Homefish CT-EM-008

Contents

Homefish Smart Electric Mop User Manual

Model: CT-EM-008 | Brand: Homefish

I. Safety Warnings

Please read all safety warnings carefully before use to prevent injury or damage.

  1. Do not use the wired version on wet floors (e.g., waterlogged areas) or humid environments (e.g., bathrooms, swimming pools) to prevent electric shock. The wireless version should not be fully submerged in water.
  2. Before mopping, clean large debris (toys, paper scraps, coins) from the floor to avoid wrapping the roller brush or jamming the motor, which can cause equipment malfunction.
  3. Do not let children operate alone. Prevent fingers from entering the rotating roller brush area or touching the charging port to avoid pinching or electric shock.
  4. For the wireless version, only use the included charger; do not use high-voltage devices. If overheating, odor, or smoke occurs during charging, disconnect power immediately and contact after-sales service.
  5. Do not disassemble or modify the body or motor. For the wireless version, do not pierce or squeeze the battery. Unauthorized maintenance will void the warranty and cause safety hazards.
  6. Before cleaning the roller brush, water tank, or replacing accessories, turn off the power (unplug the wired version, long-press to shut down the wireless version) and wait for the roller brush to stop completely.
  7. Avoid plugging/unplugging the wired version or touching the wireless charging port with wet hands. Hold the plug instead of the cord to prevent leakage from damaged wires.
  8. For long-term storage: Unplug the wired version, fully charge the wireless version; Store in a dry, well-ventilated place away from direct sunlight and high temperatures.

II. Product Overview & Features

The Homefish Smart Electric Mop is a fully automatic, handheld, wireless, and portable multi-function mopping machine designed for efficient floor cleaning.

Key Features:

  • Automatic Labor-Saving Mopping: Built-in drive motor moves forward automatically when pushed, eliminating the need for heavy dragging and making it easy to clean large areas.
  • Dual Cleaning Modes: Standard Mode for daily dust and light dirt; Strong Mode for stubborn stains (oil stains, footprints) for more efficient cleaning.
  • Even Water Output: Built-in micro water pump precisely controls water flow to avoid floor waterlogging, protecting moisture-sensitive floors like wood.
  • Detachable Roller Brush: Made of high-elasticity fiber with strong adsorption. The detachable design allows for easy cleaning, making it reusable and economical.
  • Cordless Operation: Offers freedom of movement without the need to change sockets or manage tangled cords.
  • LED Lighting: Front LED spotlight illuminates dark areas, helping to spot hidden stains under furniture.
  • Steam Function: Provides enhanced cleaning power for tough grime.
  • Flexible Design: The mop head can rotate 90 degrees, allowing easy access to hard-to-reach areas like under beds, sofas, and tables.

Product Visuals:

Homefish Smart Electric Mop in green
Main product image of the Homefish Smart Electric Mop.
Wireless electric mop for effortless one-hand use
The wireless design allows for effortless, one-hand operation without socket changes or tangled cords.
Electric mop in white and orange with a bucket for sweeping and dragging
The mop functions as a sweeping and dragging machine, changing the traditional way of cleaning.
Electric mop with front LED spotlight cleaning under furniture
Front LED spotlight illuminates dark areas, revealing stains under beds, sofas, coffee tables, and other furniture.
Electric mop head rotating 90 degrees to clean under low furniture
The mop head features a 90-degree rotation, making it easy to clean under low furniture and tight spaces.
Electric mop adapting to various floor types including marble, ceramic tile, wooden floor, and laminate floor
The mop adapts to a variety of hard floor materials, including marble, ceramic tile, wooden floor, and laminate floor.
Product demonstration video showcasing assembly, operation, and cleaning capabilities.

III. Setup

1. Assembly

The electric mop features a modular design for easy assembly and storage. Connect the handle sections securely until they click into place. Ensure all connections are firm before use.

2. Charging (Wireless Version)

For the wireless version, ensure the battery is fully charged before first use. Charging typically takes about 3 hours, and the indicator light will turn green when fully charged. Use the provided USB cable and a compatible power adapter for charging.

3. Filling the Water Tank

  1. Open the water tank cover.
  2. Pour in clean water or a special floor cleaner. The cleaner-to-water ratio should not exceed 1:50 to avoid corrosion.
  3. Do not exceed the MAX scale (350mL) indicated on the tank.
  4. Tighten the water tank cover securely.

