Radtel P6

Contents

Radtel P6 PoC Radios User Manual

Model: P6 | Brand: Radtel

Introduction

The Radtel P6 PoC (Push-to-Talk over Cellular) Radios are advanced two-way communication devices designed for extensive range and reliable performance. Utilizing 4G LTE networks, these radios offer virtually unlimited communication distance, making them ideal for logistics, security, and other professional applications requiring nationwide coverage. This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Radtel P6 PoC Radio.

Familiarization with the Radio

Overview of Components

Refer to the diagrams below to identify the various parts of your Radtel P6 radio.

Radtel P6 radio with numbered components (front, side, back view)
Figure 1: Radtel P6 Radio Components (Front, Side, and Back Views)

For non-visual users:

  1. Antenna
  2. PTT (Push-To-Talk) Button
  3. Side-key 1
  4. Side-key 2
  5. Battery
  6. SW/MW/LW FM antenna (Channel knob)
  7. ON/OFF volume
  8. Indicator Light
  9. Alarm Button
  10. Display screen
  11. Keypad
  12. MIC (Microphone)
  13. Speaker
  14. Ear/Mic jack
  15. Type C charging port/programmable jack
Top view of Radtel P6 radio with numbered ports and buttons
Figure 2: Top View of Radtel P6 Radio

For non-visual users:

  1. Antenna Port 1: Used for all frequency transmission and reception except short wave/middle wave/long wave/FM radio frequencies.
  2. Antenna Port 2: Used for short wave/middle wave/long wave/FM radio frequencies.
  3. Power Button/Volume Adjustment: Used to turn the device on/off and adjust the volume.
  4. Emergency Alarm Button/Customizable Button: Can be used for emergency alarms or customized functions.
  5. LED Light:
    • Green Light: Indicates the device is receiving a signal.
    • Red Light: Indicates the device is transmitting a signal.

Keypad Function

Keys Function
PTTTransmit or Exit
Alert KeyDefinable long press (L) and short press (S) functions
Side Key 1Definable long press and short press functions. Can be used as PTT-2 for transmission (disables custom function).
Side Key 2Definable long press and short press functions. Can be used as PTT-3 for transmission (disables custom function).
Menu/OK ButtonShort press to confirm or enter into menu. Long press to enter DTMF inputting (standby) or exit menu interface.
Up ArrowMove up; long press to quickly scroll up. DTMF :B
Down ArrowMove down; long press to quickly scroll down. DTMF :C
Exit/Cancel ButtonShort press: Switch ABC channels, exit the menu, and cancel the operation. DTMF :C
0Short press: Enter the number 0. Long press to definable functions, or switch scanning direction in FM RADIO mode. DTMF :0. To input Number 0 or Space Bar.
1Short press: Enter the number 1. Long press to definable functions. DTMF :1. To input Number 1/English Letters/Chinese Characters.
2-9Short press: Enter the number 2-9. Long press to definable functions. DTMF :2-9. To input Number 2-9/English Letters/Chinese Pinyin Codes.
*Short press to switch from channel frequency /channel number/channel Alias, Move the cursor in FM RADIO mode. Long press to lock the keypad. DTMF :*. Text input: Delete text.
#Short press: Switch the working mode to VFO frequency mode/channel mode/zone mode. Or switch short wave modulation in FM RADIO. Long press: Jump to the transmit frequency input menu. Or switch short wave mode in FM RADIO. DTMF :#. Text input: Enable or disable text input, switch text input method.

LCD Display

The LCD screen provides important information about the radio's status and current operations.

Close-up of Radtel P6 LCD display showing various symbols and indicators
Figure 3: LCD Display Symbols and Indicators

For non-visual users:

  1. Keyboard Lock
  2. Prompt Tone
  3. Scan
  4. RR: Talk around/TR: Reverse Frequency
  5. Multi-Frequency Standby
  6. VOX (Voice Operated Exchange)
  7. GPS (option function)
  8. Cross-Band Repeater
  9. Battery Icon
  10. Multi-PTT Enable
  11. Received Signal Strength
  12. Received Signal Field Strength Value
  13. High Power / Low Power switchable
  14. CTCSS/DCS/MUT Non-standard DCS / ENC Encrypted DCS
  15. Wide or Narrow Bandwidth
  16. FM/AM RX
  17. CH-XXXX: channel number in channel mode / ZONE-XXX: zone number in zone mode
  18. Working Frequency / Working Channel
  19. Main Frequency Area Indicator Icon
  20. Channel Name
  21. Working Frequency Range
  22. A/B/C Main Frequency Area
  23. Received Signal Meter

