DJI 65W USB CAR Charger

Contents

DJI 65W Car Charger User Manual

Model: 65W USB CAR Charger

1. Introduction

The DJI 65W Car Charger is a practical car accessory designed to charge various devices on the go. It delivers a stable 65W power output and features a USB-C port for charging batteries and remote controllers. This charger also supports PPS and PD protocols, making it compatible with a wide range of devices including smartphones, laptops, and other electronics.

DJI 65W Car Charger and USB-C cable
Figure 1: DJI 65W Car Charger and included USB-C cable.

2. Safety Information

Please read all safety instructions carefully before using the product to prevent damage or injury.

  • This product is intended for recreation use only.
  • Illegal modification of drones/planes or their accessories is prohibited.
  • Always adhere to relevant laws and regulations regarding drone/plane use in your country/area to ensure legal operation.
  • Do not expose the charger to water or moisture.
  • Do not disassemble the charger. Unauthorized repairs will void the warranty.
  • Use the charger in a well-ventilated area to prevent overheating.
  • Keep out of reach of children.
Technical Specifications for DJI 65W Car Charger
Figure 2: Technical Specifications and Safety Notes.

3. Package Contents

Verify that all items are included in your package:

  • DJI 65W Car Charger × 1
  • Dual USB-C Cable × 1
DJI 65W Car Charger and coiled USB-C cable
Figure 3: Contents of the DJI 65W Car Charger package.

4. Setup

  1. Insert the DJI 65W Car Charger into your vehicle's 12V cigarette lighter socket. Ensure it is firmly seated.
  2. Connect one end of the provided Dual USB-C Cable to the USB-C port on the car charger.
  3. Connect the other end of the USB-C cable to your DJI drone battery, remote controller, or other compatible device.
  4. Alternatively, use the USB-A port with a suitable USB-A to device cable for charging other compatible devices.
DJI 65W Car Charger in use, charging a drone in a car
Figure 4: DJI 65W Car Charger connected and charging a drone in a vehicle.

5. Operating the Charger

Once connected, the charger will automatically begin charging your device. The charging status is typically indicated by your device's own battery indicator lights.

  • Fast Charging: The USB-C port supports Power Delivery (PD) and Programmable Power Supply (PPS) protocols for efficient fast charging of compatible devices.
  • Simultaneous Charging: The charger can output power from both the USB-C and USB-A ports simultaneously. Please note that when both charging ports are used, the charging time for each connected device may be slightly longer.
  • Charging Times: All stated charging times are approximate and measured in a laboratory environment. Actual charging times may vary based on environmental conditions, battery status, and simultaneous usage.
DJI 65W Car Charger connected to a USB-C cable
Figure 5: The DJI 65W Car Charger with a connected USB-C cable, ready for use.

Video 1: Overview of the DJI 65W Car Charger and its features.

6. Maintenance

  • Cleaning: Disconnect the charger from the power source and all devices before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspection: Periodically inspect the charger and cable for any signs of damage. If any damage is found, discontinue use immediately.

7. Troubleshooting

Charger is not working:
Ensure the car charger is fully inserted into the vehicle's cigarette lighter socket. Check if the vehicle's power outlet is functioning correctly.
Device is charging slowly:
If multiple devices are connected, charging speed may be reduced. Disconnect one device to see if the speed improves. Ensure your device and cable support fast charging protocols (PD/PPS) for optimal speed.
Charger feels warm:
It is normal for the charger to become warm during operation, especially during fast charging or when charging multiple devices. If it becomes excessively hot, disconnect it immediately and allow it to cool down. Ensure adequate ventilation.

8. Specifications

Feature Detail
Product Name DJI 65W Car Charger
Model 65W USB CAR Charger
Input Voltage 12.7 V to 16 V, 6.5 A
DC Output USB-C
  • 5 V / 5 A
  • 9 V / 5 A
  • 12 V / 5 A
  • 15 V / 4.3 A
  • 20 V / 3.25 A
  • 5 V to 20 V / 3.25 A (PPS)
DC Output USB-A 5 V / 2 A
Operating Ambient Temperature 5 °C to 40 °C
Connectivity USB-C, USB-A
Cable Length 10 inches (approx. 25.4 cm)
Dimensions (approx.) 15 cm (L) x 10 cm (W) x 5 cm (H)
Weight (approx.) 0.2 kg
Compatible Drone Brand DJI
Compatible Models
  • DJI Mavic 3 Series (Mavic 3, Mavic 3 Cine, Mavic 3 Classic, Mavic 3 Pro, Mavic 3 Pro Cine)
  • DJI Mini 5 Pro
  • DJI Air 3, Air 3S
  • DJI Avata, Avata 2
  • DJI Goggles 2
  • DJI Neo 2, Neo
  • DJI Flip
  • DJI RC-N1 Remote Controller
  • DJI RC Remote Controller
  • DJI RC Pro Remote Controller

Approximate Charging Times:

  • DJI Mavic 3 Intelligent Flight Battery: Approx. 1 hour 36 minutes
  • DJI RC-N1 Remote Controller: Approx. 2 hours 40 minutes
  • DJI RC Remote Controller: Approx. 2 hours
  • DJI RC Pro Remote Controller: Approx. 2 hours
  • DJI Avata Intelligent Flight Battery: Approx. 47 minutes
  • DJI Goggles 2 Battery: Approx. 1 hour 50 minutes

9. User Tips

  • Always ensure your vehicle's engine is running when using the car charger to avoid draining the car battery.
  • For optimal charging speed, use the original or certified USB-C cables that support PD/PPS protocols.
  • If charging multiple devices, prioritize the most critical device or charge them sequentially for faster individual charging.
  • Keep the charger and cables organized in your car to prevent tangles and damage.

10. Warranty & Support

For detailed warranty information and customer support, please refer to the official DJI website or contact the manufacturer directly.

A comprehensive user manual in PDF format may be available for download: View User Manual (PDF)

Manufacturer Information:

  • Manufacturer: Shenzhen Huanrong Commercial Management Co., Ltd.
  • Address: Room 4030, Peanut U Valley (Office Building), No. 57, Guangda Road, Baoan Community, Yuanshan Street, Longgang District, Shenzhen, China
  • E-mail: securexhome@outlook.com

EU Representative Information:

  • EU REP: ECLAT SOLUTION SARL
  • Address: Bureau 1145, 37 Passage du Ponceau, Paris 75002 France
  • E-mail: eclatsolution@outlook.com
  • Phone: +33 187652619

This product bears the CE mark, indicating compliance with European health, safety, and environmental protection standards.

© 2024 DJI. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.