MOES WT601

Contents

MOES Tuya WiFi Smart Water Timer

Model: WT601 - Instruction Manual

Home, Smart Moes Home

1. Product Introduction

The MOES Smart Wi-Fi Water Timer is designed to modernize your watering system. Powered by four AA batteries, it offers easy installation and remote programming capabilities. Utilize the mobile application to set custom watering schedules and irrigation durations. This smart timer also tracks water usage and provides historical watering data, helping you manage consumption and save on water bills.

MOES WiFi Water Timer with key features highlighted
The MOES WiFi Water Timer features a built-in water flow meter, IP65 waterproof rating, brass inlet & outlet, and a maximum water flow of 35 L/min. It supports APP remote control, multiple watering modes, watering delay, child lock, 15-day hourly weather forecast, watering history records, and voice control via Alexa and Google Assistant.

Key features include:

  • APP Remote Control
  • Multiple Watering Modes
  • Watering Delay Function
  • Easy Installation
  • Child Lock
  • 15-Day Hourly Weather Forecast Integration
  • Watering History Records
  • Voice Control (Alexa, Google Assistant)

2. Important Notice & Safety Guidelines

  • For outdoor use only. Placing the timer in a shaded outdoor area can extend its lifespan.
  • Hand-tighten only. Using tools to tighten may damage the timer.
  • Do not allow the timer to freeze. Freezing temperatures may permanently damage the device.
  • Before use, check the filter washer. Clean or replace it if damaged to prevent malfunctions caused by clogged filters.
  • This device is intended for outdoor irrigation with cold water only.
  • When replacing batteries, ensure the battery compartment is completely dry to prevent damage.
Comparison of weatherproof performance between MOES timer and others
The MOES water timer is designed for stable usage with superior weatherproof performance compared to other models.

3. Technical Specifications

ModelWT601
Power Supply4 x LR6/AA (1.5V) alkaline batteries
Wi-Fi802.11b/g/n (2.4GHz)
Wi-Fi Connection Range200m+ (open air)
Working Water Pressure0.03 MPa - 0.9 MPa (4.35 psi - 130.53 psi)
Maximum Flow Rate35 L/min
Operating Temperature1°C - 60°C
Waterproof LevelIP65
Dimensions (W x H x D)175 mm x 78 mm x 43.6 mm
Weight298 g (excluding battery)
CertificationCE/FCC/RoHS
Hose Tap ConnectionNH 3/4" Thread, BSP G3/4" Thread
Comparison of water flow rate between MOES timer and others
The MOES water timer provides a powerful water flow of 35 L/min, ensuring efficient irrigation.
Diagram showing battery life of up to 730 days
The device boasts an impressive battery life of up to 2 years (730 days). Note: AA batteries are not included.
MOES water timer demonstrating IP65 waterproof and durable design
With an IP65 waterproof rating, the MOES water timer is durable and resistant to water exposure.

4. Product Description & Parts

Familiarize yourself with the components of your smart water timer:

Diagram of MOES water timer with labeled parts
Detailed view of the MOES water timer, highlighting its various parts and connections, including the US NH 3/4" Thread.
  • 1/2" Adapter (Optional): For smaller hose connections.
  • Hose Connection Input 3/4" Thread: Main water inlet, includes an internal filter screen.
  • Filter: Located within the input connection to prevent debris from entering.
  • LED Indicator Light: Provides status feedback.
  • Manual Button: For local control of watering and device functions.
  • Battery Cover: Protects the battery compartment.
  • Battery Compartment: Houses four AA/LR6 batteries.
  • Output: 3/4" Thread: Water outlet connection.
  • Quick Connector (Optional): For easy attachment to hoses.
  • Cover Groove: Design element for protection and aesthetics.

5. Setup & App Connection

5.1. Download the MOES App

The MOES App offers enhanced compatibility and features, including Siri, widget, and scene recommendations. While Tuya Smart/Smart Life App still works, the MOES App is highly recommended.

Scan the QR codes below or search for "MOES" in your app store:

QR code for Google Play Store
Download on Google Play
QR code for Apple App Store
Download on the App Store

For a detailed electronic manual, you can also refer to the User Manual PDF.

5.2. Registration or Log In

  1. Download and open the "MOES" Application.
  2. Enter the Register/Login interface. Tap "Register" to create an account by entering your phone number to receive a verification code and then setting a password.
  3. If you already have a MOES account, choose "Log in".