Setup Guide

Charging the Radio

Your two-way radio supports three charging methods:

  1. Charging with the Radio in the Charging Dock:
    • Insert the battery into the radio.
    • Place the radio into the charging dock.
    • Ensure the radio is properly seated in the charger.
  2. Charging the Battery Alone in the Charging Dock:
    • Remove the battery from the radio.
    • Insert the battery into the charging dock.
    • Make sure the battery is aligned correctly.
  3. Charging via USB-C Cable:
    • Plug a USB-C cable into the charging port on the side of the radio.
    • Connect the other end of the cable to a power adapter, computer, or power bank.

LED Indicator Status during Charging:

  • Red Light: Charging in progress.
  • Green Light: Charging complete.

Important Notes:

  • Use only the recommended charger and cables.
  • Do not charge in extreme temperatures.
  • Fully charge the battery before first use for optimal performance.
  • Do not use cell phone fast chargers to charge this radio.
Diagram illustrating the polymer lithium battery and its features
Figure 4: Polymer Lithium Battery - Low energy consumption and large capacity for continuous standby.

For non-visual users: The image shows a diagram of a polymer lithium battery, emphasizing its low energy consumption, large capacity, intelligent power-saving features, and long-lasting power for continuous standby.

Initial Configuration

  • Work Range (Basic Settings, Menu 17): Switch between 64-620MHz, 18-64MHz, and 840-1000MHz working frequency bands. After switching, the radio will restart. Ensure you replace the antenna with one that matches the selected frequency band to prevent damage.
  • Frequency Input (Basic Settings, Menu 30): Configure the device to accept 6-bit or 8-bit frequency input.
  • Initialization (Basic Settings, Menu 34): To restore the frequency data of the device to its last programmed state, navigate to this menu and confirm the initialization.
Back view of Radtel P6 radio showing SIM card slots (SIM 1, SIM 2) and a close-up of the internal SIM card area.
Figure 5: SIM Card Installation for PoC Functionality

For non-visual users: The image displays the back of the Radtel P6 radio, highlighting the SIM card compartment labeled 'SIM 1' and 'SIM 2'. A close-up shows the internal mechanism for inserting SIM cards, indicating that the device supports Push-To-Talk Over Cellular (PoC) and works with cellular 4G LTE coverage.

Operation

Basic Operation

  1. Setting Working Frequency (1.1): The device operates in three frequency ranges: 64-620 MHz, 18-64 MHz, and 840-1000 MHz. Transmission and reception for all three bands are handled via the left main antenna port. To change the frequency band, navigate to [Basic Settings] → [17 Work Range] in the menu.
  2. Frequency Input (1.2):
    • Switch to VFO Frequency Mode: Press the # key to enter VFO Frequency Mode.
    • Enter the Frequency: Use the numeric keypad to input the desired frequency (6 or 8 digits).
    • Frequency Input Settings: Navigate to [Basic Settings] → [Frequency Input 30] to select 6 or 8 bits.
  3. Repeater Frequency Input (1.3):
    • Method 1 (Offset Frequency Settings): Navigate to [CH Settings] → [16 Offset Freq] to input offset frequency, then [15 Offset Direction] for positive or negative offset.
    • Method 2 (Direct Transmit Frequency Input): In standby mode, long press the [#V/M] key to enter the [Transmit Frequency] menu. Enter the desired transmit frequency, then press OK. Configure sub-audio settings via [CH Settings].

Transmitting Signals (1.4)

  • Standard Transmission: Press the PTT key to initiate a call on the current frequency. The LED indicator will turn red.
  • Multi-PTT Mode: If enabled in [Key Definition] → [1 Multi-PTT], Side Key 1 transmits on Band B, and Side Key 2 transmits on Band C. Shortcut functions of Side Key 1 and 2 are disabled in this mode.

Receiving Signals (1.5)

When the device receives a signal on the same frequency, the LED indicator will turn green. Audio output is enabled if no sub-audio (CTC/DCS) is set, or if the received sub-audio matches the configured sub-audio on the device.

CTC/DCS Settings (1.6)

Navigate to [CH Settings] to set the sub tone CTCSS or DCS.

