AVATTO GW70-XK

Contents

AVATTO ZigBee/Thread USB Dongle Plus EFR32MG24 User Manual

Model: GW70-XK | Brand: AVATTO

1. Introduction

The AVATTO ZigBee/Thread USB Dongle Plus EFR32MG24 (Model: GW70-XK) is a versatile USB coordinator designed for smart home automation. Featuring the powerful EFR32MG24 chip, it can function as a Zigbee gateway within various open-source platforms such as Home Assistant, openHAB, and Zigbee2MQTT. It also supports Thread protocol, enabling seamless integration with a wide range of smart devices.

This dongle is pre-flashed with Zigbee coordinator firmware based on EZNet 6.10.3, making it ready for immediate use. Its robust design includes an aluminum housing for reduced interference and a rotatable high-gain antenna (5dB) for extended signal coverage up to 200 meters. The device supports connecting up to 128 sub-devices, offering a comprehensive solution for expanding and stabilizing your smart home network.

AVATTO Zigbee/Thread USB Dongle Plus EFR32MG24, showing compatibility with Home Assistant, openHAB, Zigbee2MQTT, and Thread.
Figure 1: AVATTO Zigbee/Thread USB Dongle Plus EFR32MG24, compatible with Home Assistant, openHAB, Zigbee2MQTT, and Thread.

2. Safety Information

  • This product is not a toy and is not intended for use by children. For adult use only.
  • The appliance is suitable for moderate climates only.
  • Ventilation must not be impaired by covering the appliance with items such as newspapers, table cloths, curtains, etc.
  • Naked flame sources, such as candles, must not be placed on the appliance.

3. Package Contents

Please check the package contents upon receipt. The standard package includes:

  • 1 x AVATTO ZigBee/Thread USB Dongle Plus EFR32MG24 (GW70-XK)
  • 1 x Detachable Rotatable Antenna
  • 1 x User Manual (this document)
AVATTO Zigbee/Thread USB Dongle with its antenna and product packaging.
Figure 2: AVATTO Zigbee/Thread USB Dongle with antenna and packaging.

4. Setup Instructions

4.1. Physical Connection

  1. Open the package and carefully remove the dongle and antenna.
  2. Connect the rotatable antenna to the USB dongle's SMA external interface. Ensure it is securely fastened.
  3. Insert the USB dongle into an available USB port on your computer, Raspberry Pi, Home Assistant Green, or other compatible host device.
Detailed features of the AVATTO USB Dongle, including rotatable antenna, aluminum housing, pre-flashed firmware, software flow control, 5dB gain, and EFR32MG24 chip.
Figure 3: Physical features and connection points of the AVATTO USB Dongle.

4.2. Software Setup and Firmware Access

The GW70-XK comes pre-flashed with Zigbee coordinator firmware (EZNet 6.10.3) for out-of-the-box functionality. For detailed product manuals, firmware files, or to flash different firmware modes, follow these steps:

  1. Visit the official AVATTO website: https://www.avattosmart.com
  2. Navigate to the "Home Assistant Dongle" section and locate the GW70-XK model.
  3. Click "Learn More" and scroll to the bottom of the page.
  4. Select "Enter" under "Technical Support" to view setup instructions and download firmware/updates.

Alternatively, you can scan the QR code provided in the printed manual for direct access to the detailed device operation guide.

Diagram illustrating wider signal coverage, showing the dongle acting as a coordinator and routers extending the network throughout a house.
Figure 4: Example of a smart home network with the dongle as a coordinator and routers.

5. Operating Instructions

5.1. Firmware Modes and Roles

The GW70-XK supports four distinct firmware modes, allowing it to fulfill different roles within your smart home ecosystem:

  • Zigbee Coordinator (Pre-flashed): Acts as the central gateway for your Zigbee network. It works seamlessly with Home Assistant (ZHA/Z2M), openHAB, and other compatible platforms to locally control all your Zigbee devices.
  • Zigbee Router: Extends the range and stability of your existing Zigbee network. This is ideal for larger homes or areas with weak signal coverage.
  • Thread RCP (Radio Co-Processor): Connects Matter over Thread devices to a Thread Border Router. This mode supports platforms like Apple Home, Google Home, and SmartThings.
  • MultiPAN RCP: Allows the dongle to run both Zigbee and Thread protocols simultaneously. This mode is designed for mixed ecosystems and advanced users who require concurrent operation of both protocols.

