1. Product Overview
The CAME TOPD4REN is a multi-function, high-sensitivity, rolling code remote control designed for various gate and garage door opener systems. It operates on a dual frequency of 433.92 MHz and 868.35 MHz, offering broad compatibility and reliable performance.
Figure 1: CAME TOPD4REN Remote Control with key features.
Figure 2: Design highlights of the CAME TOPD4REN remote.
2. Safety Information
2.1 General Precautions
- Keep the remote control out of reach of children.
- Do not expose the remote to extreme temperatures, direct sunlight, or moisture.
- Avoid dropping or subjecting the remote to strong impacts.
2.2 Battery Safety
This product contains a CR2032 button/coin cell battery. Improper handling can be dangerous.
- DO NOT SWALLOW THE BATTERY: Chemical Burn Hazard. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- Dispose of used batteries promptly and safely according to local regulations.
- Do not expose batteries to fire, high temperatures, or mechanical stress (cutting, crushing), as this may result in an explosion or leakage of flammable liquid or gas.
3. Setup and Programming
3.1 Prerequisites
Before proceeding with code memorization, ensure that the Self-Learning Rolling function (U8), if applicable, is activated on your system's control panel. Consult your installer for more information if needed.
To add a new transmitter, you must have an already programmed and working transmitter (the 'master' remote).
3.2 Self-Learning Rolling Code Procedure
Follow these steps to program your new CAME TOPD4REN remote using an existing one:
- On the existing, already programmed remote: Press and hold the button associated with the function you wish to copy. Keep it pressed for approximately 15 seconds, or until the LED on the existing remote remains steadily lit.
- On the new CAME TOPD4REN remote: While the LED on the existing remote is lit, press and hold the corresponding button on your new remote for approximately 3 seconds. The LED on the new remote should flash or light up to indicate successful programming.
For a visual guide, please refer to the programming video below:
Video 1: Demonstration of the remote control pairing process.
4. Operating Instructions
To operate your gate or garage door, simply press the programmed button on your CAME TOPD4REN remote control. Ensure you are within the operational range for reliable function.
- Operational Proximity: For best results, operate the remote within a 5-meter radius of the gate or receiver.
- Maximum Range: The remote has a maximum operational range of up to 150 meters in open areas, though this can be affected by environmental factors and obstacles.
Figure 3: Various applications for the CAME TOPD4REN remote control.
5. Maintenance
5.1 Battery Replacement
The CAME TOPD4REN remote uses a CR2032 3V DC Lithium battery. Replace the battery when the remote's LED indicator becomes dim or the remote stops responding.
- Carefully remove the upper shell of the remote control. You may need a small screwdriver to gently pry it open.
- Remove the old CR2032 battery.
- Insert a new CR2032 3V DC Lithium battery, ensuring the correct polarity (+ and -).
- Snap the upper shell back into place, ensuring it is securely closed.
6. Troubleshooting
- Remote Not Responding: Check the battery. If the LED does not light up or is dim, replace the battery. Ensure you are within the operational range of the receiver. If issues persist, try re-programming the remote.
- LED Not Lighting Up: This usually indicates a dead or improperly inserted battery. Replace the battery.
- Reduced Range: A weak battery can reduce the effective range. Replace the battery. Environmental interference or physical obstructions can also affect range.
7. Specifications
| Feature | Specification |
|---|---|
| Model | TOPD4REN 806TS-0290 |
| Encoding Method | Rolling Code |
| Frequency | Dual Frequency: 433.92 MHz / 868.35 MHz |
| Battery Type | CR2032 3V DC Lithium |
| Radiated Power (max) | < 10 dBm (< 13.98 dBm) |
| Current Draw (on-average) | 10 mA |
| Range (max) | 150 m (open area) |
| Dimensions (L x W x H) | 73mm (2.87in) x 36mm (1.42in) x 13mm (0.51in) |
Figure 4: Dimensions of the CAME TOPD4REN remote control.
8. User Tips
- Reliable Performance: Users report the remote works perfectly and is reliable for daily use.
- Ease of Use: The programming process is straightforward, making it easy to set up.
- Compatibility: This remote is confirmed by users to be compatible with systems like Came BXV.
- Rolling Code Security: As a rolling code remote, it provides enhanced security for your gate or garage door.
9. Warranty and Support
For detailed warranty information, technical support, or further assistance, please refer to the official CAME documentation or visit the CAME official website. You can also consult the comprehensive PDF user manual provided by the manufacturer for additional details and troubleshooting guides.
A PDF user manual is available for download from the seller's product page or the manufacturer's website for more in-depth information.