  • CTC/DCS (Transmit & Receive): Enables both transmit and receive CTC/DCS.
  • RX CTC/DCS (Receive Only): Accepts signals matching the set code, but transmission is unrestricted.
  • TX CTC/DCS (Transmit Only): Transmits using the set code, but receives all incoming signals without restriction.

U/V Cross-Band Repeater (1.7)

  • Activating Cross-Band Repeater Mode: Assign a button to [26 UV Repeater] or enable via [Basic Settings] → [28 UV Repeater]. Once activated, Channel C is disabled, and Channels A and B are used for cross-band repeating.
  • Monitoring Repeater Audio: Enable [29 Repeater Monitor] in [Basic Settings] to listen to repeater voice communications.

DTMF Function (1.8)

  • DTMF Encoding Input & Transmission: In standby mode, long press the Menu/OK button to enter DTMF input mode. Use the numeric keypad to input codes. Press PTT to transmit after a preset delay.
  • DTMF Decoding: When enabled, received DTMF codes are displayed on the screen.
  • DTMF Transmission in Analog Mode: Pressing a key on the keypad during analog transmission sends the corresponding DTMF code.
  • DTMF Remote Monitoring: Set a DTMF monitoring code and enable [Accept Remote Control]. Another radio sending this code will cause your device to transmit for 60 seconds, enabling remote monitoring.
  • DTMF Remote Stun/Kill/Wake: Set remote stun/kill/wake codes. Another radio can send these codes to remotely stun (disable transmit/keypad), kill (inoperable until wake code), or wake the device. Ensure a wake code is set before enabling this feature.

Text Input Function (1.9)

In the Text Input Menu:

  • # key: Switch between different input methods.
  • * key: Delete text or pinyin.
  • Number Input [123]: Use numeric keypad for numbers.
  • English Input [AB] / [abc]: Keys 2-9 for letters, 0 for space, 1 for symbols. Press a key multiple times to cycle through letters.
  • Chinese Pinyin Input [PY1] / [PY2]: Enter pinyin, use arrow keys to select characters, and Menu/OK to confirm.

FM Radio & Shortwave Receiver (2.0)

  • Defining the FM Radio Trigger: Assign a button for the FM Radio function via Key Define. Pressing it enters radio mode; PTT exits.
  • Switching Between Radio Bands: Long press the # key to switch between USW (64-108 MHz), SW (2.0-30.0 MHz), MW (520-1710 KHz), and LW (153-279 KHz).
  • Switching Demodulation Modes: Short press the # key to switch demodulation mode. USW band is fixed to FM.
  • Other bands can switch between: AM (Amplitude Modulation), USB (Upper Sideband), LSB (Lower Sideband), CW (Continuous Wave, Morse Code).
  • * Key Short Press: Switches the Input Type.
  • * Key Long Press: Enter Scan Mode.
  • Single Sideband (USB/LSB) Demodulation: Adjust BFO (Beat Frequency Oscillator) frequency for clear sound.

One-Key Frequency Measurement & Remote Sub-Audio CTCSS/DCS Decoding (2.1)

  1. Press the trigger button to enter Frequency Measurement or Remote Sub-Audio Decoding Mode.
  2. Press the * key to switch between modes.
  3. During measurement: PTT or exit key to exit. # key to switch frequency band.
  4. After measurement: Exit key to re-measure. Menu key to save to VFO channel. PTT to transmit.

Spectrum (2.2)

  1. Press the trigger button to enter Spectrum Scanning Mode. Press the * key to exit.
  2. Short press the * key to switch input fields (Scan Center Frequency, SPACE, DECAY).
  3. Press arrow keys to move the indicator cursor. The display shows Frequency, RSSI, NOISE, GLITCH.

Key Define (Menu 1.2)

This menu allows you to customize the functions of various keys on your radio. Navigate to [Key Define] to assign specific actions to short or long presses of Side Key 1, Side Key 2, the Alarm Key, and numeric keys (0-9).

For example, you can set Side Key 1 and Side Key 2 as PTT buttons (Multi PTT), or assign functions like Monitor, Power Switch, Scanning, VOX, SQ, Freq Step, Multi Standby, TX Priority, Roger Beep, FM Radio, Talkaround, Alarm, Send Single Tone, Freq Detect, CTC/DCS Scan, Spectrum, Radio Sleep, Query Status, Save CH, RX AM/FM, NOAA CH, LCD On-Off, LCD Brightness, Key LED On-Off, or UV Repeater.

