MAXPG T4 Portable Projector User Manual

1. Safety Instructions

• Do not switch on or operate the unit before you have read the instruction manual.
• Do not look into the lens directly—this can cause eye damage.
• Do not let children get close to the projector as they may look into the lens directly.
• Do not turn on the projector before connecting with other components.
• Do not attempt to disassemble the machine; disassembly poses safety risks and will void responsibility.
• Do not cover the surroundings of the projector with soft materials such as blankets. It is recommended to place the device on a table for use.
• Do not use the projector in a wet environment, and do not place liquids on or close to the projector. Please pull out the power plug from the wall socket if the projector overheats and smoke appears.
• Do not block the air inlet and ensure the projector is placed in a well-ventilated location.

2. Product Overview

The MAXPG T4 Portable Projector is a versatile device designed for home theater and entertainment. It features 550 ANSI Lumens, native 720P resolution with 1080P support, Android 11 operating system, and WiFi6 connectivity.

2.1 Package Contents

Upon opening the box, you will find the following items:

• MAXPG T4 Portable Projector
• Remote Control
• Charging Plug (Power Adapter)
• User Manual

2.2 Key Features

• Display Technology: LCD
• Brightness: 550 ANSI Lumens
• Native Resolution: 1280x720dpi (Supports 4K decoding)
• Contrast Ratio: 4000:1
• Operating System: Android 11
• Connectivity: WiFi6, Bluetooth-compatible
• Projection Size: 40-200 inches
• Projection Distance: 0.5-2m
• Keystone Correction: Manual Correction, Auto Correction
• Built-in Speaker: Yes
• Portable: Yes

Image: MAXPG T4 Projector showcasing its ultra-short throw capability and key features.

2.3 Physical Dimensions & Interfaces

• Dimensions: Approximately 9.1cm (width) x 9.1cm (height) x 16cm (length)
• Net Weight: 0.57 kg (570g)
• Interfaces: HDMI IN, USB, TF (MicroSD card slot), AUX (3.5mm audio output)

Image: Physical dimensions of the MAXPG T4 Projector.

Image: Available ports on the MAXPG T4 Projector.

3. Setup Guide

3.1 Initial Power On

1. Connect the charging plug to the projector and a power outlet.
2. Press the power button to turn on the projector.

3.2 Navigation at First Boot

When you first turn on the projector, you will be guided through initial setup steps:

1. Language Selection: Select your preferred system language from the list. The projector supports multiple languages including English (USA, Australia, Canada, India, UK), Filipino, Indonesian, Kiswahili, Malay, Dutch, Turkish, Hungarian, Uzbek, Polish, Portuguese, Romanian, Albanian, Slovak, Slovenian, Finnish, and Azerbaijani.
2. Wi-Fi Connection: Connect to your available wireless network. You can do this via the icon in the upper right corner of the homepage or through the settings menu. Follow the on-screen prompts to complete the connection.
3. Time Settings: Adjust the time settings according to your needs. You can choose to automatically determine date and time or set it manually.
4. Calibration Page: The projector may present a calibration page. Manual calibration can be selected if needed, otherwise, you can skip this step by selecting 'Next'.
5. Background Selection: Choose your preferred background page or wallpaper.

Image: Language selection interface.

Image: Android 11 interface with various applications.

4. Operation

4.1 Remote Control Functions

The remote control allows you to navigate the projector's interface and settings:

4.2 Focus Adjustment

The projector features a focus button for manual adjustment. Rotate the focus button on the projector to achieve a clear image.

4.3 Keystone Correction

The projector supports both automatic and manual keystone correction to adjust the image shape.

• Auto Keystone: The projector can automatically correct the image shape.
• Manual Calibration: For fine-tuning, navigate to 'Projection settings' from the home page, select 'Keystone Correction', and then 'Manual calibration' to adjust the projection gradient.

4.4 Projection Mode

To change the projection orientation (e.g., front, rear, ceiling), navigate to 'Projection settings' from the home page and select 'Projection Mode'.

4.5 Screen Mirroring & Casting

Ensure your projector and mobile device (phone, tablet, or laptop) are connected to the same Wi-Fi hotspot.

4.5.1 Android Devices (Miracast)

1. On the projector, open the Miracast application. The projector will display "Projector waiting for connection".
2. On your Android device, select the projector from the screen mirroring system list to start mirroring.

4.5.2 iOS Devices (ApowerMirror)

1. On the projector, open the ApowerMirror application. The projector will wait for a connection.
2. On your iOS device, select the projector from the screen mirroring system list to start mirroring.

4.5.3 General Casting (Video Apps)

1. Open a video application on your mobile device and play the video you wish to mirror.
2. Tap the cast icon (usually a screen with a Wi-Fi symbol) within the video player to begin casting to the projector.

4.6 App Management (Android Desk)

The projector runs on Android 11, providing access to various applications.

• Android Desk: Select different menu icons to enter the application interface from the User interface.
• Menu Bar: From left to right at the top of the home page, you can access Time, Settings, Full-function Calibration, HDMI, Search, and Wi-Fi. Select an option and click OK to enter the corresponding page.
• My Apps: Select the list of apps on your home page to view installed applications.
• App List: Select the application you want to use from the App List.
• App Uninstall: To uninstall an app, select it from the App List, press the remote control menu key, and choose "Uninstall". Follow the on-screen prompts.

4.7 File Manager

You can view and access files from connected USB devices or TF cards using the built-in file manager.

5. Specifications

6. Troubleshooting

• No Internet Connection: Check your network connection and ensure wireless network settings are correct.
• Audio Output Issues: Check the audio connection and adjust the volume settings.
• No Display or Abnormal Display: Ensure the HDMI connection is secure and try replacing the HDMI cable.
• Projector Fails to Power On: Check the power connection and ensure the power outlet is functioning properly.
• Other Issues: Refer to this user manual or contact the relevant personnel for assistance.

6.1 Resetting to Factory Settings

If you encounter persistent software issues, you can reset the projector to its factory settings:

1. From the home page, navigate to the Settings interface.
2. Go to the "About" section.
3. Select "Restore factory settings" and follow the on-screen prompts to complete the system reset.

7. User Tips

• For the best viewing experience, use the projector in a dark room.
• Experiment with different projection distances to find the optimal screen size for your space.
• Regularly check for system updates in the settings menu to ensure you have the latest features and performance improvements.
• Keep the lens clean using a soft, lint-free cloth to maintain image clarity.
• Utilize the arbitrary rotation feature to project onto ceilings or walls for flexible viewing angles.

8. Warranty & Support

8.1 Disclaimers

Our company reserves the right to make changes to the contents of this instruction manual without any advance notice. Please kindly understand.

8.2 Contact Us

If you encounter any problems during use, or have any suggestions or feature requests for this product, please contact us. We are here to help you resolve issues promptly.