1. Product Overview
The KAVERY Oil Filter, OEM part number 06J 115 403C, is designed to effectively filter contaminants from your engine oil, ensuring optimal engine performance and longevity. This filter is engineered for consistent quality, genuine performance, and good permeability.
Compatibility: This oil filter is compatible with various Volkswagen and Audi models, including but not limited to VW Beetle, CC, Jetta, Golf, Passat, Tiguan, and AUDI A4, A6, Q5, A3, TT.

Figure 1: KAVERY Oil Filter (OEM: 06J 115 403C) highlighting its quality attributes.
Video 1: A 15-second visual overview of the KAVERY Oil Filter, showcasing its design from all angles.
2. Setup and Installation
Proper installation is crucial for the effective operation of your oil filter. Always ensure the engine is cool before beginning the installation process. Refer to your vehicle's service manual for specific torque specifications and additional safety precautions.
Installation Steps:
- Prepare the Gasket: Apply a thin film of clean engine oil to the rubber gasket of the new oil filter. This helps ensure a proper seal.
- Position the Filter: Carefully screw the new oil filter onto the engine's oil filter housing.
- Hand Tighten: Continue screwing the filter until the gasket makes firm contact with the mounting surface.
- Final Tighten: Once contact is made, tighten the filter an additional 3/4 of a turn by hand or with an appropriate oil filter wrench. Do not overtighten.
- Refill Oil: Fill the engine with the recommended type and amount of engine oil, up to the normal level indicated on your dipstick.
- Check for Leaks: Start the engine and let it run for a few minutes. Carefully check around the oil filter for any signs of oil leaks. If leaks are present, turn off the engine and retighten the filter slightly if necessary.

Figure 2: Installation instructions printed directly on the oil filter for quick reference.
3. Operating Instructions
The oil filter operates continuously whenever the engine is running. Its function is to remove harmful particles and contaminants from the engine oil, preventing wear and tear on internal engine components. No direct user interaction is required during operation.
4. Maintenance
The primary maintenance for an oil filter is its regular replacement. Always follow your vehicle manufacturer's recommended oil change intervals, which typically include replacing the oil filter at the same time. This ensures that your engine oil remains clean and effective.
5. Troubleshooting
Common Issues and Solutions:
- Oil Leaks After Installation:
- Ensure the old gasket was completely removed from the engine block.
- Verify the new gasket is properly seated and not pinched.
- Confirm the filter is tightened correctly (hand-tight plus 3/4 turn). Do not overtighten.
- Check for cracks in the oil filter housing or filter itself (rare).
- Filter Does Not Fit:
- Double-check the OEM part number (06J 115 403C) against your vehicle's requirements.
- Verify compatibility with your specific vehicle make, model, and year.
- Ensure you have the correct filter type (e.g., spin-on vs. cartridge).
- Engine Oil Pressure Warning Light:
- This can indicate a severe issue. Stop the engine immediately.
- Check oil level.
- Inspect the filter for proper installation and leaks.
- If the light persists after checking, consult a qualified mechanic.
6. Specifications
| Attribute | Detail |
| Brand | KAVERY |
| OEM NO. | 06J 115 403C |
| Manufacturer Part Number | 06 J 115 403C |
| Origin | Mainland China |
| Country/Region of Manufacture | China |
| Package Dimensions (L x W x H) | 15 cm x 9 cm x 8 cm |
| Package Weight | 0.45 kg |
7. User Tips
- Verify Compatibility: Before purchasing and installing, always confirm that the OEM part number 06J 115 403C is the correct oil filter for your specific vehicle's make, model, engine type, and year.
- Proper Disposal: Always dispose of used oil filters and engine oil responsibly according to local environmental regulations.
- Consult Manual: For detailed vehicle-specific instructions, always refer to your car's official service manual.
8. Warranty and Support
This KAVERY oil filter comes with a 2-year or 40,000-kilometer guarantee, whichever comes first. This warranty covers manufacturing defects under normal use conditions.

Figure 3: Warranty information for KAVERY parts.
For further assistance or inquiries, please refer to the official seller's support channels. A general user manual in PDF format is also available for reference: Download User Manual (PDF).