Analog Settings (Menu 1.3)

This section covers various analog communication parameters:

  • SQ Level (1): 0-10 adjustable sensitivity for optimizing reception.
  • TX Start Tone (2): Customizable audio tone when power On.
  • TX End Tone (3): Customizable audio tone at end of transmitting (Roger Beep 1/2, Send Radio Name).
  • Single Tone (4): 1750Hz tone to activate repeaters.
  • VOX On-off (5), VOX TH (6), VOX Delay (7): Voice-controlled transmission settings.
  • Detect Range (8): Detects signals within specified frequency range (18-620MHz, 840-1000MHz).
  • Repeater Delay (9): Delay time for repeater use (0-2000ms).
  • MIC Gain (10): Adjusts microphone gain (0-31).
  • FM Mode SPK Gain (11): Adjusts speaker gain in FM mode (0-63).
  • FM Mode DAC Gain (12), AM Mode SPK Gain (13), AM Mode DAC Gain (14): Adjusts audio output to prevent distortion.
  • Glitch TH (15): Adjusts interference threshold (0-10).
  • DTMF Delay (16), DTMF Interval (17), DTMF Duration (18): Sets timing for DTMF signals.
  • DTMF Mode (19): Controls DTMF mode (Off, TX Start, TX End).
  • DTMF Select (20): Selects DTMF signal (DTMF-01~16).
  • DTMF Display (21): Enables/disables DTMF display.
  • DTMF TX Gain (22), DTMF RX TH (23): Adjusts transmit gain and receive threshold for DTMF signals.
  • DTMF Control (24): Controls DTMF functionality.
  • Time Calibrate (25): Enables/disables time calibration.
  • TX Voice Refresh (26), RX RSSI Refresh (27): Sets refresh rates for voice and signal strength indicators.
  • Temporary Tuning (28): Enables/disables temporary RX setup, allowing adjustment of RSSI, noise threshold, and power levels.

CH Settings (Menu 1.4)

This menu allows configuration of channel-specific parameters:

  • CTC/DCS (1), RX CTC/DCS (2), TX CTC/DCS (3): Set sub-audio type and code for the current channel.
  • TX Freq (4): Set the transmission frequency.
  • DCS Encrypt (5): Select different DCS encryption modes (Standard, Encrypt 1/2/3, Mute Code).
  • Mute Code (6): Set the mute code (00000000).
  • Band Width (7): Select bandwidth (Wide/Narrow).
  • Tail Tone (8): Turn tail tone on or off.
  • Scrambler (9): Select voice scrambling modes (Off/1~8).
  • Busy Lock (10): Control lock state, carrier matching, and CTC/DCS matching functions.
  • TX Power (11): Set transmission power (Low/Medium/High).
  • Scan Add (12): Add or remove scan channels.
  • TOT (13): Set Time-Out Timer (Off/5s~600s).
  • CH Alias (14): Customize channel aliases.
  • Offset Direction (15), Offset Freq (16): Set repeater offset direction and frequency.
  • AM/FM RX (17): Choose to receive AM or FM Modulation signals.

Zone Settings (Menu 1.5)

The device supports up to 256 zones. Enter the zone settings menu to edit zone names and select channel members using the # key.

FM Radio (Menu 1.6)

  • RX Standby: Switch on/off RX Standby.
  • CH List: Includes 128 preset radio channels. Select a channel to edit its name or set it as current.

Time Management (Menu 1.7)

  • APO (1): Turns Automatic Power Off feature on or off.
  • APO Timer (2): Sets the time interval for APO.
  • AWU (3): Enables or disables Automatic Wake-Up function.
  • AWU Timer (4): Sets the time interval for AWU.
  • System Time (5): Sets the current time on the device.

GPS (Menu 1.8)

The Radtel P6 includes GPS functionality for positioning, distance measurement, and track recording.

  • GPS Positioning: Provides current location coordinates.
  • Standalone Distance Measurement: Set a starting point, then press '#' to get current distance and direction.
  • Two RT-880G Devices: Can send GPS coordinates to each other.
  • GPS Track Recording and Querying: Record latitude and longitude manually or at intervals. View track points, distance, and direction.
  • GPS On-off: Turn GPS background reception on or off.
  • GPS Baudrate: Set the baud rate of the GPS module (default 9600).
  • UTC Zone: Set the time zone.
  • PC Monitor: Upload GPS data to PC via serial port.
  • Coordinate Type, Speed Unit: Set display format and units.
  • Distance Unit, Altitude Unit, Fixed Latitude/Longitude/Altitude: Configure display units and fixed coordinates.
  • Mileage, Mileage Type, Clear Mileage: Track and manage total mileage.
  • Manual Record, GPS Auto Record, GPS Record Time: Manually or automatically record GPS information.
  • Query Track, Clear Track: View and clear recorded tracks.

