LISHANDZ WSN7B Wired Dynamic Microphone User Manual

1. Introduction

The LISHANDZ WSN7B is a professional and dynamic wired microphone designed for various applications including live performances, radio commentary, recording, and studio use. Its robust construction and cardioid polar pattern ensure clear sound reproduction and effective rejection of off-axis noise.

Key Features:

• Cardioid Polar Pattern: Effectively reduces feedback and isolates the main sound source.
• Clear Tone Quality: Delivers high-quality sound without 'pop' noise.
• Durable Construction: Solid metal structure for reliability and longevity.
• Integrated Windscreen: Reduces wind and breath noise.
• Stable & Reliable: Designed for consistent performance.

2. Setup

2.1 Connecting the Microphone Cable

The WSN7B microphone uses a standard XLR connector for audio output.

1. Insert the XLR connector: Align the 'Key' on the XLR connector with the 'Groove' in the microphone's input port. Push the connector firmly into the microphone until it clicks into place.
2. Secure Connection: Ensure the connector is fully seated and locked to prevent accidental disconnection during use.

2.2 Disconnecting the Microphone Cable

1. Depress the Tab: Locate the release tab on the XLR connector. Press and hold this tab.
2. Pull Connector Away: While holding the tab, grasp the connector and pull it straight away from the microphone. Do not pull on the cable itself.

2.3 Mounting the Microphone

The microphone is equipped with an integrated stand adapter for easy mounting on standard microphone stands. Adjust the angle of the microphone as needed for optimal sound capture.

3. Operating Instructions

3.1 General Usage

1. Aim the Microphone: For best gain-before-feedback and isolation from undesired background noise, aim the microphone directly towards the sound source (e.g., the speaker's mouth, instrument) and away from other sound sources.
2. Maintain Proximity: For vocal applications, position the microphone within 6 inches (approximately 15 cm) of the sound source for optimal clarity and presence.
3. Connect to Audio Equipment: Connect the microphone's XLR cable to a mixer, audio interface, or public address system.

3.2 Important Cautions During Operation

• Do Not Cover the Grille: Avoid covering any part of the microphone grille with your hand. Covering the grille alters the sound characteristics and polar pattern, increasing the likelihood of feedback.
• Avoid Howling: If the microphone head is covered or brought too close to a speaker, a howling sound may occur. To prevent this, first decrease the volume, then reposition the microphone so it is not pointed directly at the speaker, ensuring sufficient distance.

4. Maintenance

4.1 Cleaning the Microphone

• Grille and Windscreen: It is important to keep foreign particles out of the grille and windscreen, as they can alter the microphone's frequency response. Periodically clean the grille using warm, soapy water. Rinse with plain water and allow it to dry completely before reattaching.
• Microphone Body: Wipe the microphone body with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

4.2 General Care and Storage

• Avoid Physical Shock: Due to the high sensitivity of the cartridge, do not drop the microphone from a height or apply strong shock to it.
• Protect from Elements: To maintain the sensitivity and quality of sound reproduction, avoid exposing the microphone to moisture and extreme temperatures. Store the microphone in a dry, temperate environment when not in use.

5. Troubleshooting

5.1 Howling or Feedback

• Cause: Microphone too close to speakers, microphone pointed at speakers, or excessive gain.
• Solution: Decrease volume, reposition microphone away from speakers, ensure microphone is not pointing directly at speakers, or reduce gain on the mixer/audio interface.

5.2 No Sound Output

• Cause: Cable not properly connected, faulty cable, incorrect input selection on mixer/interface, or gain set too low.
• Solution: Ensure XLR cable is securely connected at both ends. Test with a different cable. Verify the correct input channel is selected and unmuted on your audio equipment. Increase input gain gradually.

5.3 Distorted Sound

• Cause: Input gain too high (clipping), faulty cable, or microphone damage.
• Solution: Reduce input gain on your mixer/audio interface until distortion disappears. Test with a different cable. If distortion persists, the microphone may be damaged.

6. Specifications

7. User Tips

• Experiment with Placement: Different microphone placements can drastically change the sound. Experiment with distance and angle to find the best sound for your voice or instrument.
• Use a Pop Filter: While the WSN7B has an integrated windscreen, an external pop filter can further reduce plosive sounds (like 'p' and 'b') for cleaner vocal recordings.
• Cable Management: Use high-quality XLR cables and manage them properly to avoid tangles, trips, and potential damage to the connectors or microphone.
• Monitor Your Sound: Always monitor your audio through headphones or speakers to catch any issues like feedback or distortion early.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

For additional documentation, including a PDF version of the user manual, please refer to the product page or contact customer support.