IKSLED Magnetic switch

Contents

IKSLED Magnetic Induction Switch Module User Manual

Model: Magnetic Switch

1. Product Overview

This product is a Magnetic Induction Switch Module, a low-power, high-reliability magnetic sensing control component. The light remains on when powered, and automatically turns off when a magnet approaches. It is suitable for small lighting devices such as book lights and gift box lights.

Two magnetic switch modules and three small magnets
Magnetic Induction Switch Modules and accompanying magnets.

2. Specifications

Parameter Specification
Product Name Magnetic Induction Switch Module
Operating Voltage DC 5V / 12V / 24V
Rated Current 1.5A
Load Power 5V: ≤5W; 12V: ≤10W; 24V: ≤20W
Module Dimensions 19mm × 11mm
Magnet Dimensions Φ11.5mm × 4.8mm
Lead Wire Length 10cm on one side
Function Light ON when powered, OFF when magnet approaches.
Material Iron
Switch Type Reed Switch
Certification RoHS, LVD, EMC, CE
Diagram showing the dimensions of the magnetic switch module and the magnet.
Module and magnet dimensions.

3. Setup

3.1 Pin Identification

  • V+: Power Positive (Red wire)
  • V-: Power Negative (Black wire)
  • LED+: Load Light Positive (Red wire)
  • LED-: Load Light Negative (Yellow wire)
Close-up of the magnetic switch module with V+, V-, LED+, LED- pins labeled.
Pin identification on the module.

3.2 Wiring Instructions

  1. Connect the power positive/negative terminals (V+, V-) to the corresponding DC power supply (5V/12V/24V). Reverse polarity is strictly prohibited.
  2. Connect the positive/negative terminals of the LED light (LED+, LED-) to the corresponding LED+ and LED- pins on the module.
  3. After confirming the wiring is correct, turn on the power.
Wiring diagram showing connections for V+, V-, LED+, and LED- on the module.
Wiring diagram for the magnetic switch module.
Example setup with a 5V battery, magnetic switch module, and an LED strip.
Example application with a 5V power source and LED strip.
Video demonstrating the magnetic switch module in operation, showing an LED light turning off when a magnet approaches.

4. Operating Instructions

Power-On State

The LED load automatically lights up when power is connected to the module.

Induction Trigger

When the matching magnet approaches the module (within the effective sensing range), the LED load automatically turns off. When the magnet is removed, the LED load resumes normal lighting.

Note: The polarity of the magnet does not affect the trigger effect; it only needs to be close to the sensing area of the module.

5. Precautions

  1. The power supply voltage must be within the range of 5V/12V/24V DC. Overvoltage or AC power input is strictly prohibited.
  2. The load power must not exceed the rated value for the corresponding voltage (5V ≤5W, 12V ≤10W, 24V ≤20W) to avoid burning the module.
  3. Pay attention to the positive and negative polarity during wiring; reverse connection will cause the module to fail to work or even be damaged.
  4. Avoid exposing the module to high temperatures, humidity, or strong electromagnetic interference for a long time.
  5. Do not disassemble or bend the module to avoid damaging the internal circuit.

6. User Tips

  • The switch functions by keeping the light on when powered and turning it off when a magnet is present. It is not designed for momentary on/off switching with a quick magnet swipe. The magnet needs to be held in position to keep the light off.
  • If the module does not respond as expected, try reversing the magnet's orientation or using a different magnet, as some magnets may have incorrect polarity or insufficient strength.
  • The module has been confirmed to work reliably with 12V DC power supplies, provided the load power limits are respected.

7. Troubleshooting

  • Light does not turn off when magnet approaches: Ensure the magnet is within the effective sensing range of the module. Try different positions or a stronger magnet.
  • Module not working at all (light never turns on/off):
    • Check all wiring connections for V+, V-, LED+, and LED-. Ensure correct polarity; reverse polarity can damage the module.
    • Verify that the power supply voltage is within the specified range (5V/12V/24V DC) and is stable.
    • Confirm that the connected LED load's power consumption does not exceed the module's rated load power for the operating voltage.
  • Intermittent operation: Check for loose connections. Ensure the module is not exposed to strong electromagnetic interference.

8. Warranty and Support

This product comes with a 1-Year Warranty from the date of purchase.

For further assistance or detailed documentation, please refer to the official user manual PDF:

View User Manual (PDF)

© 2024 IKSLED. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.