MOES Tuya Zigbee Smart Ceiling LED Light Instruction Manual

1. Introduction

The MOES Tuya Zigbee Smart Ceiling LED Light (Model: ZL5235TD) is a compact, ultra-thin luminaire designed primarily for indoor use. Its low-profile design makes it suitable for installations with limited ceiling space. This smart light offers adjustable brightness and color temperature, providing flexible illumination for various environments such as homes, offices, and retail stores. It supports Zigbee protocol and can be controlled via a smartphone app and voice assistants like Amazon Alexa and Google Home.

2. Safety Warnings

• It is recommended that the fittings are installed by a qualified electrician ensuring the installation complies with current IEE wiring regulations & local building control.
• Always switch off mains supply before installation.

3. Product Specifications

4. Setup and Installation

4.1. Wiring the Light Fixture

Before beginning installation, ensure the main power supply is switched off. Connect the live and neutral wires to the terminal block inside the light fixture. Secure the wires by tightening the screws with a screwdriver.

Video demonstrating the internal wiring connection of the ceiling light.

4.2. Downloading the MOES App

To control your smart ceiling light, download the MOES App. While Tuya Smart/Smart Life App still works, MOES App is recommended for enhanced compatibility and features.

1. Download the MOES App from the App Store (iOS) or Google Play Store (Android), or scan the QR code provided in the manual.
2. Register or Log in:
   • Open the MOES Application.
   • Enter the Register/Login interface.
   • Tap "Register" to create an account by entering your phone number to get a verification code and setting a password.
   • Choose "Log in" if you already have a MOES account.

MOES App download options and QR code.

4.3. Connecting to the Zigbee Hub and App

Ensure you have connected your 2.4G WiFi and a Zigbee hub to the MOES APP. A Zigbee gateway is required and should be purchased separately.

1. Reset the Downlight: Turn the light ON/OFF 5 times consecutively until it flashes. Ensure the time interval between each operation is not too short. After the final "on," turn it off.
2. Confirm Flashing: Confirm that the light is now flashing (approximately 2 times per second). This indicates it's in pairing mode.
3. Add Device in App: In the MOES App, navigate to your Zigbee hub and select "Add Devices" or "Search Device". The configuration process may take 10-120 seconds depending on network conditions.
4. Complete Setup: Once the device is successfully added, you can edit its name and click "Done" to enter the device control page. You can now control your smart downlight from anywhere.

Step 1/2: Resetting the light by cycling power.

Step 2/2: Confirming the light is blinking.

MOES App interface for adding a Zigbee device.

5. Operating Instructions

5.1. App Remote Control

Use the MOES App to control various aspects of your smart ceiling light:

• Brightness Adjustment: Adjust the brightness from 1% to 100%.
• Color Temperature Tuning: Change the color temperature from warm white (1800K) to cool white (6500K).
• RGB Color Selection: Choose from 16 million colors to set the perfect ambiance.
• Scene Modes: Select from predefined scenes (e.g., Night, Read, Working, Leisure) or create custom scenes.
• Music Sync Function: The light can change colors and patterns in sync with music.

MOES App interface for controlling light color and brightness.

5.2. Voice Control

The device is compatible with Amazon Alexa and Google Home. Link your MOES account to your voice assistant app to enable voice commands. For detailed instructions, refer to the online guide: https://www.moestech.com/blogs/news/smart-device-linked-voice-speaker

Example commands:

• "Alexa/OK Google, turn off the light."
• "Alexa/OK Google, set the light to blue."
• "Alexa/OK Google, dim the light to 50%."

6. User Tips

• When adjusting RGB colors, it might be challenging to achieve a perfectly neutral warm white without a slight tint. Experiment with different color temperature settings to find your preferred shade.
• Ensure your Zigbee gateway is properly connected and online for seamless control.
• For bathroom installations, verify the product's IP rating for water resistance. The provided specifications do not include an IP rating, so caution is advised in high-humidity environments.

7. Maintenance

To ensure the longevity and optimal performance of your smart ceiling light, follow these maintenance guidelines:

• Cleaning: Gently wipe the surface of the light with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
• Power Off: Always switch off the main power supply before performing any cleaning or maintenance.
• Storage: If storing the product before installation, keep it in a well-ventilated and dry indoor environment with a temperature range of -40°C to +100°C and a relative humidity of ≤85% RH. The storage area must be free from acids, alkalis, salts, corrosive or explosive gases, and flammable materials. Protect the product from dust, rain, and snow.

8. Troubleshooting

If you encounter problems installing or operating your device, please review the product data sheet and online resources:

• General Issues: Refer to the product data sheet for detailed information: https://www.moestech.com/blogs/news/zcl-td23-rcw-y01
• Connectivity Issues:
  • Ensure your 2.4G WiFi is stable and the Zigbee hub is properly connected to the MOES App.
  • Verify that the light fixture is correctly wired and receiving power.
  • Repeat the reset procedure (ON/OFF 5 times) to put the light back into pairing mode if it fails to connect.
• Voice Control Issues: Check the linking guide for Amazon Alexa and Google Home: https://www.moestech.com/blogs/news/smart-device-linked-voice-speaker

If the product does not power on after installation, and the internal box was damaged, it might indicate damage prior to shipping. Contact customer support for assistance.

9. Declaration of Conformity

Hereby, WENZHOU NOVA NEW ENERGY CO., LTD declares that the radio equipment type ZL5235TD is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, and 2011/65/EU.

The full text of the EU declaration of conformity is available at the following internet address: https://www.moestech.com/blogs/news/zcl-td23-rcw-y01

10. Recycling Information

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste.

To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

WEEE symbol indicating separate collection for electrical and electronic equipment.

11. Warranty and Support

Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer. To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase), unless the purchase date is indicated on the warranty card.

If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and go to the place or store where you purchased it to apply for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee will be charged.

The warranty does not cover:

• Mechanical damage caused by user fault and product defects caused by such damage.
• Damage caused by improper use of the product.
• Defects due to natural wear and tear during use.
• Removal of the warranty seal or serial number from the product.
• Actions to eliminate physical defects outside of authorized service.
• Use of non-original parts and consumables.

For after-sale service, you can contact the manufacturer:

Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
Email: service@moeshouse.com