You can easily flash the dongle with Zigbee Router, Open Thread RCP, or MultiPAN RCP firmware using the AVATTO Dongle flashing tool available on the official website.

5.2. Device Management

As a Zigbee 3.0 gateway, the dongle enables you to manage various sub-devices from different brands within your chosen open-source automation platform. It supports connecting up to 128 devices.

Diagram showing the dongle supporting over 128 sub-devices in a smart home ecosystem.
Figure 5: The dongle's capacity to manage over 128 smart home devices.
An application scenario showing the AVATTO dongle integrating various smart home devices like lights, sensors, and thermostats.
Figure 6: Typical application scenario with the AVATTO dongle connecting various smart devices.

6. Maintenance

  • Keep the device in a dry environment and avoid exposure to moisture or extreme temperatures.
  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Ensure proper ventilation around the device to prevent overheating.
  • Avoid dropping or subjecting the device to strong impacts.

7. Troubleshooting

7.1. General Issues

  • Device not recognized: Ensure the dongle is fully inserted into the USB port. Try a different USB port or a different host device (computer, Raspberry Pi). Verify that necessary drivers or software components are installed on your host system.
  • Poor signal or connectivity issues:
    • Ensure the antenna is securely attached and positioned optimally (e.g., upright).
    • Relocate the dongle to a more central position within your smart home.
    • Consider adding Zigbee routers (other compatible devices or another dongle flashed as a router) to extend network coverage.
    • Check for potential interference from other wireless devices (Wi-Fi routers, microwaves) and try to minimize it.
  • Devices not pairing:
    • Ensure the dongle is in pairing mode within your smart home platform (e.g., Home Assistant ZHA/Z2M).
    • Reset the Zigbee device you are trying to pair according to its manufacturer's instructions.
    • Bring the device closer to the dongle during the pairing process.
    • Verify that the device is compatible with Zigbee 3.0 or the specific protocol your dongle is configured for.

7.2. Firmware Flashing Issues

  • If you encounter issues during firmware flashing, ensure you are using the correct flashing tool and firmware file from the official AVATTO website.
  • Follow the flashing instructions precisely. Incorrect flashing can render the device inoperable.
  • If the device becomes unresponsive after a failed flash, refer to the technical support section on the AVATTO website for recovery procedures.

8. Specifications

Feature Specification
Model Number GW70-XK
Brand Name AVATTO
Chip EFR32MG24
Flash Memory 1536 KB (1.5 MB)
RAM 256 KB
Flash Program Cycles 500 times
Wireless Communication Frequency 2.4GHz-2.48GHz
Supported Protocols Thread, Zigbee 3.0, Bluetooth 5.2 LE
Antenna Gain 5dB
Communication Distance Up to 200m (open space)
Max Sub-devices Supported 128+
Port Connection /dev/ttyUSB0 (standard)
Shell Material Aluminum alloy
Working Temperature -10°C ~ 40°C
Dongle Dimensions (L x W x H) 73mm x 24.5mm x 11mm (2.87in x 0.965in x 0.433in)
Antenna Length 153.7mm (6.05in)
Certification CE, FC
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc
High-concerned chemical None
Technical drawing showing the dimensions of the AVATTO USB Dongle and its antenna, along with key product parameters.
Figure 7: Product dimensions and key parameters.
Comparison table detailing different Zigbee gateway types, protocols, functions, equipment numbers, ranges, app names, antenna gains, stability, and types.
Figure 8: Comparison of Zigbee Gateway types and their specifications.

9. User Tips

  • For optimal performance, ensure the dongle's antenna is positioned vertically and away from large metal objects or other wireless transmitters.
  • If experiencing range issues, consider placing the dongle in a central location or utilizing Zigbee Router devices to create a mesh network.
  • Regularly check the AVATTO official website for firmware updates to ensure compatibility and access to new features.
  • When integrating with Home Assistant, ensure your Home Assistant instance is up-to-date for the best experience with Zigbee2MQTT or ZHA.

10. Warranty and Support

This product comes with a 1-year warranty from the date of purchase from the AVATTO Digital Store.

For technical support, troubleshooting assistance, or any other inquiries, please contact AVATTO customer service:

When contacting support, please provide your product model (GW70-XK) and a detailed description of the issue.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.