5.3. Network Connection Requirements

Before connecting, ensure the following:

  • Your mobile device's Bluetooth and Wi-Fi are turned on.
  • Your mobile device is connected to a 2.4GHz Wi-Fi network.
  • Your mobile device's operating system allows Bluetooth functionality for the app.

5.4. Steps for Connecting the APP to the Device

  1. Open the App homepage and click the "+" icon in the top right corner, then select "Add Device".
  2. Press and hold the manual button on the device for 3 seconds until the indicator light flashes yellow. This indicates the device has entered pairing mode.
  3. App screenshot showing 'Add Device' and diagram of holding device button for 3 seconds
    Step-by-step visual guide for initiating device pairing via the app and device button.
  4. The system will automatically search for and display the device in network configuration mode. Click to add the device.
  5. Select your 2.4GHz Wi-Fi network and enter the password, then click "Next".
  6. Wait for a moment while the device is being added. Once complete, click "Done" to finish the setup.
  7. App screenshots showing device discovery and completion of setup
    App interface showing device discovery and the final 'Done' step after successful pairing.

6. Operating Instructions

6.1. Manual Watering (Default 10 minutes)

The manual watering function allows for immediate irrigation when needed outside of scheduled times. The default duration is 10 minutes, which can be customized via the app.

  • To Start: When the water timer is not watering, press the button once. The LED indicator will turn green for 3 seconds, then watering begins.
  • To Stop: During watering, press the button once. The LED indicator will turn red for 3 seconds, then watering stops.
Diagram showing how to start and stop manual watering
Visual guide for starting and stopping manual watering using the device button.

Important Notes:

  • If the button press does not trigger the indicator light, please check the battery level.
  • To customize the watering duration, adjust it anytime on the settings page of the app.

6.2. Child Lock

When enabled, the child lock function prevents accidental touches on the device's buttons that could cause incorrect operations.

Important Notes:

  • The device only supports disabling the child lock function locally. To enable the child lock function, please use the app.
  • To Disable: When the child lock is enabled, press and hold the button for 3 seconds until the indicator light flashes green. This will disable the child lock function.
Diagram showing how to disable child lock
Instructions for disabling the child lock by pressing and holding the button until the indicator flashes green.

6.3. Restore Factory Settings

To restore the device to its factory settings:

  • Press and hold the button for 10 seconds until the LED indicator flashes red, green, and yellow alternately. The factory reset will then be complete.
Diagram showing how to restore factory settings
Visual guide for performing a factory reset by holding the button for 10 seconds until the LED flashes multiple colors.

Important Notes:

  • Restoring factory settings will delete all configurations except for the network settings. This action cannot be undone.
  • This function cannot be used while the Child Lock is enabled.

6.4. Smart Schedule & Remote Control

Utilize the MOES App to create smart watering schedules and control your device remotely.

App interface for creating smart schedules and remote control
The MOES App allows users to create detailed watering schedules, including start/end times, duration, and cycle & soak modes for improved efficiency.

6.5. Voice Control

The MOES Smart Water Timer is compatible with Amazon Alexa and Google Home for convenient voice control.

Amazon Alexa CommandGoogle Home Command
"Alexa, open device_name""Hey Google, open the device_name"
"Alexa, close device_name""Hey Google, close the device_name"
"Alexa, is the device_name open?"N/A
"Alexa, pause device_name"N/A
"Alexa, resume device_name"N/A
"Alexa, what's the device_name battery level?"N/A

Important Notes:

  • When activating the device using voice commands, the system will automatically water for the preset duration. You can adjust the default settings on the settings page in the app (Default watering duration: 10 minutes; Default watering delay (rain delay): 24 hours).
  • "device_name" refers to the default device name and can be customized as needed in the app.
  • "Pause device_name" is used to enable the watering delay (rain delay) feature, while "Resume device_name" is used to disable the watering delay (rain delay) feature.

7. Maintenance

  • Filter Cleaning: Regularly check the internal filter screen at the hose connection input. If it appears clogged with debris, clean it to maintain optimal water pressure and prevent malfunctions. Replace the filter washer if it is damaged.
  • Battery Replacement: Replace the four AA batteries when necessary to ensure proper functioning. Always ensure the battery compartment is completely dry before inserting new batteries.
  • Winterization: To prevent permanent damage, ensure the timer does not freeze during cold weather. Disconnect and store indoors if temperatures are expected to drop below freezing.
  • General Cleaning: Wipe the exterior of the device with a damp cloth as needed. Do not use harsh chemicals or abrasive cleaners.