4. Roller Brush Installation

Check that the roller brush is firmly installed and free of tangled hair or debris. If necessary, clean any tangles before use.

IV. Operating Instructions

1. Power On/Off and Mode Selection

  • To Power On: Press and hold the power button for 2 seconds. The mop will default to Standard Mode (blue indicator light).
  • To Switch Modes: Short-press the power button to cycle through modes: Standard Mode (daily cleaning) → Strong Mode (stubborn stains) → Power Off.
  • To Power Off: Long-press the power button. For the wired version, unplug the power cord.

2. Mopping Technique

Hold the handle and gently push the mop. The device will automatically move forward with the rotating roller brush. For stubborn stains, switch to Strong Mode and hold the mop over the affected area for 5-10 seconds, wiping repeatedly.

3. Water Tank Refill Indication

  • Wireless Version: The indicator light will flash when the water tank is low.
  • Wired Version: The roller brush speed will slow down when the water tank is low.

In either case, refill the water tank before continuing operation.

V. Cleaning and Maintenance

1. Roller Brush Cleaning

  1. Turn off the mop and remove the roller brush cover.
  2. Take out the roller brush.
  3. Rinse the roller brush with water to remove hair and stains, or use a cleaning brush to clear tangles.
  4. Allow the roller brush to air dry completely before reinstalling to prevent mold.

2. Water Tank Cleaning

  1. Empty any residual water from the tank.
  2. Wipe the inner wall of the water tank with a soft cloth.
  3. For scale buildup, add a small amount of white vinegar, let it soak for 15 minutes, then rinse thoroughly and dry.

3. Body Cleaning

Wipe surface stains on the mop body with a damp cloth. Avoid water entering the charging port or motor area.

4. Wireless Version Long-Term Storage

If not using the wireless version for an extended period, recharge it every 3 months to prevent battery depletion. Store the device in a dry, well-ventilated place away from direct sunlight and high temperatures.

5. Roller Brush Replacement

It is recommended to replace the roller brush every 6 months for optimal performance. The accessory model for the roller brush is CT-EM-008-RB.

VI. Troubleshooting

Common ProblemSolution
Device cannot start
  • Wired Version: Check if the plug is tight and the socket is powered. Stop using if the power cord is damaged.
  • Wireless Version: Battery is drained - recharge for 30 minutes, then retry. Ensure the power button is pressed and held for 2 seconds (sufficient pressing time).
Roller brush does not rotate or rotates slowly
  • Large debris jams the roller brush - turn off power and clean.
  • Too much hair tangled around the brush - remove, clean, and reinstall.
  • Motor malfunction - contact after-sales for inspection.
Uneven water output or no water during mopping
  • Water level is below the minimum scale - add water.
  • Water outlet is blocked - rinse with clean water.
  • Excessive cleaner ratio causes clumping - dilute or replace with clean water.
Wireless version has shortened battery life
  • Battery aging - contact after-sales for replacement.
  • Frequent use of Strong Mode - switch to Standard Mode to extend life.
  • Battery performance drops in low temperature - use at room temperature.
Body shakes or excessive noise
  • Loose roller brush installation - retighten the cover.
  • Unevenly worn roller brush - replace with a new one.
  • Uneven floor - adjust cleaning route and avoid uneven areas.

VII. Specifications

AttributeValue
Product NameSmart Electric Mop
Brand NameHomefish (QIKUI)
ModelCT-EM-008 (k350)
Voltage220V-240V (Wired Version)
PowerBelow 500W
Weight1.8kg
Heating Temperature100-120℃
Heating Time30 Minutes
Continuous Steam Time5-10 minutes
FeaturesCordless, LED Lighting, Steam function, Suction and dragging
Applicable ScenarioLiving room, bedroom, office, kitchen (Hard floors: tiles, wood floors, marble, PVC floors, etc.)
Not suitable forCarpets or long-haired mats
OriginMainland China

VIII. Warranty and Support

For detailed warranty information, technical support, or to view the complete user manual, please refer to the official PDF document:

View Full User Manual (PDF)

If you encounter any issues not covered in this manual, please contact the seller's customer service for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.