KME Car Wave Inverter

Contents

KME Car Wave Inverter User Manual

Models: 500W, 1200W, 2000W, 2600W

1. Safety Information

WARNING: Please strictly follow this user manual, safety tips, and use the product with caution.

  • DO NOT expose the inverter to water, rain, or damp environments. This inverter is not waterproof.
  • Keep the inverter in a well-ventilated and dry environment to prevent overheating.
  • Ensure the inverter is properly connected with correct polarity: Red terminal to positive (+) and Black terminal to negative (-).
  • Avoid placing the inverter near heat-sensitive objects or in direct sunlight.
  • This inverter is designed for use with resistive devices only. Do not connect inductive loads such as motors, refrigerators, or air conditioners unless explicitly stated for your specific model and wattage.

2. Product Overview

The KME Car Wave Inverter is designed to convert DC power (from a car battery, solar panel, etc.) into AC power, allowing you to operate various electronic devices. It is suitable for powering a wide range of electronic devices such as laptops, smartphones, tablets, cameras, and small home appliances using DC power sources, including cars, boats, and RVs.

This inverter features smart cooling, USB output, multi-protection circuits, and stable output for reliable performance.

KME Car Wave Inverter showing different power options and features
Figure 1: KME Car Wave Inverter with power options (500W, 1200W, 2000W, 2600W) and features (Smart Cooling, USB Output, Multi Protection, Stable Output).

3. Specifications

Feature Specification
Product TypePower Inverter (DC/AC Inverter)
Input Voltage (DC)12V / 24V / 36V / 48V / 60V (model dependent)
Output Voltage (AC)220V (or 110V/230V model dependent)
Output Voltage Range220V ±10%
Output Frequency50Hz / 60Hz
Output TypeSINGLE
Peak Power500W / 1200W / 2000W / 2600W (model dependent)
Continuous Power350W (for 500W model) / 600W (for 1200W model) / 800W (for 2000W model) / 950W (for 2600W model)
Inverter Efficiency90%
Circuit TopologyPush-type
No-load Current≤0.7A
Low-voltage ProtectionMinimum protection voltage 9.5V (for 12V models)
High-voltage ProtectionMaximum protection voltage 15.5V (for 12V models)
Overload ProtectionYes
Output Short Circuit ProtectionYes
Output Voltage RegulatorYes
USB Port3.6A x 1
Output Connector220V Output Connector
Case ColourBlue
AccessoriesBattery clip + cigarette lighter
CertificationCE
OriginMainland China

Model-Specific Dimensions and Power:

  • 500W Inverter dimensions and power ratings
    Figure 2: 500W Model - Dimensions: 6cm x 14.5cm x 10.5cm. Continuous Power: 350W, Peak Power: 500W.
  • 1200W Inverter dimensions and power ratings
    Figure 3: 1200W Model - Dimensions: 6cm x 19cm x 10.5cm. Continuous Power: 600W, Peak Power: 1200W.
  • 2000W Inverter dimensions and power ratings
    Figure 4: 2000W Model - Dimensions: 6cm x 21.5cm x 10.5cm. Continuous Power: 800W, Peak Power: 2000W.
  • 2600W Inverter dimensions and power ratings
    Figure 5: 2600W Model - Dimensions: 6cm x 25cm x 10.5cm. Continuous Power: 950W, Peak Power: 2600W.

4. Setup Instructions

  1. Choose the Correct Inverter Voltage: Ensure your inverter's input voltage matches your battery's voltage. Connecting a 12V inverter to a 24V battery, or vice-versa, will damage the unit.

    • 12V inverter: Connects to 12V battery (Normal operating range: 9V to 14.5V)
    • 24V inverter: Connects to 24V battery (Normal operating range: 20V to 28V)
    • 36V inverter: Connects to 36V battery (Normal operating range: 30V to 40V)
    • 48V inverter: Connects to 48V battery (Normal operating range: 40V to 55V)
    • 60V inverter: Connects to 60V battery (Normal operating range: 50V to 70V)
  2. Connect to Power Source: Use the provided battery clips or cigarette lighter adapter to connect the inverter to your DC power source (e.g., car battery). Ensure correct polarity: connect the red terminal of the inverter to the positive (+) terminal of the battery and the black terminal of the inverter to the negative (-) terminal of the battery.

    WARNING: Incorrect polarity can cause severe damage to the inverter and battery.

  3. Placement: Place the inverter in a well-ventilated, dry area, away from direct sunlight and heat-sensitive objects. Ensure there is adequate airflow around the unit to prevent overheating.