APRS (Menu 1.9)

The Automatic Packet Reporting System (APRS) allows for transmitting and decoding real-time digital information.

  • APRS Hardware Encoding/Decoding: Transmit and decode APRS data, including GPS coordinates.
  • APRS Data Transmission to PC: Report APRS data to a PC via a programming cable.
  • APRS On-off: Turn the APRS function on or off.
  • Station Mode: Choose dynamic GPS coordinates or preset fixed coordinates.
  • Beacon Setup, Call Sign, SSID, Symbol Table, Symbol, Comment: Configure beacon settings and identification.
  • MIC-E On-off, MIC-E Mode: Control MIC-E compressed data.
  • Path 1, Path 1 Count, Path 2, Path 2 Count: Configure forwarding paths.
  • TX Voltage, TX Star Count, TX Mileage: Add local voltage, satellite count, and mileage to APRS data.
  • Beacon Mode, PTT After, Smart Mode, Time Mode, Timed Time(S), Queue Mode, Queue Interval: Configure beacon transmission modes and intervals.
  • DIGI SETUP, DIGI REP CH: Digital forwarding settings and channel.
  • DIGI1 On/Name, DIGI2 On/Name: Digital forwarding switches and names.
  • Wait Before REP: Waiting time for forwarding received APRS data.
  • Remote Password: Forwarding remote password.
  • APRS RX CH, APRS TX CH: Set receive and transmit channels for APRS.
  • TX Level, RX Level: APRS transmission and reception gain levels.
  • Demod Tone: APRS decoding prompt tone.
  • TX Data Upload, RX Data Upload: Report APRS data to PC.
  • Beacon Pop-up: Beacon data interface pops up after successful decoding.
  • PTT Priority: Whether to send APRS data or start a call after triggering PTT.
  • PTT Delay: Delay time for PTT to send APRS.
  • Beacon List, Beacon List CLR: Store and clear received beacon lists.
  • APRS Init: Initialize all APRS related data.

Maintenance

General Care

  • To clean the equipment and/or the battery charger, ensure they are OFF and use an antistatic cloth (preferably) or a humid (not wet) cloth.
  • Do not spray any liquid or product directly onto the transceiver, battery pack, or charger. Never use polish, home products, detergents, alcohol, or solvents for cleaning.
  • Avoid using a dry cloth for cleaning, as it could cause static shock.
  • Do not expose the equipment or battery charger directly to water or prolonged sunlight.
  • Avoid placing the device near heat sources (radiators, etc.), in dusty or dirty environments, or near fire or explosive conditions.
  • Do not store the transceiver inside a vehicle parked in direct sunlight.
  • Avoid humidity condensation. If condensation occurs, clean with a dry cloth and allow to dry completely before use.

Battery Care

  • Always use only the recommended charger and cables.
  • Fully charge the battery before first use to ensure optimal performance and longevity.
  • Do not charge in extreme temperatures.
  • There is an explosion risk if an incompatible battery pack is used as a replacement.

User Tips

  • Audio Optimization: Ensure audio settings are optimized for clear communication. Adjust the speaker gain (FM Mode SPK Gain) and DAC gain (FM Mode DAC Gain, AM Mode DAC Gain) to prevent distortion.
  • Earpiece Compatibility: The radio features an Ear/Mic jack (component 14 in the diagram) for connecting an earpiece or external microphone. Ensure your earpiece is compatible with this port.
  • PoC Service Registration: If using the Push-to-Talk over Cellular (PoC) functionality, verify that your radio is properly registered with the global PTT platform or any required network services.
  • Regional Compatibility: Before operating the radio in a new region, such as Mexico, check local regulations and frequency allocations to ensure compliance and proper functionality.
  • Network Connectivity: If you encounter an "Anomaly network problem" message, check your SIM card, cellular signal strength, and network settings to ensure stable 4G LTE connectivity.

