SUNSHINE M7

Contents

QUICK M7 Smart Hot Air Rework Station

Model: M7 | Brand: SUNSHINE

1. Introduction

Thank you for choosing the QUICK M7 Smart Hot Air Rework Station. This professional-grade tool is designed for precise desoldering and rework tasks, ideal for BGA chip removal, phone repair, and other delicate electronic work. Featuring 1000W high power, intelligent PID control, and multiple heating modes, the M7 ensures efficient and reliable performance. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.

QUICK M7 Smart Hot Air Rework Station with hot air gun and circuit board

Figure 1: QUICK M7 Intelligent Hot Air Desoldering Station

2. Safety Precautions

Adhering to these safety guidelines is crucial for preventing injury and damage to the equipment.

  • Avoid contact between the hot tip and flammable materials to prevent fire hazards.
  • Do not disassemble the station or replace internal components with non-original parts.
  • Keep the soldering tip clean and tinned regularly to prevent oxidation and ensure optimal heat transfer.
  • Use the station in a well-ventilated area to avoid inhaling soldering fumes.
  • Place the iron on the supplied stand when not in use to prevent accidental burns or damage.
  • Ensure the power is switched off before connecting or disconnecting any components.
  • Always wear appropriate personal protective equipment, such as safety glasses.

3. Package Contents

Please check the package for the following items:

  • QUICK M7 Hot Air Rework Station Unit
  • Hot Air Gun Handle
  • Magnetic Induction Adjustable-Angle Air Gun Holder
  • Various Nozzles (e.g., 12x17mm, 13x13mm, Φ5mm, Φ10mm)
  • Power Cord
  • User Manual
QUICK M7 station with hot air gun, holder, and four nozzles

Figure 2: Station with included accessories

4. Product Overview and Components

Familiarize yourself with the various parts of your QUICK M7 rework station:

Labeled diagram of QUICK M7 station and hot air gun

Figure 3: QUICK M7 Component Diagram

  • Operating Status Display: Shows current temperature, airflow, and mode.
  • Mode Status: Indicates selected heating mode (Standard, Fast, Curve).
  • Air Volume +/- Buttons: Adjust the hot air flow rate.
  • Temperature +/- Buttons: Adjust the target temperature.
  • Power Button: Turns the station on/off.
  • CH1/CH2/CH3 Buttons: Select preset channels for quick recall of temperature and airflow settings.
  • MODE Button: Cycles through Standard, Fast, and Curve heating modes.
  • Settings Button: Accesses system settings.
  • Air Gun Handle: The main tool for desoldering.
  • Magnetic Induction Adjustable-Angle Air Gun Holder: Safely holds the hot air gun and activates sleep mode when placed.
  • Nozzle Storage: Convenient slots for storing extra nozzles.
  • Nozzle Quick-Release Mechanism: Allows for easy and quick nozzle changes.

5. Setup Instructions

  1. Unpacking: Carefully remove all components from the packaging.
  2. Placement: Place the rework station on a stable, heat-resistant, and well-ventilated surface. Ensure there is enough space around the unit for proper airflow.
  3. Connect Hot Air Gun: Connect the hot air gun handle cable securely to the designated port on the main station unit.
  4. Install Nozzle: Select the appropriate nozzle for your task. Align the nozzle with the hot air gun's outlet and push it firmly until it clicks into place using the quick-release mechanism.
  5. Connect Power: Ensure the station's power switch is in the OFF position. Connect the power cord to the station and then plug it into a grounded electrical outlet of the correct voltage (110V US or 220V EU, depending on your model).
  6. Position Holder: Place the magnetic air gun holder in a convenient location near your workspace.

6. Operating Instructions

6.1. Basic Operation

  1. Power On: Press the Power Button (green circle) to turn on the station. The display will illuminate.
  2. Set Temperature: Use the Temperature +/- buttons (red triangles) to adjust the desired temperature. The range is typically 50°C to 550°C.
  3. Set Airflow: Use the Air Volume +/- buttons (blue triangles) to adjust the hot air flow rate.
  4. Select Mode: Press the MODE button to cycle through different heating modes:
    • Standard Mode: General purpose heating.
    • Fast Mode: Rapid heating for quick tasks.
    • Curve Mode: Allows for programmed temperature profiles for specific desoldering needs. (See Figure 4)
  5. Channel Presets (CH1/CH2/CH3): Press CH1, CH2, or CH3 to quickly recall pre-saved temperature and airflow settings. To save a setting, adjust temperature and airflow, then long-press the desired CH button until it beeps.
  6. Heating On/Off: The station will begin heating once settings are applied. You can toggle heating on/off via the UI.
  7. Sleep Function: When the hot air gun is placed in its magnetic holder, the station automatically enters sleep mode, reducing temperature and airflow to prolong heating element life. Lifting the gun from the holder will resume operation.
QUICK M7 screen showing Curve Mode with a temperature graph

Figure 4: Curve Mode Display

6.2. Nozzle Changing

The QUICK M7 features a quick-release nozzle mechanism:

  1. Ensure the hot air gun is cool or use heat-resistant gloves.
  2. Gently pull the nozzle away from the gun's outlet.
  3. Select the desired nozzle and push it firmly onto the gun until it locks into place.

6.3. Magnetic Air Gun Holder

The adjustable-angle magnetic holder provides convenience and extends the lifespan of your hot air gun:

  • Adjust the angle of the holder freely to suit your workspace.
  • When the gun is placed in the holder, it instantly stops heating and enters sleep mode.
  • The quick nozzle release feature on the holder allows for easy nozzle changes with a simple pull-back action.
Diagram showing the adjustable angle and quick release of the magnetic air gun holder

Figure 5: Magnetic Air Gun Holder Features

6.4. Product Demonstration Video

Video 1: QUICK M7 Smart Hot Air Rework Station in action, demonstrating desoldering and UI functions.

7. Maintenance

  • Tip Cleaning: Keep the hot air gun nozzles clean. Regularly remove any solder residue or flux buildup to ensure efficient heat transfer and airflow.
  • General Cleaning: Wipe the station unit and hot air gun handle with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the station in a dry, dust-free environment. Ensure the hot air gun is placed in its holder and all components are cool before storage.

8. Troubleshooting

If you encounter issues with your QUICK M7 station, refer to the table below:

ProblemPossible CauseSolution
No heatPower cord not connected properlyCheck power connection and outlet
Tip not inserted correctlyReinstall the tip securely
Heating element failureContact after-sales support
Temperature fluctuatesPoor tip contactClean and retighten the tip
Oxidation on tip surfaceClean and apply fresh solder
Poor soldering qualityTip temperature too lowIncrease temperature setting
Tip worn outReplace with a new tip

9. Specifications

FeatureSpecification
Model NumberM7
Brand NameSUNSHINE
Power1000W
Temperature Range50°C - 550°C
Heating ModesStandard, Fast, Curve (9-channel)
ControlIntelligent PID Control
DisplayDigital Display
Air Gun HolderMagnetic Induction, Adjustable-Angle
Nozzle ReleaseQuick-Release Mechanism
Dimensions (approx.)202mm (L) x 170mm (W) x 153mm (H)
OriginMainland China
Dimensions of QUICK M7 station and various nozzle sizes

Figure 6: Product Dimensions and Nozzle Sizes

10. User Tips

  • For delicate components, start with a lower temperature and gradually increase it while monitoring the component.
  • Utilize the channel presets (CH1, CH2, CH3) to save frequently used temperature and airflow combinations for different types of components or tasks, saving time during repetitive work.
  • Experiment with the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.