1. Safety & Warnings
- Read all instructions before use to ensure safety and prevent damage.
- Keep the device out of reach of children under 3 years old.
- Store the headlamp in a dry place, away from moisture and direct sunlight. Ensure good ventilation.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Mind potential fire risk and strictly follow the instruction manual for charging and storage.
- For disposal, check your local authority's website for information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.
2. Package Contents
Please check the package for the following items:
- Superfire HL75-S Headlamp
- Adjustable Headlamp Strap
- USB Type-C Charging Cable
- Packaging Box

Image: Contents of the Superfire HL75-S headlamp package, including the headlamp, strap, and USB-C cable.
3. Setup
3.1. Fitting the Headband
- Adjust the headband to a comfortable fit around your head.
- Secure the headlamp unit to the front of the headband.
- Ensure the lamp body rests flush against your forehead without wobbling for a stable fit.

Image: The comfortable and adjustable headband of the Superfire HL75-S headlamp.
3.2. Charging the Headlamp
The headlamp features a convenient Type-C charging port.
- When the light dims, connect the headlamp to a power source (such as a wall adapter, computer, or power bank) using the provided USB Type-C charging cable.
- The indicator light on the headlamp will illuminate RED to show that charging is in progress.
- Once fully charged, the indicator light will turn BLUE, and the power source may be disconnected.

Image: Superfire HL75-S headlamp connected for Type-C direct charging.

Image: Charging indicator shows red for charging and blue for complete.
4. Operating Instructions
4.1. Power On/Off
- To turn on the headlamp, briefly press the right button.
- To turn off the headlamp from any mode, long press either button for approximately 2 seconds. This saves time and energy by not requiring cycling through all modes.
4.2. Mode Selection (7-Level Adjustment)
The headlamp offers six versatile lighting modes, accessible via the right and left buttons.

Image: Control buttons and available light modes for the Superfire HL75-S headlamp.
White Light Modes (Right Button)
- Bright Light (High Beam): Press the right button once to activate.
- Low Light: Press the right button again to cycle to low light.
- Flashing: Continue pressing the right button to cycle to flashing mode.
- SOS: Continue pressing the right button to cycle to SOS signal mode.
Red Light Modes (Left Button)
- Red Light: Briefly press the left button to activate a steady red light. This mode is ideal for night fishing or wildlife observation as it is less disruptive.
- Red Flashing Light: Press the left button again to cycle to a flashing red light, useful as a warning signal.
4.3. Sensor Mode
The headlamp features a convenient sensor mode for hands-free operation.
- To activate Sensor Mode, press and hold the sensor button (usually indicated by a wave icon) for approximately 2 seconds.
- Once in Sensor Mode, wave your hand near the sensor window to turn the light on or off without needing to press any buttons.
- To exit Sensor Mode, press and hold the sensor button again for 2 seconds.
5. Maintenance
5.1. Cleaning
- The headband is removable for easy cleaning. Hand wash with mild soap and water, then air dry completely.
- Wipe the headlamp body with a soft, slightly damp cloth. Do not use abrasive cleaners or solvents.
- Ensure the sensor window is clean and free from obstructions for optimal performance.
5.2. Storage
- Store the headlamp in a cool, dry place, away from direct sunlight and extreme temperatures.
- If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
6. Troubleshooting
- Light not turning on: Ensure the battery is charged. Connect to a power source and check the charging indicator.
- Light is dim: The battery may be low. Recharge the headlamp fully.
- Sensor mode not responding: Ensure the sensor window is clean and unobstructed. Try turning sensor mode off and on again.
- Headlamp gets warm during use: This is normal for high-power LEDs. If it becomes excessively hot, turn it off and allow it to cool.
7. Specifications
| Model | HL75-S |
| Dimensions | 62mm x 38mm x 36mm |
| Weight | 48g |
| Power | 5W |
| Brightness | Up to 130 Lumens |
| Beam Range | Up to 140m |
| Battery Capacity | 2 x 1000mAh (Built-in) |
| Nominal Voltage | 1.4V |
| Battery Included | Yes |
| Charging Port | USB Type-C |
| Runtime (High) | Up to 4 hours |
| Runtime (Low) | Up to 12 hours |
| Waterproof Rating | IP44 |
| Drop Protection | 1m |
| Certifications | CE, EMC |
| Origin | Mainland China |

Image: Diagram showing key specifications of the Superfire HL75-S headlamp.
8. Warranty & Support
For warranty information, technical support, or any inquiries regarding your Superfire HL75-S headlamp, please contact the seller or the manufacturer directly through your purchase platform. Keep your proof of purchase for warranty claims.