8. Common Problems & Troubleshooting

8.1. After installing batteries, long-pressing the button shows no response

  • Check if new 4 x LR6/AA (1.5V) alkaline batteries are installed.
  • Verify batteries are installed with correct +/- polarity.

8.2. Hose quick connector leaks water

  • Check if the pipe connection is loose; tighten if necessary.
  • Check the connector's rubber ring. If it is worn or deformed, replace it.
  • Verify if the pipe body is cracked or visibly aged; replace if necessary.

8.3. Irrigation timer doesn't open/close at scheduled times

  • Check if the device has historical data records. The battery level might be too low.
  • If not, check if the corresponding schedule program for this time period is activated in the app.
  • If device settings check out normal, inspect the water supply (check faucet switch, water availability, water pressure status, and examine valve interior for dirt or debris blockage).
  • If all above items show no issues, please contact customer service.

8.4. Low water pressure after using the device

  • Filter screen blockage may cause low water pressure. Check if the filter is clogged with debris and clean if necessary.
  • All water timers slightly reduce water pressure during operation. This is a normal occurrence.

9. User Tips

Based on common user experiences, consider the following tips for optimal performance:

  • Regular Battery Check: Even with long battery life, it's good practice to check battery levels periodically, especially before extended periods of absence.
  • Wi-Fi Signal Strength: Ensure the timer is within a good range of your 2.4GHz Wi-Fi network for reliable remote control and scheduling. Obstacles can reduce signal strength.
  • App Notifications: Enable app notifications for low battery alerts or watering status updates to stay informed.
  • Seasonal Storage: If you live in an area with freezing winters, remember to disconnect the timer and store it indoors to prevent frost damage.

10. Declaration of Conformity

Hereby, WENZHOU NOVA NEW ENERGY CO.,LTD declares that the radio equipment type WT601 is in compliance with Directive 2014/53/EU, 2014/30/EU, 2011/65/EU.

The full text of the EU declaration of conformity is available at the following internet address: https://www.moestech.com/blogs/news/wt601

11. FCC Compliance Statement

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions for each device:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

12. Recycling Information

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

WEEE recycling symbols
WEEE (Waste Electrical and Electronic Equipment) recycling symbols.

13. Warranty Instructions

Thank you for purchasing this product. We hope you enjoy using it. The warranty for the products is granted as follows:

As a condition of using the warranty, you must comply with the following terms and procedures:

  1. Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer.
  2. To exercise warranty rights, the purchaser must present: a) Warranty card, b) Proof of purchase (VAT invoice, financial receipt or other document confirming the actual date of purchase), unless the purchase date of the product comes from the warranty card.
  3. If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and go to the place or store where you purchased it to apply for after-sales maintenance. If the product is damaged due to personal reasons, a certain maintenance fee will be charged.
  4. We recommend that you properly protect the goods when delivering them to the guarantor. For this purpose, we recommend that you use the original packaging with padding to ensure safe transportation. If you choose to use replacement packaging, ensure the product is adequately protected from damage during shipping. Place an appropriate sticker on your packaging indicating the product's susceptibility to impact, such as "Warning Glass".
  5. Reported defects covered by the warranty will be considered immediately and no later than 14 days from the date of delivery of the goods to the Guarantor.
  6. After checking and determining the legality of the warranty claim, the Guarantor's services will repair the product within a reasonable time, not exceeding 30 days from the date of delivery of the goods to the Guarantor. However, if hard-to-find spare parts are required, this deadline may extend the time it takes to deliver the part from the manufacturer's factory.
  7. The warranty does not include the performance of maintenance and similar operations specified in the user manual, and users are obliged to do it themselves.
  8. If defects occur due to natural wear and tear during use, the warranty does not cover it.
  9. The warranty does not cover:
    • Mechanical damage caused by the user's fault and product defects caused by such damage.
    • Damage caused by improper use of the product.
  10. The rights under the guarantee will expire in the following circumstances:
    • Remove the warranty seal from the product.
    • Remove the serial number from the product.
    • Take action to eliminate physical defects in the product outside of authorized service.
    • Use non-original parts and consumables.

14. Support & Contact Information

For further assistance or inquiries, please contact:

UK Representative (EVATOST CONSULTING LTD)Address: Suite 11, First Floor, Moy Road, Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +442921680945
Email: contact@evatost.com
EC Representative (AMZLAB GmbH)Address: Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066
Manufacturer (WENZHOU NOVA NEW ENERGY CO.,LTD)Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service Email: service@moeshouse.com

You can also follow MOES on social media:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.