1. Introduction
The Tuya WB5 5-in-1 LED Controller is a versatile IoT LED controller designed for various LED strip types. It features a dual-mode (2.4GHz WiFi and Bluetooth LE5.0) chip, enabling seamless control via a smartphone app, RF remote, or voice commands through smart home platforms like Alexa and Google Home. This controller offers advanced features including multi-segment LED strip music effects and Matrix LED music spectrum effects, providing a dynamic and personalized lighting experience.
Video: Demonstration of the WB5 5-in-1 LED Controller's capabilities with various LED strip types and app control.
2. Product Features
- High-performance, low-power consumption 2.4G Bluetooth microprocessor.
- Compatible with 12 different types of LEDs, including 1/2/3/4/5CH W/CCT/RGB/RGBW/RGBCCT PWM and addressable LEDs, as well as addressable+PWM combined LEDs.
- Supports App control, 2.4G touch remote control, and 2.4G touch 86-type panel control.
- Remote control and 86-type control panel can be set up for zone-control (up to 4 zones) or unified control (ALL).
- Supports setting various on/off animations and default power-on states.
- Allows modifying device name, color order correction, and setting timers.
- Supports 3 kinds of music capture modes: cell phone microphone, player streaming, and on-board microphone.
- Features 5 major control pages in the App: dynamic, static, music, custom, and settings, with content adapting to the selected LED type.
- All-new upgraded music effects, including multi-segment LED strip music effects and Matrix LED music spectrum effects.
- Supports OTA (Over-The-Air) firmware upgrades.
- Integrated with "BanlanX Cloud" for stable IoT smart home cloud connections.
- Supports third-party voice control systems like Amazon Alexa, Google Home, IFTTT, AliGenie, DuerOS, Rokid, and Mi.
3. Specifications
| Attribute | Value |
|---|---|
| Model Number | WB5 (Tuya LED Controller) |
| Input Voltage | DC12V~24V (5.5*2.1mm) |
| Output Current (per channel) | 6A |
| Total Output Max. | 15A |
| Max. Load Power | 360W |
| Working Temperature | -20°C to 60°C |
| Communication Mode | WiFi-IEEE 802.11b/g/n 2.4GHz |
| RF Frequency | 2.4GHz |
| Remote Distance | 30m |
| Controller Dimensions | 78mm * 56mm * 20mm |
| Controller Weight | 73g |
| Material | Plastic |
| Power Source | DC |
| Certification | CCC, CE, FCC, ROHS |
| Warranty | 2 years |

Image: Dimensions of the WB5 5-in-1 LED Controller and its 2.4G RF Remote.
4. Safety Information
Attention Please:
- Always verify that the input voltage of your constant voltage power supply matches the controller's requirements (DC12V~24V). The controller will be damaged if the voltage exceeds 24V. Also, ensure correct connection of both cathode and anode.
- Non-professional users should not attempt to dismantle the controller directly, as this may lead to fire or electric shock.
- The operating temperature range is -20°C to 60°C. Avoid using the device in direct sunlight, moist environments, or other high-temperature areas.
5. Setup Guide
5.1. Wiring Diagram
The controller input voltage must match the required voltage of the LED strips. Input voltage equals output voltage.

