VISHRT QWE-741

Contents

VISHRT QWE-741 Handheld Industrial Endoscope User Manual

Model: QWE-741

1. Introduction

The VISHRT QWE-741 Handheld Industrial Endoscope is designed for easy, one-handed operation, providing a clear view in various inspection scenarios. It features a 5-inch HD IPS LCD display and a high-sensitivity camera with integrated CREE high-brightness auxiliary lighting, making it suitable for dark environments. This device allows users to capture photos (JPG) and videos (MOV) directly to a TF card. Its built-in 5000mAh rechargeable lithium battery offers up to 6 hours of continuous operation. The camera probes are interchangeable, offering a wide range of lengths, diameters, depths of field, and angles of view to suit diverse inspection needs.

VISHRT QWE-741 Handheld Industrial Endoscope with 5-inch screen and various features
Figure 1: VISHRT QWE-741 Handheld Industrial Endoscope

2. Safety Information

⚠️ Warning: Please read this product manual carefully before using this product and use it according to the instructions to avoid damage and injury caused by improper use.

  • Do not hit the camera violently or pull the cable forcefully.
  • Keep this product clean, dry, and avoid contact with oil and other hazardous materials that can cause corrosion.
  • The camera is not made of high-temperature-resistant materials. Please ensure the temperature inside an engine drops to normal before inspection.
  • This product is not intended for use by persons with limited physical, sensory, or mental abilities without supervision.
  • Keep children out of reach and operation of this product.
  • This product is an industrial endoscopy camera, not suitable for medical use or human inspection.

Disclaimer

Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

3. Package Contents

The package includes the following items:

  • Host unit (with 5-inch IPS screen)
  • Camera Cable (various lengths and lens types available)
  • Instruction Manual
  • Charging cable (Type-C)
  • Accessories: Magnet, Hook, Side Mirror (Note: Side mirror is not included with 3.9mm or dual camera models)
  • Dedicated black tool case for storage, portability, and protection.
Endoscope and accessories neatly packed in a hard carrying case
Figure 2: Endoscope and accessories in carrying case
Various free accessories including hook and magnet
Figure 3: Included Accessories (Hook, Magnet, Side Mirror)

4. Product Overview

Diagram showing key functions and components of the endoscope
Figure 4: Key Function Analysis
  1. Return Key: Used as a "back" function in the menu screen. In image mode, it functions as the "Menu" key.
  2. Up Select Key: Used as an "up" function in the menu screen. In image mode, short press for "Zoom in"; long press for screen rotation.
  3. Confirmation Key (OK): In the menu screen, press briefly to confirm. Press and hold to switch to album (view photos and videos). In image mode, press OK to switch between front view and side view cameras (for dual cameras only).
  4. Down Select Key: Used as a "down" function in the menu screen. In image mode, short press for "Zoom out"; long press for screen rotation.
  5. Shooting Key: Short press to take pictures. Long press to record video; short press again to stop recording.
  6. Brightness Adjustment for Camera LED Light
  7. Power Button: Long press to power on/off.
  8. TF Card Slot
  9. Charging Interface (Type-C)
  10. Camera Probe Interface
  11. RESET Button: Short press to reset or shut down.
  12. Speaker
  13. Auxiliary Lighting
  14. Screen Gear Adjustment Switch
  15. Auxiliary Lighting Switch
Detailed view of the endoscope's LCD screen, flashlight, and non-slip handle
Figure 5: Product Details
  • LCD Color Liquid Crystal Display: 1080P HD color real restoration.
  • 1W Highlight Flashlight: Built-in auxiliary device, 90° rotation for lighting in the dark.
  • Non-slip Handle: Made of non-slip rubber material, ergonomic and comfortable for long use.

5. Setup

5.1 Connecting the Camera Probe

  1. Align the hose connector of the camera probe with the host port.
  2. Insert the connector into the host port.
  3. Turn it clockwise until it is locked securely.

Note: Always connect the camera probe before starting the machine. If you change the camera probe, restart the machine for proper detection.

Image showing how to connect the camera probe to the main unit
Figure 6: Connecting the Camera Probe

5.2 Inserting the TF Memory Card

The device supports storing photos (JPG) and videos (MOV) on a TF card. Ensure the TF card is correctly installed to enable recording and playback functions.

  1. Turn off the device before inserting the TF card.
  2. Locate the TF card slot (8) on the device.
  3. Insert the TF card, paying attention to the correct insertion direction (front and back).
  4. Push the card gently until it clicks into place.
  5. To eject the TF card, press it inward until it springs out.

Caution: Do not use excessive force when inserting or removing the TF card to prevent damage to the card slot structure.

Image showing how to insert a TF card into the device
Figure 7: Inserting the TF Memory Card

5.3 Charging the Device

Use the provided Type-C charging cable to charge the device. The red light on the power-on button will be on during charging and turn off when fully charged. If the device is unused for a long time, charge it at least once every 3 months to prevent battery damage.

Image showing the 5000mAh battery indicator on the endoscope screen
Figure 8: Battery Level Indicator (5000mAh)

6. Operating Instructions

6.1 Power On/Off

Long press the Power button (7) for 3 seconds to power the device on or off.

6.2 Taking Photos and Recording Videos

  • Taking Photos: Short press the Shooting key (5) to capture a picture.
  • Recording Videos: Long press the Shooting key (5) to start recording. Short press it again to stop recording.

