MYOSLIM EMS Body Sculpt Machine with 360° RF Roller

1. Introduction

Thank you for purchasing this instrument! This user's manual sets out the working principle, precautions, operation, and maintenance of the instrument. To ensure safe and effective use, please read this user manual carefully before operating the device.

This instrument is a two-in-one body shaping device, primarily composed of a main machine, an EMS handle, and an inner ball roller handle. It is designed for general human body shaping.

1.1 Safety and Responsibility

Our company is responsible for the safety and reliability of the instrument under the following conditions:

1. Installation, reorganization, modification, and maintenance are carried out by professionals designated or authorized by the company.
2. The electrical equipment connected to the instrument meets the technical parameters specified in this user manual.
3. Operation is performed strictly according to this user manual.

Using this instrument for functions other than those specified, or failure to follow operation methods, may result in malfunction or endanger human health. In such cases, all consequences will be borne by the user, and our company will not bear any responsibility.

The contents of this manual are subject to change without prior notice.

2. Working Principle

The MYOSLIM EMS Body Sculpt Machine combines EMS (Electrical Muscle Stimulation) with RF (Radio Frequency) and a 360° rotating inner ball roller for comprehensive body shaping and skin tightening.

2.1 EMS Handle in Body Shaping

The EMS handle utilizes HI-EMT (High Energy Focused Electromagnetic Waves) technology. This technology induces continuous muscle expansion and contraction, performing extreme training. This process deeply remodels the internal structure of muscles, leading to the growth of myofibrils (muscle enlargement) and the generation of new protein chains and muscle fibers (muscle hyperplasia), thereby increasing muscle density and volume.

The 100% extreme muscle contraction triggered by HI-EMT technology can also break down a large amount of fat. Fatty acids are decomposed and released from triglycerides, accumulating in adipocytes. High levels of fatty acids cause fat cells to die and be naturally excreted by the body's metabolism within a few weeks.

2.2 Inner Ball Roller Handle in Body Shaping

The inner ball roller handle employs a non-invasive method of mechanical compression micro-vibration combined with infrared treatment. The principle involves a ball rotating 360° along its axis, generating compression micro-vibration. As the ball rotates and exerts pressure on the skin, it creates a "pulsating compression" effect. This action involves continuous push-pull and kneading motions, gently pulling the skin tissue without squeezing or damaging it.

Infrared therapy promotes cell metabolism, enhances oxygen-blood combination, reduces cellulite, and alleviates muscle stiffness and soreness, ultimately promoting cell activity and reshaping the body.

2.3 Synergistic Effects of Inner Ball Roller Handle

The inner ball roller handle offers several synergistic benefits:

• Vascular Influence: It balances hydrostatic and inflation pressure, promoting internal metabolism and improving hemodynamic exchange. This helps reduce water stagnation and edema in tissue.
• Drainage Effect: By repeatedly pushing and kneading edematous areas, it helps move stagnant body fluid into circulation, aiding in the removal of toxic substances.
• Muscle Adjustment & Balance: Mechanical rotation, slight pressing, and kneading promote deep muscle relaxation, reduce fatigue, and alleviate pain. It also simulates muscle relaxation for the face, improves blood circulation, enhances blood oxygen binding, and removes toxins.

Figure 2.3.1: Roller Working Principle showing penetration depths into different tissue layers.

Figure 2.3.2: Drop-resistant dual handles and their application on skin layers.

Figure 2.3.3: Illustration of lymphatic drainage and fat reduction.

3. Product Features

• 3-in-1 Technology: Combines EMS, Radio Frequency, and Micro-vibration for enhanced shaping, weight loss, muscle relaxation, and skin tightening.
• Dual-Control: EMS RF A and EMS RF B handles can operate together or independently. Both large and small inner ball rollers can be used simultaneously or separately.
• 360° Intelligent Rotating Drum Handle: Provides a stable, safe, and continuous long-term operating mode.
• Mechanical Handle: Allows for precise positioning and pressure level control.
• Versatile Application: Suitable for use on various body parts including the face, back, buttocks, arms, abdomen, hips, and legs.
• LED Display on Handle: Shows current speed for easy monitoring.
• Start/Pause Button: Convenient control directly on the roller handle.
• User-Friendly: No need for excessive manual pressure; operation is simple and safe.

Figure 3.1: Face & Neck Roller and Body Roller.

Figure 3.2: Application areas for full body care.

4. Application Positions

The inner ball roller handle can be applied to various parts of the body for targeted treatment:

Figure 4.1: Application positions for the inner ball roller handle.

• Face: For facial contouring and skin tightening.
• Neck: To improve neck lines and skin elasticity.
• Back: For muscle relaxation and shaping.
• Loin: To target fat reduction and contouring.
• Arm: For toning and firming arm muscles.
• Belly: To reduce abdominal fat and tighten skin.
• Buttock: For lifting and shaping the glutes.
• Thigh: To reduce cellulite and firm thigh areas.
• Calf: For muscle relaxation and shaping.

5. Setup

5.1 Unpacking and Component Identification

Carefully unpack the machine and identify all components using the packing list provided in Section 9. Ensure all parts are present and undamaged.

Figure 5.1.1: Front view of the instrument.