Image: Wiring diagrams for Single Color, CCT, RGB, RGBW, and RGB+CCT LED strips connected to the WB5 controller.
Different types of LED strips correspond to specific output ports on the controller. Ensure the ports match the selected LED type as described below:
| NO. | LED Type | Output Port | |||||||
|---|---|---|---|---|---|---|---|---|---|
| VCC | R | G | B | CW | WW | DAT | GND | ||
| 1 | 1CH PWM Single Color | ✓ | ✓ | ✓ | |||||
| 2 | 2CH PWM CCT | ✓ | ✓ | ✓ | ✓ | ||||
| 3 | 3CH PWM RGB | ✓ | ✓ | ✓ | ✓ | ✓ | |||
| 4 | 4CH PWM RGBW | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||
| 5 | 5CH PWM RGBCCT | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
| 6 | SPI Single Color | ✓ | ✓ | ✓ | |||||
| 7 | SPI CCT | ✓ | ✓ | ✓ | |||||
| 8 | SPI RGB | ✓ | ✓ | ✓ | |||||
| 9 | SPI RGBW | ✓ | ✓ | ✓ | |||||
| 10 | SPI RGBCCT | ✓ | ✓ | ✓ | |||||
| 11 | SPI RGB+1CH PWM Single Color | ✓ | ✓ | ✓ | ✓ | ||||
| 12 | SPI RGB+2CH PWM CCT | ✓ | ✓ | ✓ | ✓ | ✓ | |||
5.2. App Installation
The WB5 controller supports App control for iOS and Android devices. Apple devices require iOS 10.0 or higher, and Android devices require Android 4.4 or higher.
- Search for "BanlanX" or "Tuya Smart" in your device's App Store (iOS) or Google Play Store (Android).
- Download and install the application.
- Alternatively, scan the QR code provided in the manual (refer to the PDF manual for the exact QR code) to download the app.
5.3. Device Pairing
- Link/Unlink Mode: Long press the "SET" button on the controller for 3 seconds. The purple pilot lamp will blink, indicating the device has entered Link/Unlink mode and Smart Link mode.
- Add Device in App: Open the installed App and click the "+" icon in the top right corner of the home page to add your device. Follow the on-screen instructions to complete the pairing process.
- Bluetooth Control: Note that Bluetooth control will become available after the device has been successfully linked via the WiFi App.
5.4. LED Type Configuration
- Initial Setup: During the initial App setup, you will be prompted to set the LED type and calibrate the color order.
- Changing Settings: To modify these settings later, click the settings icon in the upper right corner of the App. Here you can change the device name, LED type, calibrate the color order, set timings, and configure on/off effects.
- Switching Output Mode: Short press the "SET" button on the controller to switch the output mode. The pilot lamp will flicker in different colors to indicate the successful switch to a corresponding output mode (e.g., Red for RGB, Green for RGBW, Blue for CCT, etc.).
6. Operation
6.1. App Control
The App provides comprehensive control over your LED lighting. The main control pages include:
- Dynamic: For animated lighting effects.
- Static: For solid colors and static scenes.
- Music: For music synchronization effects.
- Custom: For creating personalized lighting scenes.
- Setting: For device configuration and advanced options.
The content displayed on these pages will vary depending on the LED type you have selected.

Image: Control your LED lights anytime and anywhere using the smartphone app.
6.2. RF Remote Control
The WB5 controller is compatible with 2.4G touch remote controls and 86-type panel controls. These remotes can be used for zone-control (dividing your lighting into up to 4 zones) or for unified control of all lights.

Image: The 2.4G RF Remote control allows for full color range change, dimming, and mode selection.
Remote Functions:
| Function | Description |
|---|---|
| ON/OFF | Turns the lights on or off. |
| Brightness Level | Adjusts the brightness of the lights. |
| Warm/Nature/Cold White | Cycles through different white light temperatures. |
| Color HUE/Temperature Ring | Selects specific colors or color temperatures. |
| Speed | Adjusts the speed of dynamic effects. |
| Mode+/Mode- | Cycles through different lighting modes. |
| Music Effect | Activates music synchronization effects. |
| 1-4 Zones / All Zones | Selects individual zones or all zones for control. |
Binding/Unbinding Remote: Within 20 seconds after powering on the controller, long press the ON key on the remote to bind or unbind it.
Setting Zones: Within 20 seconds after powering on the controller, long press the Zone1~4 or ZoneAll button on the remote to set the zones.
6.3. Voice Control
The WB5 controller supports third-party voice control systems, allowing you to manage your lighting with simple voice commands. Compatible systems include Amazon Alexa and Google Home.

Image: The WB5 controller supports voice control via Amazon Alexa and Google Assistant.
7. Maintenance
- Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
- Ensure the operating environment adheres to the specified temperature range (-20°C to 60°C) to prevent damage.
- Avoid exposing the device to direct sunlight, high humidity, or extreme temperatures.
- Regularly check all wiring connections to ensure they are secure and free from damage.
8. Troubleshooting
- No Power/Lights Not Turning On: Verify that the input voltage from your power supply matches the controller's requirements (DC12V~24V) and that all power connections (cathode and anode) are correctly wired.
- App Connectivity Issues: Ensure your smartphone is connected to a 2.4GHz WiFi network. If using Bluetooth control, ensure it has been enabled after initial WiFi pairing. Restart the App and the controller if necessary.
- Remote Control Not Responding: Check the battery in the remote control. If the remote is new or has been replaced, ensure it is properly bound to the controller by long-pressing the ON key within 20 seconds of controller power-on.
- Incorrect Colors/Effects: Access the App's settings page to verify that the correct LED type is selected and the color order is calibrated properly.
- Voice Control Not Working: Ensure the controller is properly linked to your smart home platform (Alexa, Google Home) and that your voice assistant device is online and configured correctly.
9. User Tips
- For optimal performance and stability, ensure your WiFi network is strong and reliable in the area where the controller is installed.
- When setting up complex lighting zones, label your LED strips clearly to avoid confusion during configuration.
- Take advantage of the timer functions in the app to automate your lighting schedules, saving energy and adding convenience.
- Explore the music synchronization features with different music capture modes to create immersive audio-visual experiences.
10. Warranty and Support
This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
For detailed information and further assistance, you can refer to the comprehensive user manual available in PDF format: