TESSAN 633FC

Contents

TESSAN Universal Travel Adapter (Model: 633FC) - Instruction Manual

Comprehensive guide for setup, operation, maintenance, and troubleshooting.

1. Product Overview

The TESSAN Universal Travel Adapter (Model 633FC) is an all-in-one solution designed to power and charge your devices in over 150 countries. It features a universal AC outlet, three USB-A ports, and one USB-C port, allowing you to charge up to five devices simultaneously.

TESSAN Universal Travel Adapter with labels for USB ports and plug sliders

Figure 1: TESSAN Universal Travel Adapter (Model 633FC)

Package Contents:

  • 1 x TESSAN Universal Travel Adapter
  • 1 x User Manual (this document)

2. Safety Information

  • This adapter does NOT convert voltage. Ensure your devices are compatible with the local voltage (100-250V).
  • Do not use with high-power appliances exceeding 2500W (e.g., hair dryers, curling irons, electric kettles).
  • For indoor use only. Do not expose to liquids, moisture, or extreme temperatures.
  • Keep out of reach of children.
  • Do not attempt to disassemble or modify the adapter.

3. Setup and Plug Selection

The adapter features retractable plugs for various regions. To select the correct plug:

  1. Identify the required plug type for your destination (US/AUS, UK, or EU).
  2. Slide the corresponding button on the side of the adapter forward until the plug prongs fully extend and lock into place.
  3. To retract a plug, slide the button back. Ensure only one plug type is extended at a time.
Close-up views of the adapter showing EU, UK, AUS, and USA plug configurations

Figure 2: Plug Configurations (EU, UK, AUS, USA)

4. Operating Instructions

4.1 Using the AC Outlet

  1. Extend the appropriate plug for your wall socket.
  2. Plug the adapter into the wall outlet.
  3. Insert your device's power plug into the universal AC socket on the front of the adapter.
  4. Ensure your device's power consumption does not exceed 2500W.

4.2 Using the USB Ports

The adapter features 3 USB-A ports and 1 USB-C port for charging mobile devices.

  1. Connect your device to any of the USB-A or USB-C ports using a compatible charging cable.
  2. The LED indicator on the adapter will illuminate when power is supplied.
  3. The USB-C port provides up to 15W (5V/3A) for faster charging, while USB-A ports provide up to 12W (5V/2.4A). The total USB output is 17W.
Adapter in use, showing USB-C and USB-A charging speeds

Figure 3: USB Charging Capabilities (USB-C 15W/3A, USB-A 12W/2.4A)

4.3 Simultaneous Charging (5-in-1 Design)

You can use the AC outlet, three USB-A ports, and one USB-C port simultaneously to power and charge up to five devices. Ensure the total power consumption does not exceed 2500W.

Illustration of the 5-in-1 design, showing the adapter charging multiple devices simultaneously

Figure 4: 5-in-1 Charging Capability

5. Maintenance

5.1 Fuse Replacement

The adapter is equipped with a 10A double fuse for overload protection. If the adapter stops working, the fuse may have blown. A spare fuse is included.

  1. Unplug the adapter from the wall outlet and disconnect all devices.
  2. Locate the fuse compartment on the side of the adapter (usually marked with "FUSE").
  3. Use a small flat-head screwdriver or coin to gently pry open the fuse compartment.
  4. Remove the blown fuse and replace it with the spare 10A fuse.
  5. Close the fuse compartment securely.
Adapter showing the location of the main fuse and a spare fuse

Figure 5: Fuse Location and Replacement (Main Fuse and Spare Fuse)

5.2 Cleaning and Storage

  • Ensure the adapter is unplugged and all devices are disconnected before cleaning.
  • Wipe the adapter with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Store the adapter in a cool, dry place when not in use.

6. Troubleshooting

  • Adapter not working / No power:
    • Check if the adapter is securely plugged into the wall outlet.
    • Verify that the wall outlet is functional.
    • Check and replace the fuse if it is blown (refer to Section 5.1).
    • Ensure the total power of connected devices does not exceed 2500W, which might trigger the overload protection.
  • Device not charging via USB:
    • Ensure the USB cable is properly connected to both the adapter and your device.
    • Try a different USB port or cable.
    • Verify that your device is compatible with USB charging.

7. Specifications

FeatureSpecification
Model Number633FC
Rated Power2500W Max
Rated Current10A Max
Rated Voltage100-250V AC
USB-C Output5V/3A (15W Max)
USB-A Output5V/2.4A (12W Max per port)
Total USB Output5V/3.4A (17W Max)
USB Ports3 x USB-A, 1 x USB-C
AC Outlets1 x Universal AC Socket
GroundingNon-Grounding
Overload ProtectionYes (10A Double Fuse)
Synchronous RectificationYes
Voltage Range (Internal)50-1000V DC, 75-1000V AC
Dimensions (L x W x H)5.5cm x 5.35cm x 7.15cm (approx.)
CertificationCE
Compatible PlugsUS/AUS, UK, EU (including IT, FR)
Dimensions of the adapter (5.5cm x 5.35cm x 7.15cm) compared to a soda can

Figure 6: Adapter Dimensions

8. User Tips

  • Always check the voltage requirements of your devices before plugging them into the adapter. This adapter does not convert voltage.
  • For optimal charging, use original or certified charging cables with your devices.
  • When traveling, ensure the adapter's plug type is correctly selected and fully extended for a secure connection.

9. Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller directly through your purchase platform. Please have your order number and product model (633FC) ready for faster assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.