SINOHAMM Spring Light

Contents

SINOHAMM LED Night Light User Manual

Model: Spring Light

1. Introduction

The SINOHAMM LED Night Light (Spring Light) is a portable, rechargeable lamp designed to provide gentle, eye-friendly illumination. It features blue light-free amber and red light options, stepless dimming, and touch control, making it ideal for promoting better sleep and general eye comfort. This manual provides essential information for the safe and effective use of your new night light.

SINOHAMM LED Night Light emitting a soft red glow on a bedside table, with a person sleeping in the background.
The SINOHAMM LED Night Light in a bedroom setting.

2. Package Contents

Ensure all items are present in the package:

  • 1 x LED Night Light (Spring Light)
  • 1 x USB Charging Cable
  • 1 x User Manual

3. Safety Information

Battery Safety

  • Keep batteries out of reach of children. Swallowing can lead to severe internal burns and death in as little as 2 hours. If a battery is swallowed, seek immediate medical attention. Do not induce vomiting.
  • Do not expose batteries to heat, fire, or direct sunlight.
  • Do not disassemble, crush, or puncture batteries.
  • Dispose of batteries according to local regulations. Do not mix with household waste.

Charging Safety

  • Use only the certified USB cable/adapter provided with the product. Do not use incompatible chargers.
  • It is not recommended to keep the lithium-ion battery plugged in for charging all the time, as this can accelerate battery aging, increase safety risks, and reduce battery capacity.
  • Do not charge the device overnight or unattended. Disconnect power if the device overheats or malfunctions.

Not a Toy Warning

This is a lighting device, not a toy. It is not suitable for children under 36 months. Adult supervision is required when used around children to prevent accidental injury or battery ingestion.

4. Setup

Initial Charging

Before using the Spring Light for the first time, fully charge the built-in 1000mAh Polymer lithium-ion battery using the provided USB charging cable. The charging indication light will turn green from red once fully charged. Unplug the device once charging is complete.

Close-up of the lamp's base showing the Type-C charging port.
Type-C Charging Port on the lamp base.

5. Operation

Basic Controls

  • Turn ON/OFF: Lightly pat the top of the lightshade.
  • Adjust Brightness (Stepless Dimming): Long press the top of the lightshade. Brightness will cycle between 10% and 100%.
  • Change Light Color (Dual Version Only): Lightly pat the top of the lightshade again after turning it on to cycle between Red Light, Amber Light, and Dual On (Red + Amber).
Diagram highlighting key features: 1000mAh Battery, Eye Protection, Touch Control, Type-C Charging.
Key features of the LED Bedside Lamp.
Diagram showing three lighting colors: Red Light, Amber Light, and Dual On, along with a brightness adjustment bar from 10% to 100%.
Available lighting colors and brightness adjustment.
Diagram illustrating brightness levels for red light: 25%, 50%, 100%, and OFF.
Brightness levels for the red light.

Visual Demonstration

Watch this video for a demonstration of the lamp's touch controls, dimming, and color changing features:

Video demonstrating the touch control, dimming, and color change functions of the Spring Light.

6. Maintenance

Cleaning

Wipe the surface of the lamp with a soft, dry cloth to remove dust. Do not use water or cleaning agents directly on the device.

7. Troubleshooting

  • Does the light have a flicker effect? The LED night light is designed with flicker-free technology to ensure eye comfort.
  • Does it remember the last brightness setting? The manual does not explicitly state if the device remembers the last brightness setting. Users typically need to adjust it each time it's turned on or after changing modes.
  • Light is very dim: Ensure the lamp is fully charged. If it's a dual-color version, check if it's in a mixed color mode which might appear dimmer than a single color at full brightness. Adjust brightness by long-pressing the top.

8. Specifications

Feature Detail
Product Mode Spring Light
Luminous Flux 60-249 lm
Nominal Voltage 5V
Input Voltage DC 5V / 1.0A
Light Source LED bulbs (6pcs*0.2W Amber/Red, 12pcs*0.2W Dual)
Is Bulbs Included Yes
Body Material ABS + PC
Certification CE, EMC, ROHS
Shape Round
Power Generation Touch
Type Night Light
Wattage 0-5W (Rated power: 1W)
Is Batteries Required Yes
Is Batteries Included Yes
Battery Type Rechargeable Lithium Ion (1000mAh Polymer lithium ion battery)
Power Source DC
Brightness Dimmable (25%-50%-100%)
CRI >80
Lamp's Lumen 80lm
Luminous Efficacy 90lm/w
Working Life 20000 hrs
Weight 110g
Product Size 60*60*90mm
Certificates for CE, RoHS, and FC compliance.
Product Certifications: CE, RoHS, FC.

9. User Tips

  • The soft red light is ideal for pre-sleep use, providing enough illumination without disrupting melatonin production.
  • While compact, the lamp can achieve significant brightness. Adjust to your preference using the stepless dimming feature.
  • For optimal sleep benefits, consider using the red light mode exclusively before bedtime.

10. Support

For detailed instructions and additional information, please refer to the official user manual (PDF) available at the seller's website or by contacting customer support.

The user manual (PDF) can be referenced here.

© 2024 SINOHAMM. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.