Troubleshooting Guide

Problem Possible Cause Solution
No power onBattery is dead or not inserted properlyCheck battery charge and connection
No TransmissionPTT (Push-To-Talk) button not pressed or faultyEnsure PTT is pressed; check for damage
Poor Audio QualityWeak signal or interferenceMove to a clear area; adjust antenna
Short Battery LifeOld battery or high power usageReplace battery; use power-saving mode
Cannot Receive SignalWrong channel or squelch level setVerify channel settings; adjust squelch
Distorted SoundVolume too high or speaker cloggedLower volume; clean speaker grille
OverheatingProlonged transmission or faulty unitAllow cooldown; check ventilation
Stuck in One ChannelLock feature enabledDisable channel lock function
The radio keeps transmittingVOX may be turned on or the squelch level is too sensitiveTurn off VOX or adjust squelch level

Note: If the above solutions do not resolve your problems, please contact technical support via email or live chat.

Technical Specifications

General
RadioFM 64-108MHz, SW 2.3-30MHz, MW 520-1710KHz, LW 153-279KHz
Frequency Range (RX)18-620MHz, 840-1000MHz
Frequency Range (TX)18-32MHz, 136-174MHz, 400-520MHz
Channel Capacity1024 Channels + 3*VFO Channels
Channel Spacing (W/N)Analog: 25kHz/12.5kHz, Digital: 12.5K
Voltage7.4V DC
Working ModeSame frequency simplex, different frequency simplex
AntennaRemovable Antenna
Frequency Stability±2.5ppm
Working Temperature-20°C ~ +60°C
Dimensions149 * 64 * 37 mm
WeightAbout 307g
Receiving Part
Modulation ModeF3E
Maximum Frequency deviation (W/N)≤5KHz / ≤2.5KHz
Output Power (UHF/VHF)<10W
TX Current≤2500mA
Transmitting Part
Sensitivity (W/N)0.22μV/0.25μV, 12dB SINAD
Inter modulation (W/N)65dB/60dB
Audio Distortion<5%
Audio Output Power<1W (16Ω)
RX Current≤350mA
Standby current≤100mA

Note: The above specifications may change due to technical improvement without prior notice or liability.

Safety & General Information

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Safety Information for Radios (RF Exposure)

Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless devices.

Important FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna. Unauthorized antennas, modifications or attachments could damage the transmitter and may violate FCC regulations.

Normal Position: Hold the transmitter approximately 25 mm from your face and speak in a normal voice, with the antenna pointed up and away.

Waste Disposal

All articles displaying the symbol of a crossed-out wheeled bin on the body, packaging, or instruction manual must not be thrown away into normal disposal bins but brought to specialized waste disposal centers. Here, the various materials will be divided by characteristics and recycled, thus making an important contribution to environmental protection.

Compliance with RF Exposure Standards

This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection.

Radio License

Governments classify radios, and most classified walkie-talkies require a local government license for operation. For detailed classification and use of your two radios, please contact the local government radio management departments.

CE Marking

The CE marking means: Hereby, Xiamen Radtel Electronics Co.,Ltd declares that the radio equipment type is in compliance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available in this manual or at the following internet address: www.radtel.com

Local Government Regulations

When two-way radios are used as a consequence of employment, Local Government Regulations require users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Radtel two-way radio has an RF Exposure Product Label. Also, your Radtel user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.

General Safety Precautions

  • Always use the ON/OFF control to power the device on or off.
  • Install the battery pack and accessories correctly as indicated in this manual.
  • Never transmit with a damaged antenna.
  • Do not transmit for extended periods.
  • Avoid touching the antenna with your hand or any part of your body when the equipment is transmitting.
  • In case of malfunction (scent of burning, smoke), immediately turn off the transceiver or disconnect the battery charger from the AC wall outlet and consult Technical Service.
  • Do not insert any object into the speaker holes or transceiver connectors.
  • If using an external headset, reduce the volume to the lowest possible level to avoid very high audio levels.
  • If the transceiver causes interference with other electronic equipment (video recorder, DVD, radio, TV), move it away from the affected apparatus.
  • Do not use this transceiver near other electronic equipment, especially medical equipment, as it may cause interference.
  • Turn off and do not use the equipment in restricted or prohibited areas (e.g., coal gas areas, explosion atmospheres, on board airships, airports).
  • Do not operate this transceiver while driving a vehicle; use hands-free systems ("VOX" function) and respect traffic laws.
  • The use of non-compatible accessories may limit the transceiver's operation and invalidate the guarantee.

Warranty and Support

For warranty information and technical support, please refer to the official Radtel website or contact your authorized dealer. For a comprehensive user manual in PDF format, please refer to the following link: Radtel P6 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.