1. Introduction
The diymore GC03 is a versatile MP3 player module designed for DIY music greeting cards, gift boxes, photo albums, and other creative projects. It features 8MB of flash memory, supports USB music download, and offers multiple playback modes with button control. This manual provides detailed instructions for setting up, operating, and maintaining your GC03 module.

Figure 1: GC03 MP3 Player Module Kit Contents
2. Package Contents
Please check the contents of your package. The module is available in two variants:
Package One (Without Battery)
- 1 x GC03 Greeting Card Module
- 1 x Speaker
- 1 x Button
- 1 x Power Cable
- 1 x Screwdriver
- 1 x Adhesive Backing (Double-sided tape)
Package Two (With Battery)
- 1 x GC03 Greeting Card Module
- 1 x Speaker
- 1 x Button
- 1 x Power Cable
- 1 x Screwdriver
- 1 x Adhesive Backing (Double-sided tape)
- 1 x Lithium Battery (pre-connected)

Figure 2: All included components
3. Specifications
| Feature | Specification |
|---|---|
| Model | GC03 |
| Brand | diymore |
| Memory | 8MB Flash Memory |
| Power Supply Voltage | 4.2V - 5.2V |
| Interface | TYPE-C (5V power supply / audio download) |
| Mainboard Dimensions | 49mm x 27mm |
| Speaker Dimensions | 36mm diameter |
| Button Dimensions | 23mm x 13mm |
| Dissipation Power | Low Power Consumption |
| Application | DIY Music Greeting Cards, Gift Boxes, Photo Albums, Toys |

Figure 3: Product dimensions
4. Setup Instructions
Follow these steps to assemble and prepare your GC03 module:
4.1 Component Connection
- Identify Components: Refer to Figure 4 to identify the speaker, button, battery (if included), and main module.
- Connect Speaker: Plug the speaker's red and black wires into the 'SPK' port on the main module.
- Connect Button: Plug the button's red and black wires into the 'KEY' port on the main module.
- Connect Battery (if separate): If your package includes a separate battery, plug its connector into the 'BAT+' port on the main module. Ensure correct polarity.

Figure 4: Circuit Board Diagram with labeled ports
4.2 External Power Supply (Optional)
If not using the battery, you can power the module via the Type-C port or by connecting a 4.5V to 5.2V DC power supply to the dedicated power input pins. Ensure correct polarity (+ and -) when connecting an external power supply.

Figure 5: External power supply connection points
4.3 Adding Ambient Lights (Advanced)
The module supports adding external LED ambient lights by soldering them to the designated pads. Refer to Figure 6 for the soldering points. Ensure correct positive (+) and negative (-) polarity when connecting LEDs.

Figure 6: LED ambient light soldering points
4.4 Music Download
To upload your custom audio files:
- Connect the GC03 module to your computer using a Type-C USB cable.
- The module will appear as a removable storage device.
- Drag and drop your MP3 audio files into the module's storage.
- Safely eject the device from your computer.
4.5 Assembly Demonstration Video
Video 1: Assembly and basic operation demonstration
5. Operating Instructions
5.1 Power On/Off
Locate the ON/OFF switch on the main module. Slide the switch to 'ON' to power on the module and to 'OFF' to power it down.

Figure 7: Power switch and play button
5.2 Playback Control
Once powered on, press the connected button to start playback. The module supports three playback modes, which can be selected using the small slider switch on the mainboard (refer to Figure 8):
| Playback Mode | Description |
|---|---|
| Loop Play | Press the button once to start looping the stored music from the beginning. Press the button again to stop playback. |
| No Loop | Press the button once to play the stored music once from the beginning and then stop. Press the button again during playback to stop. |
| Play Next Play | Press the button once to play the next track. Playback stops after the music finishes. Pressing the button during playback switches to the next track. |

Figure 8: Playback mode selection switch
5.3 Volume Adjustment
The module features a small potentiometer for volume adjustment. Use the included screwdriver to turn the potentiometer:
- Turn clockwise to increase the volume.
- Turn counter-clockwise to decrease the volume.

Figure 9: Volume adjustment potentiometer
6. Maintenance
- Cleaning: Use a dry, soft cloth to gently wipe the module. Avoid using liquids or abrasive cleaners.
- Storage: Store the module in a dry place away from direct sunlight, extreme temperatures, and high humidity.
- Handling: Handle the circuit board by its edges to avoid touching components, which can cause damage from static electricity or oils from your skin.
7. Troubleshooting
No Sound
- Ensure the speaker is correctly plugged into the 'SPK' port.
- Check the volume level using the screwdriver.
- Verify the module is powered on.
- Confirm that MP3 files are correctly loaded onto the module.
Module Not Playing
- Ensure the button is correctly plugged into the 'KEY' port.
- Check the power connection (battery or external supply).
- Verify the power switch is in the 'ON' position.
Module Not Charging
- Ensure the Type-C cable is properly connected to a 5V power source.
- Check the Type-C cable for damage.
- The 'Charge LED' (red) should illuminate when charging.
8. User Tips
- Speaker Connection: Some users have noted that the speaker wires might come attached with silicone rather than solder. If you experience no sound, gently check the speaker wire connections to the speaker itself and re-secure them if loose.
- Battery Compatibility: While the module comes with a small LiPo battery (in the 'With Battery' package), it has been reported to work well with external 18650 batteries for extended operation, provided the voltage requirements (4.2-5.2V) are met.
- Customization: The module is highly customizable. Experiment with different enclosures and ambient lighting to create unique projects.
9. Warranty and Support
For any issues not covered in this manual, please contact your seller for support. Keep your purchase records for warranty claims.