1. Introduction
This manual provides detailed instructions for the safe and effective installation, operation, and maintenance of your Fccemc 12V/24V LED Car Interior Light. Please read this manual thoroughly before use and retain it for future reference.
2. Specifications
| Attribute | Value |
|---|---|
| Product Name | Car decorative light |
| Model | 1 |
| Brand Name | Fccemc |
| Item Type | Atmosphere lamp, Car Reading LED Night Light, Car Interior Light Ceiling Lamp |
| Voltage | DC 12V / 24V (Universal) |
| Light Color | Cold White |
| Lamp Beads Options | 54 LED or 108 LED (COB design) |
| Bracket Material | Aluminum substrate |
| Additional Function | Independent button switch |
| Installation Method | Adhesive paste or screw |
| Lighting Mode | Always bright |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 27 cm, Width: 10 cm, Height: 1 cm |
| Package Weight (approx.) | 0.057 kg |
Product Dimensions
The light is available in two main sizes:
- Small: 15cm (5.905 inches) long x 6cm (2.362 inches) wide
- Large: 24.5cm (9.645 inches) long x 6cm (2.362 inches) wide
3. Safety Warnings
- Observe Polarity: Observe polarity (+/-) strictly. Reverse connection will damage the product.
- Fuse Protection: Install with proper fuse protection to prevent overcurrent, short circuit, and fire risk.
- Professional Installation: Installation by a qualified electrician is recommended. Improper installation may cause vehicle failure or accident.
- Off-Road Use Only: This product is not E-marked / not for road legal use; use on public roads at your own risk.
- Keep Out of Reach of Children: Ensure the product and its components are kept away from children.
- Power Disconnection: Always disconnect the power supply during installation to avoid short circuits.
4. Setup and Installation
Follow these steps for proper installation of your LED interior light:
- Prepare Vehicle Power Supply: Ensure the vehicle power supply matches the light's voltage (12V or 24V).
- Identify Wiring:
- Connect the red wire to the positive terminal (+).
- Connect the black wire to the negative terminal (-).
Figure 3: Wiring Diagram and Switch. This image illustrates the correct wiring connections (red to positive, black to negative) and highlights the integrated ON/OFF switch on the light strip. - Prepare Installation Surface: Before affixing the light strip, clean and dry the desired installation surface thoroughly.
- Mount the Light Strip:
The light strip can be installed using either adhesive paste or screws.
- Adhesive Installation: The light comes with high-strength double-sided tape. Peel off the protective backing and firmly press the light strip onto the cleaned surface.
- Screw Installation: Alternatively, use appropriate screws to secure the light strip through the designated mounting holes.
Figure 4: Adhesive Installation. This image demonstrates the "paste installation" method, showing the protective film being removed from the adhesive backing on the light strip. - Final Check: Once installed, ensure all connections are secure and the light strip is firmly mounted.
5. Operating Instructions
The Fccemc LED Car Interior Light features an independent button switch for easy control.
- Turn On: Press the ON/OFF button located on the light strip to turn the light on. The light will illuminate in a cold white, always-bright mode.
- Turn Off: Press the ON/OFF button again to turn the light off.
6. Maintenance
The Fccemc LED Car Interior Light requires minimal maintenance. To ensure optimal performance and longevity:
- Cleaning: Gently wipe the surface of the light strip with a soft, dry cloth to remove dust or dirt. Do not use abrasive cleaners or solvents.
- Connection Check: Periodically check the wiring connections to ensure they remain secure.
- Avoid Water Exposure: While durable, avoid direct exposure to excessive water or moisture to prevent damage to electrical components.
7. Troubleshooting
If you encounter issues with your Fccemc LED Car Interior Light, refer to the following common troubleshooting steps:
- Light Does Not Turn On:
- Check power connections: Ensure the red wire is connected to positive (+) and the black wire to negative (-). Incorrect polarity will prevent the light from functioning.
- Verify power source: Confirm that the 12V/24V power source is active and providing the correct voltage.
- Inspect fuse: Check if the fuse in your vehicle's circuit (if installed) is blown. Replace if necessary.
- Examine switch: Ensure the ON/OFF switch on the light strip is in the 'ON' position.
- Light Flickers or is Dim:
- Check voltage: Ensure the input voltage is stable and within the 12V-24V range.
- Inspect connections: Loose or corroded wiring connections can cause flickering. Secure and clean connections as needed.
- Adhesive Not Holding:
- Re-clean surface: Ensure the installation surface was thoroughly cleaned and dried before application. Oils, dirt, or moisture can reduce adhesive effectiveness.
- Apply pressure: After applying, ensure sufficient pressure was applied for the adhesive to bond properly.
- Consider screws: If adhesive continues to fail, use the screw installation method for a more secure mount.
If problems persist, contact customer support for further assistance.
8. User Tips
- The light is very bright, providing ample illumination for various applications such as truck interiors, reading lamps, or cargo area lighting.
- The ultra-thin design allows for flexible installation in tight spaces where traditional lighting might not fit.
- Suitable for both 12V and 24V vehicle systems, making it versatile for different vehicles like vans, lorries, trucks, campers, and boats.
- The integrated on/off switch provides convenient control over the lighting without needing to wire to an external switch.
9. Warranty and Support
This product complies with EU RoHS and REACH environmental directives, meets LVD 2014/35/EU low-voltage electrical regulations and EMC 2014/30/EU electromagnetic compatibility regulations, and is suitable for use in the EU market.
Manufacturer Information:
- Company: Guangzhou Zhengji Information Technology Co., Ltd
- Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
- Telephone: 86-13535102100
- Email: zj634216187@163.com
EU Authorized Representative:
- Company: Apex CE Specialists GmbH
- Address: Grafenberger Allee 277, 40237 Dusseldorf, DE
- Email: Info@apex-ce.com
- Telephone: +49 21312066043
A user manual in PDF format is available for download from the seller's website for detailed instructions. Please refer to the product listing or contact customer support for the direct link.