ANYFAR Motorcycle CarPlay Screen

Contents

ANYFAR 5-inch Motorcycle CarPlay Screen User Manual

Model: Motorcycle CarPlay Screen

1. Introduction

Thank you for choosing the ANYFAR 5-inch Motorcycle CarPlay Screen. This device is designed to enhance your riding experience by providing seamless access to navigation, music, and communication features directly on your motorcycle. With its robust IP67 waterproof rating and support for both wireless CarPlay and Android Auto, you can enjoy your journey in any weather condition.

ANYFAR 5-inch Motorcycle CarPlay Screen with icons for Wireless Android Auto, Wireless CarPlay, IP67, and Bluetooth 5.0
Figure 1: ANYFAR 5-inch Motorcycle CarPlay Screen, highlighting key features.

2. Safety Information

Please read all safety warnings and instructions carefully before using this product to ensure safe operation and prevent damage. Keep this manual for future reference.

  • Always ensure the device is securely mounted before riding.
  • Do not attempt to operate the device or adjust settings while riding, as this can distract you and lead to accidents.
  • Ensure all wiring is correctly installed and protected to prevent short circuits or electrical hazards.
  • The device is IP67 waterproof, but avoid prolonged submersion or high-pressure water jets.

3. Package Contents

Verify that all items are present in your package:

  • 5-inch Motorcycle CarPlay Screen
  • Power Cable (with fuse)
  • Mounting Bracket
  • Optional: Front Camera (if purchased)
  • Optional: Rear Camera (if purchased)
  • Optional: TPMS Sensors (Front and Rear, if purchased)
Diagram showing the 5-inch Motorcycle CarPlay screen, power cable, and mounting bracket.
Figure 2: Included accessories: Motorcycle CarPlay screen, Power Cable, and Bracket.

4. Specifications

FeatureDescription
Screen Size5 inches
Waterproof LevelIP67
ConnectivityWireless CarPlay, Wireless Android Auto, Dual Bluetooth BT5.0, WiFi, PhoneLink
Dimensions (approx.)137mm (Length) x 80mm (Height)
OriginMainland China
Optional FeaturesTPMS (Tire Pressure Monitoring System), Front/Rear Cameras

5. Installation

5.1 Wiring Diagram

Follow the diagram below for proper electrical connection. Ensure the motorcycle is turned off before beginning installation.

Wiring diagram for the Motorcycle CarPlay screen, showing connections for power, ground, and optional cameras.
Figure 3: Installation Diagram. Connect the red power wire to the motorcycle battery positive terminal, and the black ground wire to the negative terminal. Connect ACC power supply and negative terminal. The screen connects to the motorcycle CarPlay screen via a dedicated cable. Optional front and rear cameras are also shown with waterproof and detachable connectors.

5.2 Mounting the Device

Use the provided mounting bracket to securely attach the CarPlay screen to your motorcycle's handlebars or a suitable location. Ensure the screen is positioned for optimal visibility without obstructing your view of the road or controls.

6. Operation

6.1 Powering On/Off

Once correctly wired, the device will power on with your motorcycle's ignition. To manually power off, press and hold the power button (location may vary, refer to device for exact button).

6.2 Wireless CarPlay & Android Auto

The device supports wireless CarPlay and Android Auto. To connect your smartphone:

  1. Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
  2. On the CarPlay screen, navigate to the CarPlay or Android Auto icon.
  3. Follow the on-screen prompts to pair your phone via Bluetooth. Once paired, the system will automatically establish a Wi-Fi connection for CarPlay/Android Auto functionality.

6.3 Navigation

Utilize online navigation apps through CarPlay or Android Auto for real-time directions and route information. The 5-inch display provides clear visuals for easy following.

Motorcycle CarPlay screen displaying a navigation map while mounted on a motorcycle.
Figure 4: Online Navigation in action on the CarPlay screen.

6.4 Music and Media

Stream music and other audio content from your smartphone directly to the CarPlay screen. The intuitive interface allows you to control playback, browse libraries, and access podcasts or audiobooks.

Motorcycle CarPlay screen showing various music and media applications.
Figure 5: Support for online music and media playback.

7. Optional TPMS Setup

If you have purchased the optional Tire Pressure Monitoring System (TPMS), follow these steps to pair the sensors and monitor your tire pressure in real-time.

7.1 TPMS Sensor Installation

Install the TPMS sensors onto your motorcycle's tire valves. Ensure the 'A' sensor is on the front wheel and the 'B' sensor is on the rear wheel, as indicated on the sensors themselves.

Diagram showing the installation of TPMS sensors on motorcycle wheels, with recommended tire pressures.
Figure 6: TPMS sensor installation. Front wheel: 2.0 bar, Rear wheel: 2.5 bar.

7.2 TPMS Pairing Process

To pair the TPMS sensors with your CarPlay screen:

  1. Turn on the CarPlay screen.
  2. Navigate to the settings menu and select the 'TPMS' option.
  3. On the TPMS screen, initiate pairing for the front wheel (labeled 'FRO' or similar).
  4. Install the 'A' sensor onto the front wheel valve. The screen should display a successful pairing message and show the front tire pressure.
  5. Repeat the process for the rear wheel (labeled 'BAC' or similar) using the 'B' sensor.
  6. You can adjust the low and high pressure alarm values as needed within the TPMS settings.

Watch the video below for a visual guide on TPMS pairing:

Video 1: Demonstration of TPMS sensor pairing with the Motorcycle CarPlay Screen.

8. Maintenance

8.1 Cleaning

Wipe the screen and device body with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the screen or casing. The IP67 rating ensures dust and water resistance, making cleaning straightforward.

Motorcycle CarPlay screen being splashed with water, demonstrating its IP67 waterproof feature.
Figure 7: The device features IP67 waterproofing, protecting it from rain and splashes.

8.2 Storage

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.

9. Troubleshooting

If you encounter issues with your Motorcycle CarPlay Screen, please refer to the following common solutions:

  • Device not powering on: Check all power connections, including the fuse. Ensure the motorcycle battery has sufficient charge.
  • CarPlay/Android Auto not connecting: Ensure Bluetooth and Wi-Fi are active on your phone. Try forgetting the device on your phone and re-pairing. Restart both the phone and the CarPlay screen.
  • No sound: Check the volume settings on both the CarPlay screen and your connected smartphone. Ensure your helmet's audio system (if applicable) is correctly paired and functioning.
  • TPMS sensors not pairing: Ensure sensors are correctly installed on the correct wheels (Front 'A', Rear 'B'). Follow the pairing steps carefully, ensuring you initiate pairing on the screen before installing the sensor.

For more detailed troubleshooting, please consult the full user manual PDF.

10. User Tips

  • For optimal performance, keep your smartphone's operating system and apps updated.
  • Adjust screen brightness for best visibility in varying light conditions.
  • Regularly check tire pressure, even with TPMS, for safety and tire longevity.

11. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official product documentation or contact the seller directly. A detailed user manual is available in PDF format for comprehensive guidance:

View Full User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.