Hyundai 817902E010

Contents

Hyundai Tucson Rear Tailgate Glass Grip Handle Instruction Manual

Model: 817902E010

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of the Rear Tailgate Glass Grip Handle for the Hyundai Tucson. This component is designed to facilitate the opening and closing of the rear tailgate glass.

1.1 Package Contents

  • 1 x Rear Tailgate Glass Grip Handle (OEM Part No. 817902E010)
  • (Note: Additional fasteners or tools may be required and are not necessarily included.)

2. Specifications

Attribute Value
OEM NO. 817902E010
Other Part Number 81790-2E010
Model Name 81790 2E010
Item Type Door Handles
Origin Mainland China
Package Length 10 cm
Package Width 15 cm
Package Height 6 cm
Package Weight 0.045 kg

3. Setup and Installation

The following diagram illustrates the assembly of the rear tailgate glass components, including the grip handle. Professional installation is recommended for automotive parts.

Exploded view diagram of Hyundai Tucson rear tailgate glass assembly with grip handle (81790V) highlighted.
Figure 1: Exploded view of the Hyundai Tucson rear tailgate glass assembly. The grip handle is identified as part number 81790V in the diagram, located at the bottom center of the glass panel.

3.1 Installation Steps (General Guidance)

  1. Ensure the vehicle is safely parked and the engine is off.
  2. Access the interior panel of the tailgate to locate the mounting points for the grip handle.
  3. Carefully remove any existing or damaged grip handle components.
  4. Align the new grip handle (part 81790V in Figure 1) with the designated mounting holes on the tailgate glass.
  5. Secure the grip handle using appropriate fasteners (e.g., screws, clips) as indicated in the vehicle's service manual or by the diagram.
  6. Verify that the handle is firmly attached and functions correctly by gently pulling on it.
  7. Reassemble any removed interior panels.

For detailed, vehicle-specific instructions, consult your Hyundai Tucson's official service manual or a qualified automotive technician.

4. Operating Instructions

The Rear Tailgate Glass Grip Handle is a passive component designed for manual operation. To open or close the rear tailgate glass, grasp the handle firmly and apply gentle, even pressure in the desired direction. Ensure no obstructions are present before operating the tailgate glass.

5. Maintenance

This grip handle requires minimal maintenance. Periodically inspect the handle for any signs of wear, cracks, or looseness. Clean the handle with a soft cloth and mild automotive cleaner as needed. Avoid using harsh chemicals or abrasive materials that could damage the finish.

6. Troubleshooting

6.1 Handle is Loose or Detached

  • Check the mounting screws or clips for tightness.
  • If the handle is damaged, it may need replacement. Refer to the installation section.

6.2 Difficulty Operating Tailgate Glass

  • Ensure the handle itself is not obstructed.
  • Inspect the tailgate glass hinges and latches for proper function. This issue may not be related to the grip handle.

If problems persist, consult a qualified automotive technician.

7. User Tips

  • When installing, ensure the handle is correctly oriented and all fasteners are securely tightened to prevent future looseness.
  • Verify the fit and sturdiness immediately after installation.

8. Warranty and Support

This product is covered by standard manufacturer warranties. For specific warranty details, please refer to the product's original packaging or contact the seller.

A user manual in PDF format is available for additional guidance. You can view it here.

For further assistance or inquiries, please contact customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.