1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your MYOSLIM 3D ASISA X5/X5 Pro AI Skin Image Analyzer. Please read it thoroughly before installation and operation.
Product Overview
The X5/X5 Pro AI Skin Image Analyzer is an advanced device integrating a high-precision multispectral imaging system with AI deep learning algorithms. It is designed for multidimensional analysis of skin tissue, providing a quantitative diagnosis basis for skin intervention programs. This device is suitable for professional skin management institutions, health management, and scalp health management fields.
Key Features:
- Super cloud computing for unprecedented analysis speed.
- Objective and accurate data.
- Industrial-grade high-definition camera for perfectly presenting high-definition images.
- Face recognition to automatically outline the face, saving time and effort.
- Intelligent deep learning for automatic instrument upgrades and increasingly accurate data.
- Cloud storage with unlimited capacity.
- Support for user multi-account management.
2. Setup and Installation
Follow these steps to properly set up your X5/X5 Pro AI Skin Image Analyzer.
2.1. Unboxing and Component Check
Upon receiving the product, carefully open the packaging and identify all components. Refer to the unboxing video for visual guidance.
Product List:
- Tablet stand base bracket
- Instruction Manual
- Microscope base
- Microscope
- USB cable
- Host power cable
- Tablet power adapter
- Neck blackout cloth
- Screwdriver and screws
- Main unit
- Tablet
- Tablet base
2.2. Tablet Stand Base Installation
- Place the tablet stand over the stand base slot.
- Rotate the stand base lock ring 180 degrees to secure it.
2.3. Bracket and Tablet Installation
- Secure the assembled base bracket to the back of the tablet.
- Sequentially tighten the four screws using the provided screwdriver.
2.4. Tablet Accessories Installation
- Insert the tablet power cable, USB connection cable, and the USB interface of the micro moisture meter sequentially at the bottom of the tablet stand.
- During operation, you may rotate the tablet by 90 degrees.
2.5. Host Hardware Installation
- Insert the host power cord and the other end of the USB cable into the back of the host.
2.6. Power On
- Connect the host power cord and the tablet charger to an energized outlet respectively.
- Press the power button at the bottom of the host. The illumination of the indicator light signifies that the device is turned on.
- To turn off, simply click the power button again or unplug the power cord from the outlet.
2.7. Tablet Power Switch
- Swipe up from the bottom of any screen to find the power button, click to select, and then choose shutdown to turn off the device.
3. Operating Instructions (App Usage)
This section details how to use the X5/X5 Pro AI Skin Image Analyzer's application.
3.1. Network Connections
- After the device is turned on, a network connection prompt will automatically pop up.
- Click "Confirm" to select the appropriate network and then enter the password to connect to the network.
- Once connected, click the return button in the upper right corner to return to the main interface.
3.2. Account Registration and Login
- First Login: Click the register button to enter the registration page. Fill in the required fields in order: username, phone number, verification code, password, and password confirmation.
- After completing the form, click register to be redirected to the login interface where you can log in.
- Users with existing accounts can log in directly to use the service.
- Note: Registered accounts are default management accounts that allow access to the backend for product entry, device management, and personnel management.
3.3. Customer Filing
- From the homepage, you can enter four types of detection mode windows.
- Click on "Start Skin Test" to enter the customer profile creation interface.
- Click on "Add New Customer" at the bottom right corner, fill in the customer information as required, and click "OK" to enter the photo-taking interface after completion.
- If you need to batch create new customer profiles, you can select "Customer Management" from the bottom navigation bar on the main interface, and then choose "Add New Customer".
3.4. Skin Measurement and Photographing
- Upon entering the camera page, click the top right corner to select the face you need to photograph (left face, right face, front face).
- Follow the voice prompts to position yourself correctly, close your eyes, and click the photo button to start taking photos.
- Once all required faces are photographed, submit and upload for analysis.
- Note: The domestic trade version does not require selection of skin tone; the real and virtual contrast is for position comparison of customers who have already been photographed.
3.5. Moisture Detection
- To access the moisture analysis page from the skin analysis page, click on the start detection button.
- Follow the prompts to place the moisture meter flat against the corresponding area of the facial skin.
- Click the capture button on the moisture meter to obtain the moisture value.
- After completing the detection of all four areas, click submit to enter the moisture analysis page.
3.6. Report Sharing and Printing
- On the upper right corner of the comprehensive report page, click the share button to choose between obtaining the report via QR code or sending the report via email.
- You can also select the print button to print the report.
3.7. Case Entry
- On the Spectral Imaging and Analysis page, clicking the icon on the right side can record the current image as a case.
- Sequentially select the department, test item, case category, stage of care, and remarks description.
4. Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your device.
4.1. Safety Warnings
WARNING:
- Maintenance work should only be carried out by personnel with after-sales qualifications or repair personnel familiar with this instrument.
- Before maintaining this instrument, the power should be cut off and the power cord should be pulled out of the power outlet.
- Performing maintenance on the equipment while it is still powered could result in personal injury and damage to the instrument.
NOTE:
- The entire cleaning process should prohibit the cleaning solution from flowing into the instrument to prevent electrical leakage or corrosion of the USB socket, which could lead to poor contact.
