1. Introduction
Thank you for choosing the Fenvi PCE-BE5400 WiFi 7 PCIe Wireless Adapter. This high-performance network card is designed to provide lightning-fast wireless connectivity and advanced Bluetooth capabilities for your desktop PC. Featuring the latest WiFi 7 (802.11be) standard, tri-band operation (6GHz, 5GHz, 2.4GHz), and Bluetooth 5.4, it ensures a stable, high-speed, and interference-free experience for gaming, streaming, and everyday use.
This manual provides detailed instructions for the installation, operation, and troubleshooting of your new wireless adapter. Please read it carefully before use.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Package Contents
Please check the package for the following items:
- 1 x Fenvi PCE-BE5400 WiFi 7 PCIe Wireless Adapter
- 2 x 10dBi High Gain Antennas
- 1 x User Manual (this document)
- 1 x Driver CD (may vary by package)
4. Specifications
| Feature | Description |
|---|---|
| Model Name | PCE-BE5400 |
| Brand Name | fenvi |
| Wireless Communication Standard | 802.11.be (WiFi 7) |
| Wireless Protocol | 802.11ac, 802.11a/g, 802.11ax, 802.11n, 802.11b/g/n |
| Frequency Band Class | Tri-Band (6 GHz, 5 GHz, 2.4 GHz) |
| Wireless Transmission Rate | Up to 5400Mbps (6GHz: 2400Mbps, 5GHz: 2400Mbps, 2.4GHz: 574Mbps) |
| Bluetooth Protocol | Bluetooth 5.4 (backward compatible with 5.3/5.2/5.0/4.0) |
| Interface Type | PCI Express (PCI-E) |
| Antennas | 2 x 10dBi High Gain Antennas |
| Heat Dissipation | Supported (Integrated Heatsink) |
| Application | Desktop PC |
| Supported Technologies | MU-MIMO, 160MHz Channel |
| Certification | CE |
5. System Requirements
- Available PCI-E x1/x4/x8/x16 slot on your motherboard.
- Operating System: Windows 10 (64-bit) or Windows 11 (64-bit).
- An available USB header on the motherboard for Bluetooth functionality.
6. Installation Guide
6.1. Hardware Installation
- Power Off Your PC: Completely shut down your computer and unplug the power cord from the wall outlet.
- Open PC Case: Remove the side panel of your computer case.
- Locate PCI-E Slot: Find an available PCI-E x1, x4, x8, or x16 slot on your motherboard.
- Insert Wireless Adapter: Carefully insert the Fenvi PCE-BE5400 adapter into the chosen PCI-E slot, ensuring it is firmly seated. Secure it with a screw if your case requires one.
- Connect USB Cable: Connect the included USB cable from the adapter to an available USB 2.0 header on your motherboard. This connection is essential for Bluetooth functionality.
- Attach Antennas: Screw the two 10dBi high gain antennas onto the connectors on the back of the adapter. Adjust their orientation for optimal signal reception.
- Close PC Case: Replace the side panel of your computer case and reconnect the power cord.
- Power On PC: Turn on your computer.
6.2. Driver Installation
After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality.
- Obtain Drivers: Please obtain the corresponding drivers from the official Fenvi website. It is recommended to download the latest drivers for your specific operating system (Windows 10/11 64-bit). A driver CD may be included, but online drivers are often more up-to-date.
- Install Wi-Fi Driver: Locate and run the Wi-Fi driver setup file. Follow the on-screen instructions to complete the installation.
- Install Bluetooth Driver: Locate and run the Bluetooth driver setup file. Follow the on-screen instructions to complete the installation.
- Restart PC: After installing both drivers, restart your computer to ensure all changes take effect.
7. Operating Instructions
7.1. Connecting to a Wi-Fi Network
Once the drivers are successfully installed and your PC has restarted:
- Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
- A list of available Wi-Fi networks will appear.
- Select your desired network and click "Connect".
- Enter the network security key (password) if prompted, then click "Next" or "OK".
- Your PC should now be connected to the Wi-Fi network.
7.2. Pairing Bluetooth Devices
To use Bluetooth functionality, ensure the USB cable is connected to your motherboard's USB header.
- Go to Windows Settings > Devices > Bluetooth & other devices.
- Ensure Bluetooth is turned "On".
- Click "Add Bluetooth or other device" and select "Bluetooth".
- Put your Bluetooth device (e.g., headphones, mouse, gamepad) into pairing mode.
- Select your device from the list that appears on your PC.
- Follow any on-screen prompts to complete the pairing process.
8. Maintenance
The Fenvi PCE-BE5400 adapter requires minimal maintenance. To ensure optimal performance and longevity:
- Keep your PC case clean to prevent dust buildup on the adapter's heatsink, which can affect heat dissipation.
- Ensure adequate airflow within your PC case.
- Periodically check the manufacturer's website for updated drivers to benefit from performance improvements and bug fixes.
9. Troubleshooting
9.1. No Wi-Fi Connection
- Check Hardware: Ensure the adapter is correctly seated in the PCIe slot and antennas are securely attached.
- Check Drivers: Verify that the Wi-Fi drivers are installed correctly in Device Manager. Reinstall if necessary.
- Enable Wi-Fi: Make sure Wi-Fi is enabled in Windows settings.
- Router Issues: Restart your Wi-Fi router.
9.2. No Bluetooth Functionality
- Check USB Connection: Ensure the internal USB cable from the adapter is securely connected to a USB header on your motherboard. This is critical for Bluetooth.
- Check Drivers: Verify that the Bluetooth drivers are installed correctly in Device Manager. Reinstall if necessary.
- Enable Bluetooth: Make sure Bluetooth is enabled in Windows settings.
- Device Pairing: Ensure your Bluetooth device is in pairing mode and within range.
9.3. Slow Wi-Fi Speeds
- Antenna Position: Adjust the orientation of the antennas for better signal reception.
- Router Distance/Obstacles: Move closer to your Wi-Fi router or remove obstacles that might be blocking the signal.
- Router Compatibility: Ensure your router supports WiFi 7 (802.11be) and the 6GHz band for optimal performance.
- Driver Updates: Ensure you have the latest drivers installed from the Fenvi official website.
- Interference: Other wireless devices or electronics can cause interference. Try changing your router's Wi-Fi channel.
10. User Tips
- Always Use Latest Drivers: For the best performance and compatibility, regularly check the Fenvi official website for the latest Wi-Fi and Bluetooth drivers.
- Antenna Placement: Experiment with different antenna orientations to find the best signal strength for your setup. Sometimes a slight adjustment can make a significant difference.
- USB Header for Bluetooth: Remember that the internal USB cable connection to your motherboard is mandatory for Bluetooth functionality. Without it, Bluetooth will not work.
11. Compliance Information
This device complies with relevant regulatory standards. The product bears the following compliance marks:
For detailed compliance statements, please refer to the official product documentation or contact Fenvi support.
A PDF version of the user manual may be available for download from the official website: Fenvi PCE-BE5400 User Manual (PDF)
12. Warranty & Support
For warranty information, technical support, or service inquiries, please contact the manufacturer directly.
Manufacturer Information:
- Manufacturer: Shenzhen Fenvi Technology Co., LTD.
- Address: 401 North Block, Beier Road, Hi-tech Industrial Park, Bantian Subdistrict, Longgang District, Shenzhen, Guangdong Province, China
- Phone: 0755-83628485
EU Authorized Representative:
- Company: E-CrossStu GmbH
- Address: Mainzer Landstr.69
- Email: e-crossstu@outlook.com
- Phone: +49-69332967674