere using the MOES App on your smartphone or tablet.

Figure 5: Remote Control via App

5.4. Voice Control

Integrate your light with Amazon Alexa or Google Home for convenient voice commands. Simply say "Alexa/OK Google, turn off the light".

Figure 6: Voice Control Functionality

5.5. Music Sync Function

Synchronize your light's colors and effects with your music for an immersive audio-visual experience.

Figure 7: Music Synchronization

5.6. Timing Function

Schedule your lights to turn on/off automatically at specific times, making your daily routine easier and more convenient.

Figure 8: Timing Function in Use

5.7. Multiple Scene Modes

Switch effortlessly between 8 pre-set scenes (Night, Read, Working, Leisure, Soft, Colorful, Dazzling, Gorgeous) to create the perfect ambiance for any moment.

Figure 9: Available Scene Modes

5.8. Group Control

Control multiple lights simultaneously for synchronized effects and effortless management across different rooms in your home.

Figure 10: Group Control Feature

5.9. Power Memory

After a power outage, the light can be configured to remain off upon power return, preventing unwanted disturbances. You can also set it to restore the last used state or a customized state.

Figure 11: Power Memory Functionality

5.10. Special Timer with Buffer

Customize timers with an extra delay (buffer) for smoother transitions, such as a gradual dimming for sleep, enhancing comfort in daily life.

Figure 12: Timer with Buffer Settings

6. Maintenance and Storage

6.1. Storage

Before installation or if storing the product, keep it in a well-ventilated and dry indoor environment. The recommended storage temperature range is -40°C to +100°C, with a relative humidity of ≤85% RH. The storage area must be free from acids, alkalis, salts, corrosive or explosive gases, and flammable materials. Protect the product from dust, rain, and snow.

6.2. Cleaning

To clean the light, ensure it is turned off and cool. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.

7. User Tips

• For optimal smart home integration, ensure your Zigbee gateway is centrally located within your home.
• Utilize the "No Disturb from Power Cut" feature to prevent the light from turning on unexpectedly after a power outage, especially in bedrooms.
• Experiment with the "Special Timer with Buffer" for a gentle wake-up or wind-down routine.

8. Troubleshooting

If you encounter problems installing or operating your MOES Smart Ceiling LED Light, please refer to the product data sheet and support resources:

• Product Data Sheet: https://www.moestech.com/blogs/news/zcl-td23-rcw-y01
• Voice Control Setup Guide: For detailed instructions on connecting with Amazon Alexa and Google Home, visit: https://www.moestech.com/blogs/news/smart-device-linked-voice-speaker

9. Declaration of Conformity

Hereby, WENZHOU NOVA NEW ENERGY CO.,LTD declares that the radio equipment type ZL5235TD is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, and 2011/65/EU.

The full text of the EU declaration of conformity is available at:

https://www.moestech.com/blogs/news/zcl-td23-rcw-y01

10. Recycling Information

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

11. Warranty Information

Thank you for purchasing this product. The warranty for this product is granted as follows:

11.1. Warranty Period

Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer.

11.2. Exercising Warranty Rights

To exercise warranty rights, the purchaser must present:

1. The warranty card.
2. Proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase), unless the purchase date is indicated on the warranty card.

11.3. Warranty Claim Process

If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and return it to the place of purchase to apply for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee will be charged.

11.4. Product Protection During Transport

We recommend properly protecting the goods when delivering them for warranty service. Use original packaging with padding to ensure safe transportation. If replacement packaging is used, ensure the product is adequately protected from damage. We recommend placing a sticker indicating susceptibility to impact, such as "Warning Glass".

11.5. Defect Resolution

Reported defects covered by the warranty will be considered immediately and no later than 14 days from the date of delivery of the goods for service. Services will repair the product within a reasonable time, not exceeding 30 days from the date of delivery. If hard-to-find spare parts are required, this deadline may be extended.

11.6. Warranty Exclusions

The warranty does not cover:

• Performance of maintenance and similar operations specified in the user manual, which users are obliged to do themselves.
• Defects due to natural wear and tear during use.
• Mechanical damage caused by the user's fault and product defects caused by such damage.
• Damage caused by improper use of the product.

11.7. Warranty Expiration

The rights under the guarantee will expire if:

• The warranty seal is removed from the product.
• The serial number is removed from the product.
• Action is taken to eliminate physical defects in the product outside of authorized service.
• Non-original parts and consumables are used.

12. Support and Contact Information

12.1. Manufacturer

WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815

12.2. After-sale Service

Email: service@moeshouse.com

12.3. Follow Us

Stay connected with MOES for updates and support:

• Facebook: @moessmart
• YouTube: MOES.Official
• X (Twitter): @moes_smart
• TikTok: @moes_smart
• Instagram: @moes_smart
• Website: www.moes.net