Road Top Car Multimedia Display for Mercedes-Benz C Class W204/S204

Contents

Road Top Car Multimedia Display User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Road Top Linux Touch Screen Car Multimedia Display. This device enhances your driving experience by integrating advanced multimedia features, navigation, and smartphone connectivity into your vehicle's existing system.

Compatibility: This multimedia display is designed for Mercedes-Benz C Class W204/S204 models manufactured between 2011 and 2014, equipped with the NTG4.5 or NTG4.7 system.

Road Top Car Multimedia Display showing Wireless CarPlay, Android Auto, Linux System, and 1920x720 resolution

Figure 1: Road Top Car Multimedia Display with key features highlighted.

2. Product Overview

2.1 Product Dimensions

The display is available in two sizes to fit your preference and vehicle's interior.

Comparison of 10.25 inch and 12.3 inch display sizes

Figure 2: Available display sizes: 10.25 inch and 12.3 inch.

2.2 Accessories List

The product package typically includes the following components:

  • Main Screen Unit
  • Mounting Bracket (specific to car model)
  • Power Cable
  • LVDS / USB Cable
  • AMI Cable
Included accessories: Power cable, LVDS/USB cable, AMI cable

Figure 3: Standard accessories included with the multimedia display.

2.3 Compatibility Check

It is crucial to verify your car's original radio system before installation to ensure compatibility. Incorrect system types will not fit or function properly.

Diagram showing compatibility with NTG 4.5/4.7 and incompatibility with NTG 5.0/4.0 based on radio slot type

Figure 4: Guide to check car system compatibility.

Compatibility Details:

  • Original radio NTG 4.5: Fit (Features a small card slot).
  • Original radio NTG 4.7: Fit (Features a small card slot).
  • Original radio NTG 5.0: Not Fit (Features a flat button and small card slot).
  • Original radio NTG 4.0: Not Fit (Features a large card slot).

Notice: Before purchasing, ensure your car model and year are correct, and that your car dashboard matches the picture shown. For other audio car models, please contact support for assistance.

3. Setup and Installation

3.1 Safety Precautions

Reminder: Always ensure the vehicle engine is shut down and the ignition is off before installing or disconnecting any cables to prevent damage to the device or vehicle electronics.

3.2 Car Dashboard Removal

For detailed visual guides on removing your car's dashboard, please refer to the QR codes provided in the official PDF user manual (Page 3) specific to your Mercedes-Benz model. These videos cover various models including A-Class, B-Class, C-Class W204 (2008-2010 & 2011-2014), C-Class W205/GLC, CLS-Class, E-Class/E Coupe, GLK, ML/GL, GLE/GLS, S-Class, and SLK/SLC.

3.3 Cables Connection

Proper cable connection is essential for the correct functioning of your multimedia display.

3.3.1 Ports Introduction

  • NTG4.0 Main Screen: Features dedicated ports for Power, USB, and LVDS cables.
  • NTG4.5/4.7 Main Screen: Features combined ports for Power and LVDS/USB cables.

3.3.2 Cables Connection Chart

  1. Power Cable (to Host Plug): Connect to the plug pulled out from the original host unit.
  2. Power Cable (to Original Car Host): Connect to the original car's host unit.
  3. LVDS Cable (to Original Screen LVDS Cable): Connect to the LVDS cable of the original car screen.
  4. Universal LVDS (NTG4.0 only): Not required for NTG4.0 systems.

3.4 Optical Fiber Cable Installation

If your car is equipped with an optical fiber cable, you must transfer it from the original power cable to the harness of the new multimedia display's power cable.

  1. Carefully remove the optical fiber cable from your car's original power cable connector.
  2. Insert the optical fiber cable into the designated slot on the new power cable harness provided with the multimedia display.

4. Initial Configuration

4.1 Resolution Setups

Correct resolution settings ensure a clear and optimal display.

4.1.1 Vehicle Status Confirmation

Before adjusting the resolution, ensure your car engine is running and the original radio host is turned on. If not, the original radio interface may display

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.