5. Operating Instructions

Front Panel Components:

Diagram of inverter front panel with labels
Figure 6: Inverter Front Panel. Key components include: 220 Volt Output Connector, Input Voltage Display, Work Indicator Light, Warning Light, USB Port, and Power Switch.
  • Power Switch: Turns the inverter ON/OFF.
  • Input Voltage Display: Shows the current DC input voltage from your battery.
  • Work Indicator Light: Illuminates when the inverter is operating normally.
  • Warning Light: Illuminates to indicate a fault or protection mode (e.g., low voltage, high voltage, overload).
  • USB Port (3.6A): Provides 5V DC power for charging USB-powered devices like smartphones and tablets.
  • 220 Volt Output Connector: Standard AC outlet for plugging in your AC-powered devices.

General Operation:

  1. After connecting the inverter to your DC power source, press the Power Switch to turn on the inverter.
  2. The Input Voltage Display will show the battery voltage, and the Work Indicator Light should illuminate.
  3. Plug your AC-powered device into the 220 Volt Output Connector. For USB charging, plug your device into the USB Port.
  4. Ensure the total continuous power draw of your devices does not exceed the inverter's continuous power rating.
  5. When finished, turn off the inverter using the Power Switch and disconnect it from the power source.

Supported Devices:

This inverter is ideal for powering small electronic devices and appliances for outdoor and car use. Examples include:

  • Smartphones, Tablets, Cameras
  • Laptops
  • LCD TVs
  • Small Fans
  • Rice Cookers (within wattage limits)
Inverter in a car powering a smartphone, laptop, and fan
Figure 7: Inverter in use inside a car, charging mobile devices and powering a fan.
Inverter in an outdoor camping setting powering a laptop, TV, and fan
Figure 8: Inverter providing power in an outdoor camping scenario.

Important Note: This inverter primarily supports resistive devices. It is not recommended for high-power inductive loads such as air conditioners (e.g., 220V 230W air conditioners) or other devices exceeding 1200W, as this can cause damage or trigger protection mechanisms.

6. Maintenance

  • Keep the inverter clean and free from dust and debris. Use a dry cloth for cleaning.
  • Ensure the cooling vents are not blocked to allow for proper heat dissipation.
  • Store the inverter in a cool, dry, and well-ventilated place when not in use.
  • Regularly check the battery connections for tightness and corrosion.

7. Troubleshooting

  • Inverter not turning on / No output:
    • Check battery connections for correct polarity and tightness.
    • Ensure the battery voltage matches the inverter's input voltage requirement.
    • Verify the battery is charged and within the normal operating voltage range (e.g., 9V-14.5V for 12V systems).
    • Check if the inverter's internal fuse (if accessible) has blown.
  • Warning Light is on / Inverter shuts down:
    • Low Voltage Protection: Battery voltage is too low. Recharge or replace the battery.
    • High Voltage Protection: Battery voltage is too high. Disconnect immediately.
    • Overload Protection: The connected device(s) exceed the inverter's continuous power rating. Disconnect some devices or use a lower-power appliance.
    • Overheat Protection: The inverter is too hot. Ensure proper ventilation and reduce load.
    • Short Circuit Protection: A short circuit is detected in the output. Disconnect all devices and check for faults.
  • No output voltage despite display being on: This can occur with lithium batteries if their low voltage capacity triggers high voltage protection. It is recommended to use lead-acid or water batteries for more stable voltage with this inverter.

8. User Tips

  • For optimal performance and stability, especially with higher wattage models, consider using lead-acid or water batteries instead of lithium batteries, as some lithium batteries may trigger high voltage protection due to their low voltage capacity.
  • This inverter can be used in both passenger cars and trucks, provided the inverter's input voltage (12V, 24V, etc.) matches the vehicle's battery system.
  • Always calculate the total wattage of the devices you intend to power to ensure it does not exceed the inverter's continuous power rating.

9. Frequently Asked Questions (FAQ)

Q: Can this inverter operate from a passenger car or a truck?
A: Yes, it can operate from both passenger cars and trucks, provided you select the inverter model with the correct input voltage (e.g., 12V for most cars, 24V for many trucks) to match your vehicle's battery system.
Q: What is the output frequency of this inverter?
A: The output frequency is 50Hz or 60Hz, depending on the specific model. The 220V output models typically operate at 50Hz.
Q: Can I use this inverter with an air conditioner?
A: This inverter is generally not recommended for high-power inductive loads like air conditioners (e.g., 220V 230W air conditioners). It is best suited for resistive devices and loads not exceeding 1200W for optimal performance and to avoid triggering protection mechanisms.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download. You can access it via the following link: KME Power Inverter User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.