1. Introduction
The AVATTO ZigBee3.0/Thread Dongle Plus is a versatile USB device designed to enhance your smart home experience. Featuring the high-performance EFR32MG24 chip, this dongle can function as a Zigbee gateway, coordinator, or router within various open-source platforms like Home Assistant, openHAB, and Zigbee2MQTT. It also supports Thread RCP and MultiPAN RCP firmware, allowing it to play multiple roles in your smart home ecosystem.

2. Package Contents
Please check the package for the following items:
- AVATTO ZigBee3.0/Thread USB Dongle (GW70-XK)
- Detachable SMA Antenna

3. Safety Information
WARNING:
- This product is not a toy and is not intended for use by children. It is for adult use only.
- The appliance is suitable for moderate climates only.
- Ventilation must not be impaired by covering the appliance with items such as newspapers, table cloths, curtains, etc.
- Naked flame sources, such as candles, must not be placed on the appliance.
4. Setup Guide
4.1. Physical Connection
- Open the package and carefully connect the detachable SMA antenna to the USB dongle's port. Ensure it is securely fastened.
- Insert the USB dongle into an available USB port on your computer, Raspberry Pi, or Home Assistant Green device.
4.2. Software and Firmware Access
To access the detailed product manual, setup instructions, and firmware files for the GW70-XK:
- Visit the official AVATTO website: https://www.avattosmart.com
- Navigate to the