Figure 5.1.2: Back view of the instrument.

5.2 Connecting Handles and Power

1. Connect the EMS handles and roller handles to their respective ports on the back of the main machine.
2. Ensure the main power switch is OFF.
3. Connect the power cable to the machine's power plug port and then to a suitable power outlet.
4. Turn on the main power switch.

5.3 Initial Power On and Screen Navigation

Upon powering on, the machine will display a startup screen. The main interface allows you to select between "EMS" or "WHEELS" (roller) functions.

6. Operating Instructions

6.1 Function Selection

From the main interface, tap on either "EMS" or "WHEELS" to enter the corresponding operation mode.

Figure 6.1.1: Newly Upgraded HD Touch Screen Interface.

6.2 EMS Interface Operation

Before operation, ensure the EMS handle is taken out from its hanger. Use a strap to fix the EMS handle to the desired treatment area on the customer's body.

Note: All handles can only be operated by professional operators.

Caution: Do not use over the heart area, head area, or on patients with implants.

6.2.1 Easy Mode (Pattern 1)

Select "Pattern 1" for a pre-set easy mode. Adjust energy and time parameters as needed. The EMS handle will start working according to the set parameters.

6.2.2 Customized Mode (Pattern 2)

Select "Pattern 2" for more customized treatment. You can set training type, gender, position, and age according to the user's needs. The system will automatically return to the parameter setting interface, and the EMS handle will begin operation. The EMS handle will automatically stop and provide a sound prompt when the set time expires.

Note: During EMS handle operation, you can adjust energy and time parameters after pausing the treatment.

6.2.3 EMS Parameter Controls

6.3 WHEELS (Roller) Interface Operation

From the "Function Selection" screen, select "WHEELS". You can then choose between the "Big wheel" or "Small wheel" handle types based on the customer's requirements and the treatment area.

6.3.1 Roller Handle Parameter Controls

7. Specifications

7.1 Main Machine Technical Parameters

7.2 EMS Handle Parameters

7.3 Roller Handle Parameters

8. Maintenance

8.1 Daily Inspection

• Check instruments and components regularly for any visible damage or wear.
• Regularly check whether the connection between the power socket and the grounding wire is reliable.

8.2 Cleaning

• Clean the instrument regularly to ensure sanitary conditions and normal operation.
• Before cleaning, turn off the power of the instrument. You can wipe the equipment shell with a wet cloth, soapy water, or neutral detergent.
• Do not clean internal circuits.

8.3 Replacing the Fuse

• When replacing the fuse, to prevent electric shock, turn off the power supply and unplug the instrument.

9. Troubleshooting

10. Storage and Transportation

10.1 Storage

The instrument shall be stored in its original packing box, in a well-ventilated room, with an ambient temperature of -10°C to 40°C and relative humidity of no more than 93%. It should not be placed near harmful gases, inflammable and explosive substances, or corrosive gases.

10.2 Transportation

The instruments, in their packaging, are suitable for road, railway, air, and water transportation. During loading, unloading, and transportation, serious vibration should be avoided, and the instrument should be protected from moisture. It should not be mixed with flammable or corrosive substances.

11. Packing List

Serial	Name	Quantity	Picture
1	Host	1 set
2	EMS handle	2
3	Roller handle	Big*1, Small*1
4	7*100CM belt	2
5	Abdominal Muscle Piece and Connecting Line	1
6	Power cable	1
7	Electronic manual	1 copy

12. User Tips

• Stay Hydrated: Drink plenty of water before and after sessions to support your body's natural processes.
• Listen to Your Body: Start with lower intensity settings and gradually increase them as your body adapts. Do not exceed your comfort level.
• Consistency is Key: Regular use according to the recommended schedule will yield the best results.
• Proper Positioning: Ensure handles are correctly positioned and secured with straps for effective and safe treatment.
• Avoid Heavy Meals: Do not use the device immediately after a heavy meal. Wait at least one hour.
• Remove Metal Jewelry: Always remove any metal jewelry before using the instrument.
• Post-Treatment Care: Strengthen moisturizing and sun protection after use. Avoid spicy food and hot springs/saunas for three days post-treatment.

13. Warranty and Support

13.1 Warranty Period

• The mainframe of this instrument is covered by a 1-year warranty from the date of receipt (excluding fragile parts and other non-warranty parts or expiration of the warranty period).
• Accessories have a 3-month warranty (note: non-human damage).
• If the instrument is damaged and needs repair within six months of purchase, the company will cover all freight costs. For repairs between six months and one year, freight costs will be shared equally between the buyer and the company. After one year, the buyer bears all freight costs.

13.2 Exclusions from Free Warranty Service

Free warranty service is not provided for failures caused by personal reasons, including:

• Faults caused by unauthorized disassembly and modification of this product.
• Failure caused by accidental fall.
• Failure caused by lack of reasonable maintenance.
• Failing to follow the correct instructions in this manual.

13.3 After-Sales Support

• 1-on-1 Video Training: We provide professional instruction manuals and video training materials for quick self-learning. For personalized needs, we also offer 1-on-1 video call training to ensure you master machine operation with ease.
• Free After-Sales Support: Our professional technical team provides complimentary after-sales service.

If you have questions, need services, or require further information, please contact our company directly.