4.2. General Care Instructions
- Avoid the inflow of harmful gases and corrosive liquids into the instrument. Water is strictly prohibited from entering the main unit to prevent a decrease in insulation performance, which could lead to electric leakage and personal injury.
- The entire machine should be used in a dry and ventilated area, and should be covered with a cloth when not in use.
- The instrument is prohibited from collision, as it contains precision electronic circuits. Please do not attempt to open it without authorization.
- The instrument should always be kept clean, and a soft, semi-dry cotton ball should be used for cleaning. Cleaning should be done with 75% alcohol, and organic solvents such as acetone are prohibited. During cleaning, the cleaning solution should not seep into the instrument, and high-temperature sterilization should be avoided.
5. Troubleshooting (General Questions and Answers)
Refer to the table below for common issues and their solutions.
| No. | Problem Point | Solution |
|---|---|---|
| 01 | Moisture cannot be detected | The micro moisture meter USB cable is not connected to the tablet. |
| 02 | Wf/sf management fails to report | First, enter the corresponding weight or sleep duration data as prompted by the page. |
| 03 | Sunscreen testing will not be conducted. | Sunscreen testing requires applying sunscreen products and then taking photos. |
| 04 | Case entry point not found | On the right side of each detection indicator analysis page. |
| 05 | The brush tool function cannot find the save image option | At the very bottom of the comprehensive skin analysis report. |
| 06 | Cannot find the language settings window | In the navigation bar at the bottom of the home page General settings of Management Center. |
| 07 | How to enter products | Log in to the web page on the computer end. |
6. Specifications
Detailed technical specifications for the X5/X5 Pro AI Skin Image Analyzer.
6.1. Electrical Parameters
| Parameter | Value |
|---|---|
| Input | 100~240VAC 50/60HZ |
| Frequency | 50/60HZ |
| Impedance | 50Ω |
| Output Power | 0-30W RATED CURRENT: 1A |
| Power Supply Voltage | 100~240VAC |
Safety Note: The power cord used for this instrument complies with national safety standards. It is imperative to use wall outlets or power strips with safety-certified national standard wires for operational safety.
6.2. General Specifications
| Attribute | Value |
|---|---|
| Voltage | Below-50V AC (Safety Extra-Low Voltage AC, SELV AC) |
| Is Batteries Included | No |
| High-concerned chemical | None |
| Material | Resin |
| Brand Name | MYOSLIM |
| Origin | Mainland China |
| Certification | CE, RoHS |
| Power Type | Electric |
| Power Source | 110V/220V |
| Use | Bikini (Note: This might be a misclassification, likely intended for general skin analysis) |
| Item Type | Epilator, Oral Irrigator (Note: This might be a misclassification, likely intended for skin analysis device) |
| Pixels | 12million dual-photo hd pixel alquisition |
6.3. Package Dimensions and Weight
- Length: 10 cm
- Width: 10 cm
- Height: 10 cm
- Weight: 10.0 kg
7. Warranty and Support
This section outlines the warranty terms and conditions for your X5/X5 Pro AI Skin Image Analyzer.
7.1. Warranty Coverage
- The host comes with a one-year free warranty and offers long-term after-sales repair services.
- During the warranty period, users are entitled to unified after-sales service and the policy of replacing warranty parts.
- During maintenance, a valid warranty certificate for the purchase of the machine must be presented. The warranty period is valid from the date of the instrument's factory shipment.
- After repair, if the same component and the same failure phenomenon reappear, free maintenance is provided within 90 days.
- Parts repaired or replaced during the warranty period belong to the after-sales maintenance network, while parts repaired or replaced after the warranty period belong to the user.
- Additional services and non-factory configured gifts promised by each regional distributor are to be maintained by the distributor themselves.
7.2. No Warranty Coverage
The warranty does not cover the following:
- X5/X5PRO-AI Skin Image Analyzer accessories and free gifts.
- Damage caused by the user's improper handling, use, maintenance, and storage.
- Damage caused by using voltage lower than 100 volts or higher than 240 volts.
- Damage caused by not using, maintaining, and maintaining the product in accordance with the instructions in the product manual.
- Non-related after-sales service personnel disassembly, repair.
- Without the permission of our company, using accessories and products provided by non-related after-sales service personnel, resulting in instrument damage or other issues.
- Due to force majeure (such as lightning, fire, earthquake, flood, and other natural disasters) causing damage.
- The product is past the warranty period.
- The model or number recorded on the invoice or warranty card does not match the actual product.
In the above cases, the after-sales service personnel will implement paid repairs, which include repair fees, parts fees, and on-site service fees. The specific fee standards are within the scope permitted by the relevant departments.
7.3. Warranty Card
A warranty card is provided with the product. Please fill it out immediately upon purchase and keep it safe. Valid proof of purchase is required for repairs.
For further item guides and documents, please refer to the official user manual PDF: User Manual (PDF).
8. User Tips
- Ensure all cables are securely connected before powering on the device to avoid detection issues.
- Regularly clean the device with 75% alcohol, avoiding harsh solvents, to maintain hygiene and performance.
- Always follow the voice prompts during skin analysis for accurate positioning and consistent results.
- Keep the instruction manual and warranty card in a safe place for future reference and warranty claims.