NEWBOLER BAG318

Contents

NEWBOLER Hydration Vest Trail Running Backpack User Manual

Model: BAG318

Introduction

Thank you for choosing the NEWBOLER Breathable Hydration Vest. This lightweight and versatile backpack is designed for various outdoor activities such as trail running, cycling, jogging, marathon, riding, climbing, and hiking. It features a breathable design, ample storage, and reflective elements for safety. This manual provides essential information for the proper setup, operation, and maintenance of your hydration vest.

Front and back view of the NEWBOLER hydration vest worn by a runner

Image: Front and back view of the NEWBOLER hydration vest worn by a runner, showcasing its ergonomic fit.

Setup Instructions

  1. Adjusting Straps: The vest features adjustable shoulder straps, waist straps, and chest straps. Before use, put on the vest and adjust all straps to achieve a snug yet comfortable fit. The ergonomic design ensures scientific load-bearing and reduces burden on the spine. Diagram showing the breathable back system and ergonomic design of the vest

    Image: Diagram illustrating the breathable back system and how the vest fits snugly on the back, distributing weight ergonomically.

  2. Inserting a Water Bag (Hydration Bladder): The main compartment is designed to hold a water bag. Open the main compartment, insert your hydration bladder, and secure it using the internal magic tape fastening webbing. Route the water pipe through the designated outlet on the shoulder strap. Image demonstrating how to insert a water bag into the main compartment and route the shoulder spout

    Image: Step-by-step guide on inserting a water bag and securing the shoulder spout.

  3. Utilizing Front Pockets: The shoulder strap pockets are designed to hold soft kettles (water bottles) on both sides. There is also a small pocket on the shoulder strap suitable for energy gels or other small items. A dedicated compartment is available for mobile phones, accommodating devices up to 7 inches. Detailed view of the front of the vest, highlighting pockets for water bottles, mobile phone storage, and adjustable buckles

    Image: Front detail showing the water pipe fixing strap, small pocket, shoulder strap kettle bag mouth, 7-inch mobile phone storage, adjustable distance buckle, and chest fixed buckle.

Video: A demonstration of the hydration vest being worn and its features, including water bag insertion and pocket usage.

Operating Instructions

  • Hydration: Use the water pipe and shoulder spout for easy access to hydration during your activity. Ensure the pipe is securely fastened to prevent movement.
  • Storage: Utilize the multi-compartments for organizing your essentials. The roomy main compartment is ideal for larger items, while smaller pockets are suitable for mobile phones, keys, energy gels, and other small accessories. Image illustrating the 5L capacity of the vest and various items it can hold, such as a helmet, phone, pump, and glasses

    Image: Visual representation of the vest's 5L capacity and examples of items that can be stored.

  • Safety: The vest is equipped with all-round reflective strips on both the front and back. These reflective materials enhance visibility and ensure safety during night travel or low-light conditions. Front and back views of the vest highlighting the reflective strip design for night safety

    Image: Front and back views of the vest, emphasizing the reflective strips for increased visibility.

Maintenance

  • Cleaning: The vest is made from water-repellent and tear-resistant nylon fabric. For general cleaning, wipe with a damp cloth. For deeper cleaning, hand wash with mild soap and cold water. Do not use bleach or harsh detergents.
  • Drying: Air dry the vest completely in a shaded area. Do not tumble dry or expose to direct sunlight for prolonged periods, as this can damage the fabric and reflective elements.
  • Storage: Store the vest in a cool, dry place away from direct sunlight when not in use. Ensure it is completely dry before storing to prevent mildew.

Troubleshooting

  • Discomfort during wear: Ensure all straps (shoulder, waist, chest) are properly adjusted to distribute weight evenly and prevent chafing. The vest should fit snugly without being too tight.
  • Hydration system issues: If water flow is restricted, check the water pipe for kinks or blockages. Ensure the bite valve is clean and functioning correctly. If using a water bag, check for leaks or punctures.
  • Zippers sticking: Clean any dirt or debris from the zipper teeth. Apply a small amount of zipper lubricant if necessary.

Specifications

Feature Detail
Model Number BAG318
Brand Name NEWBOLER
Material Nylon (Tear-resistant and water-repellent)
Color Black
Capacity 5L
Weight 200g
Dimensions (H x W) 41cm x 21.5cm (16.14in x 8.46in)
Department Name Unisex
Application Position Back
Origin Mainland China (Guangdong)
Occasion Cycling, Mountain Climbing, Camping, Travel, Hiking, Trail Running, Jogging, Marathon
Product information table with dimensions, capacity, weight, material, and occasion

Image: Detailed product information including size, weight, capacity, and material.

User Tips

No specific user tips were available from the provided data. However, general advice for hydration vests includes:

  • Always test the fit and hydration system before a long activity.
  • Clean your hydration bladder and tube thoroughly after each use to prevent mold and bacteria growth.
  • Pack heavier items closer to your back for better balance and comfort.

Warranty and Support

For any questions, concerns, or support regarding your NEWBOLER Hydration Vest, please contact the manufacturer or seller directly. Refer to your purchase documentation for specific warranty details and contact information.

A detailed user manual in PDF format is also available for reference: View User Manual (PDF)

© 2024 NEWBOLER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.