Osram LEDriving SL Advance 2980CW

Contents

OSRAM LED T10 W5W 194 LEDriving SL Advance Car Bulb Instruction Manual

Model: LEDriving SL Advance 2980CW

1. Product Description

The OSRAM LEDriving SL Advance 2980CW bulbs are high-quality LED replacement lamps designed for various automotive interior lighting applications. These bulbs provide a cool white light at 6000K, offering superior brightness and a modern aesthetic. Engineered with German quality LED chips, they ensure long life, low heat generation, and efficient energy consumption, protecting your car's electrical lines.

These bulbs are designed for easy plug-and-play installation without the need for wiring modifications.

OSRAM LEDriving SL Advance T10 W5W 2980CW product packaging showing two bulbs and product features.

OSRAM LEDriving SL Advance T10 W5W 2980CW Product Packaging

2. Safety Information

  • Risk of Electric Shock: Always disconnect power to the vehicle's electrical system before installation.
  • Hot Surface: The bulb may become very hot during operation. Do not touch it immediately after use.
  • Eye Safety: Do not look directly at the light source to avoid eye damage.
  • Proper Installation: Improper installation may cause glare or trigger vehicle system errors.
  • Professional Installation: Professional installation is recommended if you are unfamiliar with vehicle electronics.
  • Product Integrity: Do not dismantle, modify, or use the product outside its rated voltage and specifications.

3. Package Contents

Each package contains:

  • 2 x OSRAM LED T10 W5W 194 LEDriving SL Advance 2980CW Bulbs

4. Specifications

FeatureSpecification
Brand NameOsram
ModelLEDriving SL Advance 2980CW
Interface TypeT10 (W5W/194)
Voltage12 V
Wattage1.5 W
Color Temperature6000K (Cool White)
Luminous Flux100 LM
Item TypeInterior Lighting
PurposeFor replace/repair
OriginMainland China
Table of product parameters for OSRAM LED T10 W5W bulbs.

Detailed Product Parameters

5. Setup and Installation Instructions

Follow these steps carefully to install your OSRAM LED bulbs:

  1. Preparation: Turn off the vehicle's engine, disconnect the power to the relevant lighting circuit (e.g., by removing the fuse or disconnecting the battery), and allow the headlight assembly or interior light fixture to cool down completely.
  2. Access: Open the hood (for exterior lights) or access the interior light fixture. Remove any dust covers or housing components as required to reach the bulb.
  3. Remove Old Bulb: Carefully unplug the connector from the old bulb and then remove the old bulb from its socket.
  4. Insert New Bulb: Insert the new OSRAM LED bulb into the socket. Avoid touching the glass or LED chip directly with your bare hands; use gloves or a clean cloth if necessary.
  5. Check Polarity: These LED bulbs distinguish between positive and negative poles. If the bulb does not light up after installation, remove it, rotate it 180 degrees, and reinsert it.
  6. Secure Connection: Lock the bulb into place securely and reconnect the power plug.
  7. Reassemble: Reinstall any dust covers or housing components to ensure proper sealing and waterproofing.
  8. Test: Reconnect power and test the light function before fully reassembling the vehicle or driving.
Diagram detailing OSRAM LED bulb features and polarity, showing easy installation.

Bulb Features and Polarity for Installation

Visual examples of practical applications for OSRAM LED bulbs in a car, including turn signals, door lights, and interior lights.

Practical Applications for OSRAM LED Bulbs

6. Operating Instructions

Once installed, the OSRAM LEDriving SL Advance bulbs operate like standard automotive bulbs. They provide instant full brightness without a

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.