6.3 Adjusting LED Lights and Handle Light

  • Use the Brightness adjustment for camera LED light (6) to control the intensity of the camera's LED lights.
  • The handle features a 1W highlight flashlight (13) with 90° rotation, activated by the Auxiliary lighting switch (15), for additional illumination in dark areas.
Image showing adjustable LED lights and waterproof camera probe
Figure 9: Adjustable LED Lights and Waterproof Probe
Image showing the adjustable handle light for brighter visuals
Figure 10: Adjustable Handle Light

6.4 Screen Rotation and Zoom

  • Screen Rotation: Long press the Up Select Key (2) or Down Select Key (4) to rotate the screen 180°.
  • Zoom In/Out: Short press the Up Select Key (2) for "Zoom in" or the Down Select Key (4) for "Zoom out" in image mode.
Image showing multi-angle screen adjustment feature
Figure 11: Multi-angle Screen Adjustment

6.5 Language Settings

The default language is English. To change the language:

  1. Press the Return Key (1) twice to enter the settings page.
  2. Select the second item on the settings page.
  3. Use the Up Select Key (2) and Down Select Key (4) to choose your desired language (English, Chinese, Japanese, Korean, French, German, Italian, Spanish).
  4. Press the Confirmation Key (3) to save.

6.6 Viewing and Managing Files

  • Accessing Album: Long press the Confirmation Key (3) to enter/exit the album.
  • Navigating Files: Use the Up Select Key (2) and Down Select Key (4) to select photos or videos.
  • Deleting Files: Press the Return Key (1) to delete the selected photo or video.
  • Transferring Files: Connect the device to a computer using the Type-C charging cable to copy and check photos or videos. Alternatively, use a TF card reader.

6.7 Live Demonstration

Video 1: Product Unboxing, Assembly, and Demonstration of Use

7. Maintenance

  • Keep the product clean and dry.
  • Avoid contact with oil and other hazardous materials to prevent corrosion.
  • Clean the front of the camera lens with a clean alcohol cloth if the image appears unclear.
  • Store the device in its dedicated tool case when not in use to protect it from damage.

8. Troubleshooting (FAQ)

8.1 Product Does Not Show Pictures or Black Screen

  • Remove the camera connector, reassemble and tighten it.
  • Restart the device.

8.2 Device is Stuck on the Picture

  • Check if the product has sufficient power.
  • Restart the device.
  • Reassemble the camera connector.

8.3 Imaging Picture Not Clear

  • The best imaging focal length is 2cm-10cm. Adjust the distance from the object you are inspecting.
  • Clean the front of the camera with a clean alcohol cloth.
Autofocus lens with wide depth of field from 5cm to 500cm
Figure 12: Autofocus Lens Depth of Field

8.4 Device Crash or Unresponsive Buttons/Blurred Screen

  • Press the "Reset" button (11) on the back of the device to reset it.

8.5 Camera Heating Up

It is normal for the camera to heat up, especially when the LED light is at its highest brightness. This does not affect normal use or service life.

9. Specifications

FeatureDescription
Display Size5 inch IPS Screen
Screen TypeColorful LCD Display
Screen Resolution854*480
Screen Rotation180° screen flip
Camera Pixel1920*1080 (Photo), 1280*720 (Video)
Camera Diameter Options3.9mm, 5.5mm, 8mm
Lens Type OptionsSingle Lens, Dual Lens, Triple Lens, Autofocus Lens
Camera Resolution2 megapixels
Viewing Angle70° (Single/Dual Lens), 78° (Triple/Autofocus Lens)
Auxiliary LightingAdjustable LEDs (6 LEDs for 3.9mm, 8 LEDs for 5.5mm, 8+1 LEDs for 8mm Dual, 6+1+1 LEDs for 8mm Triple)
Focus Range (Front Camera)50-150mm (Autofocus/Triple Lens), 50-100mm (Single/Dual Lens)
Focus Range (Side Camera)50-100mm (Dual/Triple Lens)
LED Flashlight1W high brightness LED light
Operating Temperature32°F - 113°F (0°C - 45°C)
Battery Type5000mAh Lithium Battery
Battery Life3-6 hours
Battery Charging Time4 hours
Cable TypeRigid Cable (1M/2M/3.5M/5M/10M/15M options)
Power InputDC 5V 500mA/1A
PortsType-C charging port, TF memory card slot
Image FormatJPG
Video FormatMP4

Note: Specifications may vary slightly depending on the specific lens configuration.

10. User Tips

  • For the sharpest image with fixed-focus lenses (Single, Dual, Triple), keep the target 4-10cm (front camera) or 2-6cm (side camera) from the lens.
  • The semi-rigid camera cord contains an iron wire, allowing it to be easily bent and shaped to navigate tight spaces and maintain its form during inspection.
  • Image showing the rigid cable with an internal iron wire that can be bent and shaped
    Figure 13: Rigid Cable Design
  • Utilize the included hook and magnet accessories to easily retrieve small objects that may be dropped or stuck during inspections.
  • The ergonomic one-hand grip design allows your other hand to be free for precise probe placement, enhancing inspection efficiency.

11. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)

12. Compliance

This product complies with CE and RoHS standards.

FCCE RoHS MADE IN CHINA

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.